HOT DEAL Index!!

[nahudson]

Note sure if this is a good deal, but I thought I would post it

GearWrench 40 Piece SAE Tap & Die Set 3885

US $69.99

http://www.ebay.com/itm/GearWrench-...t-3885/360421098128?_trksid=p1468660.m2000037

 

[Need4racin]

Hmm should I get metric or sae socks? Deep or short well?

 

[kc-steve]

Snap-on Industrial Brand JH Williams 31925 13-Piece 3/8-Inch Drive Shallow 12 Point Socket Set

Price: $30.42

http://www.amazon.com/dp/B005VMQMGS/?tag=atomicindus08-20

Just an FYI, I don't see anything about them being made in the USA so it might not be such a good deal after all. But thanks anyway.

Steve

 

[ishiboo]

Just an FYI, I don't see anything about them being made in the USA so it might not be such a good deal after all. But thanks anyway.

Steve

Fairly certain those JH Williams sets are Made in Taiwan. I bet they're great quality.

 

[kc-steve]

Fairly certain those JH Williams sets are Made in Taiwan. I bet they're great quality.

They might be great quality Taiwanese but for $30? I'm pretty sure you can find Taiwanese sockets at that price anytime.

Steve

 

[east_tn_emc]

Kobalt 40 piece 3/8 standard-and-metric socket set...24.99 regularly 49.99.

http://www.lowes.com/pd_338512-2232...currentURL=/pl__0__s?Ntt=kobalt+40&facetInfo=

 

[toolmaker1]

Craftsman Socks?

If they get a hole in them, can you exchange them for a new one?

actually yes if you keep the receipt you can warranty them for a period of two? years I believe if they wear out

 

[les_garten]

actually yes if you keep the receipt you can warranty them for a period of two? years I believe if they wear out

Unbelievable!

No really...

I don't believe it!

Thanx!

 

[nahudson]

Craftsman 9 pc. Metric 12 pt. 1/2 in. dr. Easy-to-Read Socket Accessory Set
The picture shows made in USA

19.99

http://www.sears.com/shc/s/p_10153_12605_00934573000P?prdNo=8&blockNo=33&blockType=G33

 

[nahudson]

SK 6 pc. Ball Hex Bit Socket Set, SAE
Reg:44.99
Clearance:24.97

http://www.sears.com/shc/s/p_10153_12605_00930508000P?prdNo=11&blockNo=111&blockType=G111

 

[dayid]

Craftsman 9 pc. Metric 12 pt. 1/2 in. dr. Easy-to-Read Socket Accessory Set
The picture shows made in USA

19.99

http://www.sears.com/shc/s/p_10153_12605_00934573000P?prdNo=8&blockNo=33&blockType=G33

I grabbed this exact set in-store just a few days ago. Mine are marked USA.

 

[volpster31]

Craftsman Heavy Duty socks were 55% off at my local Sears in Salem, NH. I had to do a double take: Made in USA. YMMV.

these socks are awesome!!!!! i stocked up on them the last time they were on sale.. and YES theyre made in the u.s.a
http://www.sears.com/shc/s/p_10153_12605_033J0240000P?prdNo=1

http://www.sears.com/shc/s/p_10153_12605_033J0220000P?prdNo=4

 

[jshillin]

Do these fit large or small, or accurate? I bought dickies shirts that were huge on me...

If you are broad across the shoulders it won't fit well at all... I bought one in my normal size (XL) when they were on sale last time and never wear it for that reason.

 

[Danglerb]

Do these fit large or small, or accurate? I bought dickies shirts that were huge on me...

My only issue with Dickies are the variations they have in sizes, especially sleeve length as in too short, huge shirts, etc. Jackets have been mostly fine, all work well for me, warm but ventilated.

 

[robertwhite]

Found these Ridgid 7 1/4" 24T Titanium coated, carbide tipped circular saw blades in Home Cheapo for $2.73. Amazon and others are selling them for $20+ http://www.ridgid.com/Tools/Framing-Saw-Blades/

There is no such number in HD website, but the number on my receipt and on the blade sticker is 008925038733 and the Ridgid item # is R0724B.

I bought 4 and left a couple for other bargain hunters.

 

[mdbeck1]

That Bosch drill...want!
It's going to be hard justifying tool "needs" after I get married
Thanks for maintaining this thread, it's nice being able to just look at the first post for the updated deals

Oh contrare..... You need to break her in right. She wants pictures hung -- you need..... a hammer, or a drill or....

...and point out to her her much money you are saving because you do it yourself. That will keep the purse strings a little bit looser around the toolbox.

 

[Mustang1167]

My local Home Depot is marking some of the Dasco Pro items down 25%. Making room for made in china/mexico Dewalt products. Picked up a compass and some brick chisels. In store only
Ive been eyeballin the stuff for months so i pulled the trigger.

 

[srmofo]

Dickies Duck Jackets 50% off:

http://www.dickies.com/search/results.jsp?query=DuckJacketSavings

I bought one of the zipper front in black.

In addition, there are lots of promo codes out there for use on Dickies web site

I used "NEWS" and got $15 off $50. There is free shipping over $50 too. I got the duck jacket, a pair of jeans and a t-shirt shipped for $55.

Thanks for the link, Im always too late to these dickies sales and miss everything in my size. I got a coat, fleece lined sweatshirt, and tshirt for $60. Now lets just hop their size scale on the site is correct.

 

[90gt]

went to sears earlier today and picked up a 106 piece craftsman 1/4" and 3/8" set for ~$13. according to one of the workers, they discontinued this set and thats why it was so cheap...i got the last one in the store.

 

[DENALIAKITAS]

went to sears earlier today and picked up a 106 piece craftsman 1/4" and 3/8" set for ~$13. according to one of the workers, they discontinued this set and thats why it was so cheap...i got the last one in the store.

Do you have an item number? Thanks

 

[radgto]

Not sure if this has been posted yet but it's a smoking hot deal I think.

http://www.tooltopia.com/gearwrench-81900pro.aspx

48 wrenches for $137 shipped = $2.85 each!

 

[KenB]

Sears has Craftsman 9 pc. Tru-grip combo wrench sets, SAE and metric, at $10 (reg. $40):
http://www.sears.com/shc/s/p_10153_...03h&srccode=cii_5784816&cpncode=26-74106412-2

Ken

 

[JMcFly]

If I needed 48 wrenches I'd buy. Same thig about the true grip. I don't need them lol

 

[jonnysteals]

Not sure if this has been posted yet but it's a smoking hot deal I think.

http://www.tooltopia.com/gearwrench-81900pro.aspx

48 wrenches for $137 shipped = $2.85 each!

Are these wrenches polished? Its hard to tell from the picture.

 

[purplezr2]

Are these wrenches polished? Its hard to tell from the picture.

YEs I have the metric set

 

[ToolSnobsSuck]

Sears has Craftsman 9 pc. Tru-grip combo wrench sets, SAE and metric, at $10 (reg. $40):
http://www.sears.com/shc/s/p_10153_...03h&srccode=cii_5784816&cpncode=26-74106412-2

I'm not familiar with those, but at a first glance, they look like maybe a Sears "Harry Homeowner"-marketed tool. Can anyone comment as to the actual quality of the wrenches themselves?

 

[nahudson]

Rockwell Zip Snip All Purpose Cutter - Self Sharpening - 3.6v battery ni-mh
23.95
http://www.ebay.com/itm/Rockwell-Zi...-ni-mh/220930326717?_trksid=p1468660.m2000037

 

[nahudson]

I know nothing about this item, and not sure if good deal or not


69.90

Digital SMD Hot Air Gun Rework Soldering Station 4 Nozzles PLCC BGA

http://www.ebay.com/itm/Digital-SMD...CC-BGA/230727204979?_trksid=p1468660.m2000037

 

[JMcFly]

They do look like that. I'd probably never use them.

 

[nahudson]

DeVilbiss 803421 6" Pneumatic Air Palm Sander

49.99

http://www.ebay.com/itm/DeVilbiss-8...Sander/370570782449?_trksid=p1468660.m2000037

 

[thesilverone]

those true grips are chinese, probably put those grips on to cover up all the grinding marks lol.

 

[ishiboo]

I know nothing about this item, and not sure if good deal or not


69.90

Digital SMD Hot Air Gun Rework Soldering Station 4 Nozzles PLCC BGA

http://www.ebay.com/itm/Digital-SMD...CC-BGA/230727204979?_trksid=p1468660.m2000037

So... why paste it? There's like 8 million items on eBay right now

Not a terrible price for a SMD rework station, but nothing spectacular. Personally I like my soldering station/hot air rework combo, it was $250 for a cheap Chinese unit like that one (Blackjack) but I use it mostly for thru-hole soldering, heat shrinking and from time to time actual SMD rework.

 

[DEMAYO]

those true grips are chinese, probably put those grips on to cover up all the grinding marks lol.

They're from Taiwan. I bought a set yesterday, for 29.99! I'm a little peeved. Will they refund the 20 to my giftcard?

 

[ishiboo]

those true grips are chinese, probably put those grips on to cover up all the grinding marks lol.

Nah, they're probably polished only that far, and instead of forged steel there's a giant hunk of lead holding the two halves together. That or some cut up old fence t-posts.

 

[pipsters]

They're from Taiwan. I bought a set yesterday, for 29.99! I'm a little peeved. Will they refund the 20 to my giftcard?

Sears has a 14 day price match which will give you the $20 + 10%. Outside of that you can buy/return in 90 days so you could just buy them at the new price and return the new set with the old receipt.

 

[ActAppalled]

Not sure if this has been posted yet but it's a smoking hot deal I think.

http://www.tooltopia.com/gearwrench-81900pro.aspx

48 wrenches for $137 shipped = $2.85 each!

Does anyone know if this is a set of long and a set of standard length or two of the same sets. It's hard to tell from the description. I'm looking at these to upgrade/expand my small craftsman rp set.

 

[blackgold]

It looks like 2 of the same set. I don't know...
Brian

 

[JMcFly]

Just left my sears, nothing good. They did have a contour box top for $333. Marked down of course as well as an intermediate ball bearing box that would fit my old box for $100. But I left the there and went to hf and bought stuff. I missed a marked down 13 drawer box. $253, lucky guy got it. Oh well.

 

[nahudson]

Craftsman 8-piece Inch Flat, Full-Polish Ratcheting Wrench Set

39.99

http://www.sears.com/shc/s/p_10153_12605_00922984000P?prdNo=9&blockNo=34&blockType=G34

 

[ActAppalled]

Does anyone know if this is a set of long and a set of standard length or two of the same sets. It's hard to tell from the description. I'm looking at these to upgrade/expand my small craftsman rp set.

I hate to quote my own post but I just got off of the phone with tooltopia and they are both the same sets.