Buckgnarly
Well-known member
Lowe's had the thermometer marked for 19.98 in store, but when I checked at the checkout it was 9.98. Used my vet discount also, plus the free Bostich level....was a good night!
HOT DEAL Index!!
- Thread starter Stuey
- Start date
- Status
I'm assuming he's talking about the buy a Bostitch knife, get a free torpedo level deal @ lowes - (which expires tomorrow people!) I got myself another set this evening... the knife i thought was stupid at first turned out to be pretty cool... Both for $8, cant argue with that.
My General thermostat was also marked as $20 in store, but rang up $10.
HEY....we bought the exact same 3 items tonight!
My General thermostat was also marked as $20 in store, but rang up $10.
HEY....we bought the exact same 3 items tonight!
precisiontech
Active member
Have a MSC Industrial Supply coupon code good until Friday.
www.mscdirect.com
Use code FOURTHF on orders over $199 and receive 30% off any reguarlly priced items.
www.mscdirect.com
Use code FOURTHF on orders over $199 and receive 30% off any reguarlly priced items.
Buckgnarly
Well-known member
Yup, the Bostich deal.....buy one cheap item, get a free level. Funny b/c I looked in that store a few days ago for that deal, could not find it, but stumbled upon it tonight,
bczygan
Well-known member
My Lowes had both the moisture meter and digital thermometer. Under $10 each. Used a gift card online and snagged both and the last 5 USA made Kobalt wrenches in the store for a dollar each. A pain to use the gift card. Nowhere does it say where the PIN number is (It's under a wavy sticker on the back). 866 number on receipt is wrong. 800 number they refer you to dumps you off and when you finally get on requires the PIN number to proceed!!!!!
I just wanted to say thanks for the heads up on the Wera @ Amazon, I've been watching pretty close for the last few months up until this week (busy week), so once again, thanks!
I just picked up the Kraftform Plus 932/6 Chiseldriver for $37.33 and the Kraftform Plus Lasertip 334/6 for $30.23! I'm really happy now! I just hope none of the PB Swiss or Felo sets go on sale until next month now.
sharkytm
ALLIANCE MEMBER
You *******, I had the 932/6 set in my cart, and didn't check out, even though there were only 2 left in stock. I added the 334/6, and checked out... bingo, no more 932/6 left.
Grr.
alohavw
Well-known member
Just got back from lowes and they said that they didn't have it in stock and told me the order was cancelled without sending me an email. The lady basically told me, "too bad it wasn't her fault she does not control the computer system". Customer service at lowes Federal Way,WA has gone downhill lately, I think it's time to switch to Home Depot. Was charged and posted on our account for the product and couldn't get a refund as we were told there is nothing they could do. Pretty sad that I have to go thru the hassle to contact corporate about this.
Last edited:
I sadly knew where to go without ever even seeing it before. General brand tools are generally (no pun intended!) located around the wood working power tools/accessories. They have their only little small end cap section usually. Thats where mine was. A laser thermometer under wood working tools.
rice rocket
Well-known member
- Joined
- Mar 24, 2011
- Messages
- 3,175
CorcoranCrawler
Member
- Joined
- Feb 7, 2011
- Messages
- 22
Will someone please buy this and save me from myself. I can't hold out much longer!!! It goes to 32mm!!!! Beta ratcheting wrench set 19 piece 6-32mm $281 only one left please HELP!!!!!!
http://www.amazon.com/dp/B003E36C3E/?tag=atomicindus08-20
http://www.amazon.com/dp/B003E36C3E/?tag=atomicindus08-20
mrbreezeet1
Banned
Never heard of Beta, are they any good.
Think there made in Italy.
Thanks,
Tony
I've ordered a few beta tool items from amazon. Honestly, I wasn't all that impressed. Quality seemed hit or miss depending on the item.
shanker
Well-known member
I picked up my Lowes thermometer....i've actually been wanting one too
acamato
Well-known member
I took advantage of Lowe's tonight.
I checked the price on the thermometer last night it was $20. I went in tonight to look for it and to see if the price lowered. I couldn't find it, however I found the last of the Kobalt clearance tools. I got the following
1/2" drive deep metric sockets (15,16,17,18,19 & 21) for $0.50 ea
11/16" Gearwrench for $1
3/8" drive to 1/4" drive adapter for $.50
1/4" plastic socket rail for $0.75
I went home and checked online and they had a thermometer in stock for $9.97. I ordered it online and picked it up 30 mins alter along with the Bostich dual blade knife and free level.
I checked the price on the thermometer last night it was $20. I went in tonight to look for it and to see if the price lowered. I couldn't find it, however I found the last of the Kobalt clearance tools. I got the following
1/2" drive deep metric sockets (15,16,17,18,19 & 21) for $0.50 ea
11/16" Gearwrench for $1
3/8" drive to 1/4" drive adapter for $.50
1/4" plastic socket rail for $0.75
I went home and checked online and they had a thermometer in stock for $9.97. I ordered it online and picked it up 30 mins alter along with the Bostich dual blade knife and free level.
sarel.wagner
Well-known member
With most of the SBK and MotoGP teams using BETA tools? Oh and some F1 teams too
Got some Beta tools and they very good quality, well the ones I got anyhow.Rgrds
darkbuddha
Well-known member
Anyone got any good ideas on how to spend the $100 in Sears gift cards I got for father's day? I could probably use just about anything... of course, I need a new floor jack too.
I picked up one of the general thermometers from the lowe's deal. The readings seem less consistent than others I've used. For example, if I take some readings, get something consistent, put it in my pocket (display hanging out) for a few minutes, and take more readings, they are 5-7 degrees (F) lower. If it's just sitting out for a while and you take measurements, it seems really accurate. But as you play with it, shooting different stuff, just handling it, the readings that once seemed accurate might now be reading 3 or 4 degrees different.
IR guns are always finicky in this way, in my experience, but this one seems a little more so. It's a good buy at $10, you just need to play with it to find the limitations and adjust your expectations for accuracy.
IR guns are always finicky in this way, in my experience, but this one seems a little more so. It's a good buy at $10, you just need to play with it to find the limitations and adjust your expectations for accuracy.
shanker
Well-known member
Im finding that this temp gun is only accurate within 18 inches or so of the target..
the one we have at work, is accurate at a MUCH greater distance
the one we have at work, is accurate at a MUCH greater distance
Consider that the area the temp gun reads for temperature is cone shaped (in other words gets bigger as the distance increases). So if you hold it 1" from a surface, it reads, say a 2" square area. If you hold it 1' from the surface, it now reads a 2' area. Think of a flashlight and how the beam grows as you increase the distance. Same thing.
The actual numbers are made up in this example, but the principle applies. Check the users manual, it probably has an illustration with numbers.
Here's a generic illustration:
The actual numbers are made up in this example, but the principle applies. Check the users manual, it probably has an illustration with numbers.
Here's a generic illustration:
Last edited:
les_garten
Banned
Consider that the area the temp gun reads for temperature is cone shaped (in other words gets bigger as the distance increases). So if you hold it 1" from a surface, it reads, say a 2" square area. If you hold it 1' from the surface, it now reads a 2' area. Think of a flashlight and how the beam grows as you increase the distance. Same thing.
The actual numbers are made up in this example, but the principle applies. Check the users manual, it probably has an illustration with numbers.
Here's a generic illustration:
I've got a pretty decent one from Raytek. Your illustration certainly demonstrates how these work. Mine will get accurate temps from like 10 feet away, it's amazing. I shoot the attic temps from the garage floor before I climb up into the attic. I'm sure I paid a couple hundred for mine.
diggerrick
Well-known member
- Joined
- Dec 1, 2010
- Messages
- 996
OK, not really a "hot deal" (not bad though), but something worth having around:
http://www.harborfreight.com/merchandising-promotions/merchandising/4th-of-july-sale-2011-html/10-person-first-aid-kit-42132.html
You're not afraid of a Chinese bandaid are you?
http://www.harborfreight.com/merchandising-promotions/merchandising/4th-of-july-sale-2011-html/10-person-first-aid-kit-42132.html
You're not afraid of a Chinese bandaid are you?
Weps
Well-known member
i'd rather take my chances with a used kleenex and some super-glue, thanks.
blue dog
Banned
Not sure if these are made in the USA or not, if so, not a bad deal.
http://www.amazon.com/dp/B004HZIL7S/?tag=atomicindus08-20
http://www.amazon.com/dp/B004HZIL7S/?tag=atomicindus08-20
They are china, any Allen part number with a "G" on the end is china made
tankboy_taylor
Well-known member
thanks for the heads up!
had to grab one of these didnt relize they made that ratchet in 1/4 drive and at that price couldnt resist. I prefer sk 1/4 ratchets to my snap ons
greasemonkey44
Well-known member
man im getting it, im a sucker for 1/4" sets must have 4 or 5 but this is my first sk
filtered
Well-known member
mygofer is a sears store. I've ordered from them before, they are ok.
Promo code JULY4 for 10% off tools. Free ground shipping on tools.
DeWalt DC725KA 18-volt Cordless 1/2'' Hammer Drill Kit $94.04 plus tax shipped
http://www.mygofer.com/shc/s/p_10175_27151_00928368000P
GearWrench 8 pc. Full Polish Reversible Ratcheting Combination Wrench Set
These are 36.99 plus tax a set shipped.
Metric http://www.mygofer.com/shc/s/p_10175_27151_00944004000P
SAE http://www.mygofer.com/shc/s/p_10175_27151_00944003000P
there's some other decent deals, just got to search for them.
Promo code JULY4 for 10% off tools. Free ground shipping on tools.
DeWalt DC725KA 18-volt Cordless 1/2'' Hammer Drill Kit $94.04 plus tax shipped
http://www.mygofer.com/shc/s/p_10175_27151_00928368000P
GearWrench 8 pc. Full Polish Reversible Ratcheting Combination Wrench Set
These are 36.99 plus tax a set shipped.
Metric http://www.mygofer.com/shc/s/p_10175_27151_00944004000P
SAE http://www.mygofer.com/shc/s/p_10175_27151_00944003000P
there's some other decent deals, just got to search for them.
Not exactly a tool, but I'm sure a lot of you would be interested:
Purolator PureONE oil filters - As low as $.33 each + tax @ Advance Auto + MIR
These are on sale for $5 each. If you buy 3, and use code BIG5, it will knock the price down to $10 (3 @ $3.33/each). After the MIR, the price is $1 for 3 ($.33 each!) It's free store pick-up, and you'll have to pay tax. Not a bad price on these filters. Very high quality.
Get a $9 rebate HERE
Purolator PureONE oil filters - As low as $.33 each + tax @ Advance Auto + MIR
These are on sale for $5 each. If you buy 3, and use code BIG5, it will knock the price down to $10 (3 @ $3.33/each). After the MIR, the price is $1 for 3 ($.33 each!) It's free store pick-up, and you'll have to pay tax. Not a bad price on these filters. Very high quality.
Get a $9 rebate HERE
jakeb
Well-known member
It looks like you can get the same thing directly from sears with instore pickup. I am showing the SAE and metric gearwrench for $33.99 before tax....
I don't like how with these reversible gearwrench you can only put them on the fastener from one side...
WRX/Z28
Well-known member
Craftsman Gold Sockets.
I'm sure these are more of a collectors thing, but for $20, I think they're worth collecting.
http://www.sears.com/shc/s/p_10153_12605_00934177000P?prdNo=1&blockNo=1&blockType=G1
Can't seem to find the Gold ratchets they had with them...
I'm sure these are more of a collectors thing, but for $20, I think they're worth collecting.
http://www.sears.com/shc/s/p_10153_12605_00934177000P?prdNo=1&blockNo=1&blockType=G1
Can't seem to find the Gold ratchets they had with them...
NoSloCoupes
Well-known member
Was looking for some garage cabinets and found these... http://www.mygofer.com/shc/s/p_10175_27151_00910131000P?keyword=craftsman+wall+cabinet&prdNo=1# . I'd probably order them if it weren't for the red.
Also looking at the Sevilles at Sams club.
Also looking at the Sevilles at Sams club.
DrunkSmurf
Well-known member
True Value has a 40% off any item under $40 coupon in their current ad, ends tomorrow.
- Status