HOT DEAL Index!!

[ishiboo]

http://www.lowes.com/ProductDisplay...gId=10051&cmRelshp=req&rel=nofollow&cId=PDIO1

$179 on Amazon but with a different case.

http://www.amazon.com/dp/B004KMA0YA/?tag=atomicindus08-20

Not a bad deal, I bought this kit when it was on sale for $129 with a 11% rebate at Menards. I don't think the price goes much lower.

 

[lennoxlennox]

GM set on clearance at OReillys

I was there picking up the 5 pc ratcheting wrench set for $5.47 and saw they had 2 sets left of GM1122 for $20.87

http://www.oreillyauto.com/site/c/detail/GDW0/GM1122.oap?pt=N0048


these two sets are added to my lender tools!

 

[dg-garage]

GM set on clearance at OReillys

I was there picking up the 5 pc ratcheting wrench set for $5.47 and saw they had 2 sets left of GM1122 for $20.87

http://www.oreillyauto.com/site/c/detail/GDW0/GM1122.oap?pt=N0048


these two sets are added to my lender tools!

My local price was $26.32. Still a great price and picked up a set to hold at store for pickup. $28.22 total from $109.99. Thanks.

 

[adamsredlines]

Craftsman Club shows the 1/2" drive impact deep sockets for half off for the week. They do this regularly, but with USA stock going away, may be running out of time to get them. I'm going to go see if they have USA ones in the store and grab a set if they do.

 

[Jawn]

I just joined the "Craftsman Club", but it doesn't show me any current deals - says to check back April 13-19, is that when the deep impacts will be on sale?

 

[darkbuddha]

Hello there GRM member.

-HalfTrac.

Right back atcha. It's amazing how small the internet is sometimes.

 

[adamsredlines]

I just joined the "Craftsman Club", but it doesn't show me any current deals - says to check back April 13-19, is that when the deep impacts will be on sale?

Sorry, you're right...the flyer was in the mail and I dont usually get them until mid-sale.

 

[lithdoc]

Craftsman Club shows the 1/2" drive impact deep sockets for half off for the week. They do this regularly, but with USA stock going away, may be running out of time to get them. I'm going to go see if they have USA ones in the store and grab a set if they do.

Anything else worthwhile in the craftsman club ad?

 

[adamsredlines]

Prybars half off again, nothing overly exciting IMO

 

[Jawn]

Right back atcha. It's amazing how small the internet is sometimes.

GRM = Grassroots Motorsports?

Me too... haven't been there in a while. I forget what username I had/have there... might've been RidgeRunner?

 

[srmofo]

Heres another grm member, although I don't do much besides lurk.

 

[billymade]

Enco has free shipping and 50% off deals for april 2012; check it out here:

http://specialoffer.use-enco.com/ho...a994e2aba5218673f258571b9905b6d8&ei=7Kby3apNr

Use Promo Code: HLFSP for Free UPS Ground Shipping on Orders of $50 or More*
Hurry! Offer expires 4/13/12.

 

[c10bonanza]

Picked up one of the Ryobi Laser Levels at Home Depot in Tulsa. Marked $71, rang up for $29.03, and with the Harbor Freight coupon out the door for $25.20! There was one left.

 

[unslow1]

Just left Menard's. They had a bunch of hand tools on clearance. Mostly Tool Shop but a few Irwin. The boltout sockets among them. I wouldn't try to make a living with Tool Shop stuff but not bad for trunk or kids to use.

 

[Lomotil]

Just got my two JEGS mats... They even threw in a free hat!

Thanks for the link, lametec!

(They're up to $13.99 now, BTW...) http://www.ebay.com/itm/400281103966

Here's the hat they sent me:

 

[rmsg0040]

SK 19756 3/8" Drive 6 Piece Metric Ball Hex Bit Socket Set

Retail on tooltopia for $59

ebay 25

Made in USA

 

[warmpancakes]

SK 19756 3/8" Drive 6 Piece Metric Ball Hex Bit Socket Set

Retail on tooltopia for $59

ebay 25

Made in USA

http://www.ebay.com/itm/SK-19756-3-...ultDomain_0&hash=item5649b8daa9#ht_2711wt_845

 

[buening]

Nice deal on those hex sockets, in for one!

 

[lametec]

The SAE counterpart to the metric SK set is $24.97+s&h from Sears.

http://www.sears.com/shc/s/p_10153_12605_00930508000P

 

[wxm]

Nice deal on those hex sockets, in for one!

+1.

 

[Hootbro]

Nice deal on those hex sockets, in for one!

Same here!

 

[rmsg0040]

looks like the metric sk hex set is all out

 

[ckadams00]

GM set is sitting at $109 at all the O'Reiley's in my area . . .

 

[lennoxlennox]

i assume you asked them to price check it... it's listed at 109 here to ...but when they scan it ... it goes down to 20 something... the guy also had a printout sheet that showed it was on the discontinued item list

 

[SocketDeviler]

Just got my two JEGS mats... They even threw in a free hat!

Thanks for the link, lametec!

(They're up to $13.99 now, BTW...) http://www.ebay.com/itm/400281103966

Here's the hat they sent me:

Just received the mat as well. Nice quality. Definitely a good deal. I didn't get a hat though. I'll live. Thanks to the OP for the link.

 

[Scuba Steve33]

If you guys missed out on the mats (not that I wouldn't pay 14 for one, definitely worth it) they always go back to 9.99 every couple weeks.

 

[lithdoc]

It seems that the premium ratchet set is back in stock:

http://www.sears.com/shc/s/p_10153_12605_00929498000P

Any coupons and such to make the deal sweeter? I'd like to bring it down somewhere below $120...

 

[scott37300]

Just received the mat as well. Nice quality. Definitely a good deal. I didn't get a hat though. I'll live. Thanks to the OP for the link.

They didn't send a hat with my order either. I messaged them through ebay and asked why it said it came with a hat and they said they would send one right out. So if you do want one just message them and they will send one out.

 

[JASTECH]

No hex ...0....I snoozed, was with my so so worth it guys!

 

[LOtown]

if anyone bought an extra metric sk kit let me know

 

[txusa03]

Hurry while supplies last...Bosch 18v Lithium combo for $156. Why so cheap

I am very happy with my Hitachi combo for home use so I don't need another one and i don't need a spare one either since my Hitachi has 10 yrs warranty.

http://www.amazon.com/gp/product/B002BXCXHC/?tag=atomicindus08-20

 

[drunken1]

Hurry while supplies last...Bosch 18v Lithium combo for $156. Why so cheap

I am very happy with my Hitachi combo for home use so I don't need another one and i don't need a spare one either since my Hitachi has 10 yrs warranty.

http://www.amazon.com/gp/product/B002BXCXHC/?tag=atomicindus08-20

like the rest of the manufactures, their prolly going with brushless

 

[acer66]

like the rest of the manufactures, their prolly going with brushless

Another reason might be that the batteries are very small, 1.3 to be exact.
My brute version came with 3.0 batteries.

 

[Recoil Rob]

Hurry while supplies last...Bosch 18v Lithium combo for $156. Why so cheap

I am very happy with my Hitachi combo for home use so I don't need another one and i don't need a spare one either since my Hitachi has 10 yrs warranty.

http://www.amazon.com/gp/product/B002BXCXHC/?tag=atomicindus08-20

I bought this back in December for $162, use it all the time, great combo. And it will accept the larger batteries.

 

[SCscoutguy]

I guess this is a good deal if you wanted some import vise grips.
http://www.homedepot.com/webapp/wcs...y?storeId=10051&productId=202959224&langId=-1

 

[volunteers]

I was just looking at Snap-On vise-grip type pliers. Anybody had experience with that? They are not made in U.S and the price is not that high. How do they compare with this Irwin pliers?
http://buy1.snapon.com/catalog/item...682188&supersede=&store=snapon-store&tool=all

http://buy1.snapon.com/catalog/item.asp?item_ID=644851&group_ID=682188

I guess this is a good deal if you wanted some import vise grips.
http://www.homedepot.com/webapp/wcs...y?storeId=10051&productId=202959224&langId=-1

 

[Roots]

I was just looking at Snap-On vise-grip type pliers. Anybody had experience with that? They are not made in U.S and the price is not that high. How do they compare with this Irwin pliers?

The Snap-On are really nice and made in Spain. As for how they compare with the Irwin, well they both work well.

 

[corey4x4man]

I have not yet started pricing channellocks but Fred Meyers has a buy 2 get one free on all hand tools.
Here is the selection.

 

[robertwhite]

OK Folks, I was able to grab 2 more Ryobi laser levels from HD for $29.03 each.

I will be happy to mail them to anyone who can't get one locally for the $29.03 plus tax ($2.75) plus shipping via USPS medium sized flat rate ($11.35) which comes to $43.13 to the lower 48.

USPS money order

I will also take Paypal if you add $1.50 for the fees they would charge me.

1st two people to confirm they want one (via PM) get them.

BTW: I removed both levels from the box and checked to make sure they powered up and had vertical and horizontal lines. They both appear to be functioning just fine.

 

[jhelrey]

I picked 1 up today as well to list for sale. Figure mine is the same $44.00. Money orders are the best!