Iphone/Cell phone Mount
- Thread starter djscotty
- Start date
I have this for my car- http://amzn.com/B00I608BJ8. It holds great in a moving car, should be perfect for your use.
After seeing your post, I'll likely get another to use on my workbench as well
After seeing your post, I'll likely get another to use on my workbench as well
I just got this same mount for in my truck, and like it a lot.
I stuck this universal adhesive backed phone clip to my phone. Then dropped the phone in a zip lock to keep it clean dry dust free. Last i stick the phone clip to magnets (.99 cents for a 2pack) from HF as needed. The magnets are hot glued or wrapped in thin tape (to keep them from scratching cars paint) at various stations around the garage.
The only one that I can find that looks like it will work is this.
http://www.amazon.com/dp/B004Z88WSK/?tag=atomicindus08-20
Trying to find a simple aluminum one
http://www.amazon.com/dp/B004Z88WSK/?tag=atomicindus08-20
Trying to find a simple aluminum one
Jerm188
Active member
I run a line from my receiver to play music through my phone. So I basically cut the top off a listerine bottle and cut the front a little lower then the back and connected it to the ouside of the metal box where my receiver is located with a small screw/washer/nut.
Lippyp
Well-known member
Mine just gets chucked on the bench, usually on top of the anvil pad on the vice unless I'm using it. It's an Iphone in a Griffin survivor case so muck isn't an issue and it won't fit in any normal mounts as a result. The case did come with a clip that also doubles as a stand but I rarely use it.
nuklbstr83
Well-known member
http://www.amazon.com/dp/B003CEXPSA/?tag=atomicindus08-20
altghough i am getting a new phone in feb and think i'm going to try something new. the velcro allows me to mount in my car, truck, toolbox, or anywhere else for cheap.
altghough i am getting a new phone in feb and think i'm going to try something new. the velcro allows me to mount in my car, truck, toolbox, or anywhere else for cheap.
Good luck with that, I have tried that with mounting other stuff and in hot weather the adhesive melted. It dripped down the dash and redried, huge pita to clean up.
nuklbstr83
Well-known member
i've been using the velcro for 7 years. even used it on my last deployment in '08 seeing temps of 115+. maybe you had a bad batch of adhesive>?
Yeah that might be the case I cant really be sure what when wrong with it. The day it melted was pretty hot and the car had dark paint. There were a few times owning that car (not the same day) aluminum cans full of coke blow up, so whatever temperature that happens at would be my guess.
Boost Creep
Well-known member
ram x-mounts in the car and shop
toplessHO
Well-known member
whats an I phone thingy? I use a plastic cup with magnet attached so I can put my cordless phone and cell phone in it and attach to tool box.
Sureshot
ALLIANCE MEMBER
http://www.menards.com/main/tools-hardware/automotive/accessories/iphone-phone-holder/p-1670002.htm
I use one of these. I mounted it upside down so you can pull it out with the charging cord attached. The spring holds it in place.
I use one of these. I mounted it upside down so you can pull it out with the charging cord attached. The spring holds it in place.
Thanks I am on the West Coast, shipping kills but I will try to find this. Looks like what I am looking for.
Onefastgsx
Well-known member
I put mine in a clean welding glove on top of my tool box. I usually have it linked to my Bluetooth stereo so I don't miss any calls or messages.
RivennHewn
Well-known member
I just bought one of these. Will post review later.
http://www.amazon.com/dp/B00BAQKRHY/?tag=atomicindus08-20
http://www.amazon.com/dp/B00BAQKRHY/?tag=atomicindus08-20
If it is anything like thier pocket clip it should very good. I figured the tape on the clip I bought would have come off in a couple days of use. Its been rock solid though.
Sureshot
ALLIANCE MEMBER
I ran a screw through the body to hold it in place.
AMCguy
Well-known member
I have an Otter Box, Defender case for my iPhone. It comes with a beefy plastic holder that will clip to my belt or the side of my tool box just like a measuring tape.