how many tool boxes do you have??

[gsport]

i've got two seperate shops so i've got two seperate boxes.. how 'bout the rest of you??

 

[I can fix anything]

Just 1 at the shop. If i'm at home I aint workin on nothing

 

[sparky7]

One craftsman right now soon to add another within the next month, probably a us general if i cant swing a deal on CL for a snap on.

 

[larry_g]

3 rollcabs with tops, 2 more top boxes on the benches, and numorus hand carry boxes, plus the tool boxes on the tractors.

GS what do you consider a tool box? Does the drawer in the kitchen with tools count? How about the bag under the seat in the truck?



lg
no neat sig line

 

[poprockcrusher]

3 setups , work box , pit box , sidework box

 

[canuckian]

main box and cart. They're both in the detached garage for now. When I get the attached garage sorted out the cart will go in there.

not sure if they count but I also have a couple of hand boxes to carry in the vehicles.

 

[dodge610]

One Matco triple bay one craftsman top middle and bottom and one HF 5 drawer they are all full and im lookin at getting another what am i nuts oh wait a minute the rule is you can never have too many tools im okay then.

 

[NeilH]

i have 1 shop and i have 1 roll cab and top box (single width)

1 single width roll cab.

and my main box is a 40" double bank (roll cab and top box) with locker and side cab (6 drawer)

 

[Rickster]

I have three lower boxes; 50 in, 36 in and a 26in wide, along with two 36 in top boxes.

 

[Case IH]

I only have one

 

[JeremyManning]

I have a stand up husky model from HD in the garage and a small 2 drawer in the basement for collectibles (the stuff I don't want to rust)

 

[Boost Creep]

i have two

 

[zsuperbee]

5 bottom
4 top
1 mid
1 side cab

and I still need more room

 

[Deafautotech]

At my work, i has KRL1203, KRL1003 combo, Craftsman bottom 40" full wide drawer(6), HF full height Locker mounted on Craftsman, AND Matco MSC12 cart...

At Home, I has top chest West coast chopper (stanley version), Two drawer middle clarke box(homeowner version), Three drawers middle Heavy duty Clarke box(black), Craftsman project center bottom box(almost all slides bents a little).

i has Matco MSC4 cart, Craftsman 8 drawers 40" chest on bottom box where i keep all things that dont fit in drawers( i got it for free as it was custom made and guy said dont want it so gave to me...)

Then i has almost 17 years old sears homeowner combo box that my dad bought it for me to keep my tools in when i was kid as i did worked on lawn mowers engines a lot when i was kid with my dad.. i am still has it.

when i get my own place, i might want bring my KRL combo and buy either Harbor freight or Menards masterforce 56" to go at work... i am still not sure...

 

[Johnny chaos]

I have one top and bottom 60"ish for metric and one 60"ish top and bottom for SAE and metalworking tools, and a 36" top for electrical and diag stuff.

 

[klhitman]

1 cman at work
1 snap on at home
1 cheapo on the bench next the other small cman box
and a tool bag in the car

 

[phoenixautorepairs]

2 40" roll cabs with top boxes 2 26" rollcabs with top and middle boxes 2 full height lockers for the 40" boxes and a half height locker as well and im just about out of room

 

[Chris Adams]

54 inch SnapOn roller, with top box, 56 inch Mac roller, with work top, 56 inch Matco roller with 56 inch General (Torin) top box, 41 inch BluePoint with Snap-on Top box, 36 inch SnapOn under bench, 5 intermediate boxes scattered around the shop. Other boxes in other buildings, including garage, shed, and my wife uses a big Husky box with a Craftsman intermediate for camera gear.


So I guess about 15 in the shop, maybe 5 in the other buildings.

 

[trout]

just a roll cab and top chest. will add more if I ever find the matching mid section or end cab w/ drawers for sale.

 

[bobcatdan]

Krl 1022 at work with a kra 62c on top at work. Classic 60 36" bottom at home. Six drawer craftsman chest back of the pickup. Shop truck has a 8 drawer chest, 3 drawer middle and 5 drawer bottom craftsman. That nice set-up is company supplied.

 

[mrholeshot]

At this time 7 roller cabs, 1 inter chest, 5 top boxes and about 10 portables. The Tupperware tubs and contaniers with tools. Numbers constantly changing

 

[thrifty bill]

Not enough apparently. I am shopping for a tool chest right now.... I have four 26 inch sets, looking to get something longer: 56 inch maybe, then sell off one of the 26'ers.

But I do not work on cars, everything is either bicycle, motorcycle, or home restoration tools (I have two 1934 homes, just picked up one that needs just about everything). So I do not need a super long box.

 

[Kurn]

It's 10° out.I'm not gonna go out and count 'em.

 

[crewchief888]

at work
kr550/555
in my service truck

CM 10 dr top
mac side box unknown model

in the garage

kra 637 '93
kr647 '93
kr657 '93
all 90th anv harley boxes
kr537a '79
kr300e '76
so 2 shelf cart
lyons 3 dr mid box
kennedy cantilever
2 or 3 plastic hand boxes

downstairs (in temp. storage)

cm 3 drawer top '70
kr 274b '85
kr274 '78
kr277 '85
kr272 '77

3 or 4 tool bags of varying sizes


one of these days, all the side boxes in storage will get put back in the garage where they belong.



forgot the 26" SO roller cab in the garage.

 

[dodge610]

It's 10° out.I'm not gonna go out and count 'em.

Akron OHio I am in Jackson twp Ohio use to live in akron in Firestone Park for 20 years been out here for 12 plus love it out here but its 10 degrees out here too but the workshop is heated when need be

 

[dodge610]

One Matco triple bay one craftsman top middle and bottom and one HF 5 drawer they are all full and im lookin at getting another what am i nuts oh wait a minute the rule is you can never have too many tools im okay then.

Up date add 2 more too my total forgot about the roller chest down stairs and the side box on the garage box.

 

[Mike14k]

I have three large Craftsman bottoms, two Craftsman tops and a Kennedy top box on the bench....

But the correct answer is "never enough" !!!

 

[poprockcrusher]

I would think there are easier ways to make money than flipping toolboxes , like playing powerball .....

 

[dodge610]

I have three large Craftsman bottoms, two Craftsman tops and a Kennedy top box on the bench....

But the correct answer is "never enough" !!!

I heard that i thought i was goin over the edge till i remembered you never have too many dad taught me well.

 

[Heavy Metal Doctor]

KRL 1022 / 1201 / 1012 setup at work. At home there's a small CM 3 drawer storage cabinet roller and a SO 26" topchest ( don't know the model, but it was a freebie with the work box purchase) on top of it in the workshop...Actually mostly empty right now.
Then there's 2 CM 2 drawer Rally box's with all my carry around tools to fix stuff at home and for friends / familly.

 

[gsport]

GS what do you consider a tool box? Does the drawer in the kitchen with tools count? How about the bag under the seat in the truck?



lg
no neat sig line

top and bottom rollaways, or your main box.. no tool bags, kitchen drawers, etc.
i can't believe how many some of you guys have, i'd never be able to fill all of them...

 

[LEVE]

Six:

• Two Craftsman Top boxes
• Two 26" Craftsman Rollers
• One middle box
• One HF Tool Cart

 

[NJHandyGuy]

alot but i am looking to consolidate BIG time off my head

1 4 drawer rallybox
1 3 drawer rally box
3 drawer kobalt box
craftsman 26" rollaway
us general roll cart
stanley (don't know what to call it box) next to rooll away in pics)
craftsman s/s/t
husky electricians bag
4 regular toolboxes 20" or less
my repsaw bag
my drill bag
and the tool box behind the seat of my truck
and tools in my truck box
craftsman top chest off my origianl box

and a couple at my mom's house in an old tool tote

 

[NJHandyGuy]

top and bottom rollaways, or your main box.. no tool bags, kitchen drawers, etc.
i can't believe how many some of you guys have, i'd never be able to fill all of them...

theres a reason i am trying to downsize i filled them but tripping over them *****

 

[bobemmerich]

In the garage I've got 1 CMan bottom/middle/top an older CMan 3 drawer toolbox with just Metric stuff in it and a CMan 2 drawer project center with a plastic top that I keep my air tools/impact sockets in-I use the bulk storage area in the bottom for my wire feed welder .
In the house I've got a Cman 5 drawer bottom for stuff I can't fit in the garage, a CMan plastic rolling 2 drawer tool cart for my electrical stuff, a rolling Stanley "box" for my household tools and a few smaller boxes for other stuff(plumbing,painting,etc...)
The answer is 5 plus a few storage "bags" for breakdown of smaller projects I may have to do.
Oh, I forgot my wife has a small tool box with HER tools in that I'm not allowed to use

 

[rsanter]

36'' snap on top/bottom is my primary box
50'' MAC bottom is for the specialty tools
there is a mid chest on the MAC box that hold drill bits and taps
there is a mid chest on that that holds pullers and bolt outs

40'' craftsman with mid chest to hold measuring instruments
41'' HF to hold mill and lathe tooling
26'' Cman to hold sanding and grinding supplies. also acts as base for belt/disc sander

have a 36'' Cman proset at dads so I have tools to work with there

also have an older Cman at the shop so I have tools to do stuff there

also have a snap on box at work so I have tools there (but they own that box)

bob

 

[hifi_hokie]

Just one Kobalt roller/top combo, for right now.

 

[mkdive]

I have a 4-5 smaller boxes like the one below, but I don't think those count.

So here are the larger ones I have. If I had more space I would have more boxes (like most on the board).

CL free box I picked up:

And the "newest" addition.....and the coolest IMO:

The boxes are scaterd around the garage...I wish I could line them up and have them together...but with my shelves and the fact we park a car in the garage, the boxes are where space allows now.

I have a service cart....nothing special so no pictures of it.

 

[NJHandyGuy]

what is that stanley box any more pics of it???

 

[mkdive]

I forgot about that one, I dont have any pictures just of it....I will take/post some when I get home.