Impossible nails size

[Pipe Wrench]

Looking for stainless steel or brass nails with half-round (preferred) or flat head:

Head diameter: 2mm or a bit larger
Shaft diameter: 0.6 - 0.8mm
Shaft length: >5.0mm (not critical)

It actually doesn't need to be a nail or brad. A headpin, as used in jewelry making would also work.

I have searched everywhere and found nothing suitable.

 

[doublearon98]

A thumb tack may work. The dimension on the shaft is the description of a needle. What are you trying to do, because that could help in finding what you need?

Sent from my SM-G930V using Tapatalk

 

[Danglerb]

How many you need might narrow down the options too.

 

[rooster4321]

You might try Hobby Lobby or Michaels or Jo-Ann's, Hobbycraft stores

Sent from my KYOCERA-E6560 using Tapatalk

 

[Pipe Wrench]

I have tried all local hobby and arts and crafts shops. The closest I can find are earring post studs with a 2.5mm pad/head, but the shaft is too thick.

The nails/brads/studs are to be inserted into 2mm OD/0.8mm ID tubing with the heads making axle ends to keep wheels from falling off.

ssdave, the earposts that you linked appear to have heads around 1.5mm in diameter.

I would need a couple hundred.

 

[epmills]

https://www.etsy.com/listing/110031...pNx6Ujz2IWFLIvSXooH5qx-Q_cWpOqRMaAhD6EALw_wcB

21 Gauge specs are very close, 1.9 head diameter.

 

[epmills]

Or here, 2mm head copper
https://www.etsy.com/listing/85493727/100-solid-copper-stunning-flat-head-pins?ref=related-4&frs=1

 

[Pipe Wrench]

Thanks for all the suggestions. I found a vendor who sells brass nails with 0.9mm diameter and with a 2.1mm head.