To avoid these ads, REGISTER NOW!

Home Depot Clearance Thread 2016

Status
Not open for further replies.
S

ShakinLM7

Well-known member
Joined
Dec 12, 2015
Messages
284
The.Handyman said:
Oooh, let's go hunting! There is also a reconditioned one on the floor I am going to try and get.

754b80bb94c42c607311e1de840180d1.jpg


Sent from my SM-G900P using Tapatalk
Click to expand...

Good luck! Tried that one myself and they stuck to their guns on generic sku that was stamped into the the frame....
 
To avoid these ads, REGISTER NOW!
S

Spn1025

Banned
Joined
Mar 11, 2015
Messages
5,113
Location
New Hampshire
The.Handyman said:
Mine for $49 after some debate with the store manager. It's definitely a well-used reconditioned unit but still a good deal.

6bb8e580203b56d7910f9c126306e4f0.jpg


Sent from my SM-G900P using Tapatalk
Click to expand...

Is there a reconditioned SKU engraved on it? If not, rip that tag off, wheel it up to checkout, and show them the picture with the $49 and real SKU


Edit: NVM, congrats!
 
T

The.Handyman

Well-known member
Joined
Aug 20, 2015
Messages
186
Location
Jacksonville, FL
Spn1025 said:
Is there a reconditioned SKU engraved on it? If not, rip that tag off, wheel it up to checkout, and show them the picture with the $49 and real SKU


Edit: NVM, congrats!
Click to expand...
This one actually didn't have a reconditioned number engraved on it. It did have 2 spots where a white with 15 or so digits was stuck to it. The other ridgid Generator I bought last week had the reconditioned # engraved.

Sent from my SM-G900P using Tapatalk
 
D

drwheels

Well-known member
Joined
Mar 12, 2011
Messages
1,999
Location
okla. city ok
nohcho said:
I think this deal is east coast only. Here in wa state they are full priced.

Sent from my LG-H830 using Tapatalk
Click to expand...

It was good here sunday. I am not on east coast. Good luck Got a pair of 12 inch milwaukee pliers at$5.03 and a pack of punches for $2.83.A garden hose at $7.53 at another store. 2 pack crescent needle nose still at $14.05.
 
Last edited:
S

S4cruiser

Well-known member
Joined
Sep 11, 2013
Messages
587
Location
NC
Found a couple penny nutones, the led ones. Also picked up a few of the m12 kits withe free batteries. Found some dewalt 12" pry bars for 3.34, I'll add the sku later.

Anyone know how long the m12 kits have been at 135.00...wondering when they may drop lower.
 
D

DanielSimpsonDay

Banned
Joined
Apr 9, 2016
Messages
411
c606194b-2134-45e4-a673-058e2049e0a6_1000.jpg


Got one for $140. Anyone know what the difference between this one and the one for $100 in PCA.

Another penny bar and chain, I'll give that one to a good friend.
 
A

AdamRos19

Well-known member
Joined
Mar 27, 2016
Messages
130
Location
Joliet, IL
Spn1025 said:
lol why are so many people "following" me on Tapatalk
Click to expand...

Likable guy? Waiting to see pic of penny collection in your garage? Waiting for security cam footage of Home Depot SCO allegedly of you in daisy Dukes and a cart full of penny items? Desperation of discovering your secret? Free penny item give away?
 
S

swedish88

Well-known member
Joined
Nov 24, 2015
Messages
177
What are the odds that as I walk up to SCO there just so happens to be another penny hunter trying to checkout and gets stopped just in time for me to scan my nutone bathfan, pay, and grab my receipt. I walked out slowly toward the exit just so I could see what happened. The CSR waved a manager over and pointed out that the guy had penny items and then guy told them there was a bunch more he was gonna grab then the manager said let him have it. WTH I was forced to pay last clearance price on an item not too long ago and they just give him the items. Good for him but it just goes to show not all employees and managers are the same, store/corporate policy is a joke it just comes down to who you know. Now I know which manager to talk to if I get stopped ever again.
 
D

DanielSimpsonDay

Banned
Joined
Apr 9, 2016
Messages
411
Stoutone said:
$140 kit is in a bigger box and brushless, unlike the $200 four piece kit that was thought to be brushless.
Click to expand...

Cool, thanks.

Oh and for penny items, it helps to go near closing when the employees are bored out of their minds and counting the minutes until closing. The SCO walks over to chat with others and you can go right through no problem.
 
To avoid these ads, REGISTER NOW!
L

laddy

Active member
Joined
Oct 25, 2009
Messages
42
Location
Central Ohio
8Dd8Yz5.jpg


This is the discontinued one correct? This stor had a ton of them they also had a bunch of other discontinued stuff at at full price. However did get some penny razor blades so not a total loss.

I would like to say thank you to everyone in this thread I now always check the pca when I'm at home depot if I can find an open computer. They all seem to be super slow but beggars can't be choosers.

Sorry for size not sure how to shrink.
 
Last edited:
S

swedish88

Well-known member
Joined
Nov 24, 2015
Messages
177
laddy said:
8Dd8Yz5.jpg


This is the discontinued one correct? This stor had a ton of them they also had a bunch of other discontinued stuff at at full price. However did get some penny razor blades so not a total loss.

I would like to say thank you to everyone in this thread I now always check the pca when I'm at home depot if I can find an open computer. They all seem to be super slow but beggars can't be choosers.

Sorry for size not sure how to shrink.
Click to expand...
Those should be pennied, start loading those bad boys up and go through SCO.

Sent from my SM-N910P using Tapatalk
 
E

emachado

Well-known member
Joined
Feb 3, 2016
Messages
270
Location
Puerto rico
laddy said:
8Dd8Yz5.jpg




This is the discontinued one correct? This stor had a ton of them they also had a bunch of other discontinued stuff at at full price. However did get some penny razor blades so not a total loss.



I would like to say thank you to everyone in this thread I now always check the pca when I'm at home depot if I can find an open computer. They all seem to be super slow but beggars can't be choosers.



Sorry for size not sure how to shrink.
Click to expand...



Can't see photo
 
H

HomeDepotRob

Banned
Joined
Mar 12, 2015
Messages
299
laddy said:
8Dd8Yz5.jpg


This is the discontinued one correct? This stor had a ton of them they also had a bunch of other discontinued stuff at at full price. However did get some penny razor blades so not a total loss.

I would like to say thank you to everyone in this thread I now always check the pca when I'm at home depot if I can find an open computer. They all seem to be super slow but beggars can't be choosers.

Sorry for size not sure how to shrink.
Click to expand...



This your chance to score!! go for it!!
 
C

csmitty

Well-known member
Joined
Dec 17, 2010
Messages
1,542
HomeDepotRob said:
This your chance to score!! go for it!!
Click to expand...



I was gonna ask if that really was a HD store as that floor is bizarre. But there's the bay marker right in the back ground.

That's your new favorite store. They must not even have a MET team there.
 
J

Jarreds

Well-known member
Joined
Apr 18, 2016
Messages
92
laddy said:
8Dd8Yz5.jpg


This is the discontinued one correct? This stor had a ton of them they also had a bunch of other discontinued stuff at at full price. However did get some penny razor blades so not a total loss.

I would like to say thank you to everyone in this thread I now always check the pca when I'm at home depot if I can find an open computer. They all seem to be super slow but beggars can't be choosers.

Sorry for size not sure how to shrink.
Click to expand...

Fyi. Last price was 45.03 just in case they will not give it to you for a penny.

I would test the waters with the SCO first. Try getting a smaller Penny Item through and see if they care before you try to roll a cart full of big compressors through for a penny each.

I would check the PCA to verify the price first. Hopefully there's not a **** head manager there that refuses to drop the price on anything and it's not truly full price, but I doubt it.

Sent from my SM-G920V using Tapatalk
 
D

DanielSimpsonDay

Banned
Joined
Apr 9, 2016
Messages
411
M4A1Carbine said:
Details? Clearance at .03?
Click to expand...

Only one I've seen. It was $140.00, I think regular price is $299. I doubt you'll find one for .03 except for a unicorn. Another store had 2 in the PCA but they are no where.

I want the milwaukee 12v combo set for $135 plus battery but everything around here is regular price $269.
 
Last edited:
C

csmitty

Well-known member
Joined
Dec 17, 2010
Messages
1,542
Headed to work.

381280ccf5a20115362ae275b9a38c7c.jpg


20" finally hit .03 here. Pliers on the floor will never hit a penny here. Glad they hadn't updated the sticker yet
 
T

Thedevilsequal

Well-known member
Joined
Aug 21, 2015
Messages
208
Good night for me last night. Two more husky 52" boxes. Two echo backpack blowers. A crapload of milwaukee/dewalt hand tools.
 
T

Thedevilsequal

Well-known member
Joined
Aug 21, 2015
Messages
208
honda pc said:
Pics.. Or it didn't happen

Sent from my SM-N920V using Tapatalk
Click to expand...

It happened.......
View media item 60644
It was 11:30 when I got home and 12:15 by the time I unloaded by myself as the wife already went to bed. Hand tools were still in the truck, the other box set is behind this one and the husky job box is from two nights ago for a penny. I paid 100$ for each toolbox and 65 for the blowers.
 
M

mopar ken

Active member
Joined
Nov 25, 2012
Messages
39
Some people have all the luck I'm still looking for that 52" box here in Utah and no luck sofar

Sent from my KYOCERA-E6560 using Tapatalk
 
S

Sh40674

Well-known member
Joined
Jan 8, 2014
Messages
1,428
Location
Iowa
Someone had posted a new markdown schedule for percent off clearance items... I can't find it, anyone know what it is? Trying to figure something out .
 
Status
Not open for further replies.
To avoid these ads, REGISTER NOW!
Top Bottom