Larger screwdrivers, but shorter overall length?

[tweedlestan]

All this talk about screwdrivers actually made me remember something. Usually when I need a No. 3 or 4 Phillips or larger slotted screwdriver, I don't need an excessively long one.

Is there any source for shorter versions of larger size screwdrivers? I am aware of that one Snap on used to make, and I have one of the short Husky ones. Are there any others? I wish I could find a short No. 3 Phillips.

 

[jeffmoss26]

How short we talking?

 

[Brownsfan]

Have you tried the search function? Sorry I had to.

 

[tweedlestan]

How short we talking?

I just grabbed my Mac 3/8 slotted driver which is the largest I use, and it's nearly 14'' long. Somewhere around 8" would be perfect.

Have you tried the search function? Sorry I had to.

Actually, I did.

 

[jeffmoss26]

I've got a Craftsman 5/16 slotted that's only 6" total.

 

[tweedlestan]

I've got a Craftsman 5/16 slotted that's only 6" total.

I have the Husky version of that and use it all the time. If I could find the same basic thing in 3/8 and No. 3, I'd be a very happy person.

 

[Vvmvbb]

I've got a Craftsman 5/16 slotted that's only 6" total.

Yeah, good tool. Full size handle, short blade. I grab that one a lot for some reason.

Link

 

[Steevo]

Yeah, good tool. Full size handle, short blade. I grab that one a lot for some reason.

Link

I use mine a lot, too.
Very handy size.

 

[WildwoodChuck]

Masterforce has some like that if you are near a menards and COO is a deciding factor.

 

[nelstomlinson]

I really like a stubby blade in a full size handle. They are hard to find.

 

[bob from indiana]

Pratt Reed makes some 1 1/2" with full size handles I saw a 1/4" straight blade one at Rural King.

 

[iroc409]

How about a stubby full size P3?

 

[White 99]

A friend had one which I think was a 3/8 short with a full size craftsman handle. Best screwdriver for Dzus fasteners I have used. Would not slip out and scratch paint on aircraft. I think it was pretty old and I have never seen another one.

 

[tweedlestan]

A friend had one which I think was a 3/8 short with a full size craftsman handle. Best screwdriver for Dzus fasteners I have used. Would not slip out and scratch paint on aircraft. I think it was pretty old and I have never seen another one.

That's what I'm talking about! I can't find anything like it though, so I may have to make one.

 

[humber2]

All this talk about screwdrivers actually made me remember something. Usually when I need a No. 3 or 4 Phillips or larger slotted screwdriver, I don't need an excessively long one.

Is there any source for shorter versions of larger size screwdrivers? I am aware of that one Snap on used to make, and I have one of the short Husky ones. Are there any others? I wish I could find a short No. 3 Phillips.

Have you considered using socket drivers?

 

[tweedlestan]

Have you considered using socket drivers?

I have actually. They work beautifully for Phillips, usually. Slotted drivers are harder to find, and I do prefer to have less "wobble" when trying to loosen a really tight slotted screw.

 

[theoldwizard1]

Yeah, good tool. Full size handle, short blade. I grab that one a lot for some reason.

Link

OH NO !! A Craftsman screwdriver I DON"T OWN !!!!!

 

[whyNick?]

I use mine a lot, too.
Very handy size.

x3. Mine is the goofy orange that they sold back in the 90s though. I use it every time I need a large flat driver for something other than prying.

Anybody know if Craftsman made Phillips drivers like this?

 

[gungatim]

I have that craftsman shorty too, it is sooo handy, I may just take one of my extra phillips #3's and cut it down and re-mount it so I have a match. Never seen the phillips version for sale and not sure where I picked up the flat one but you could probably make your own too if you can't find one...

 

[bluebolt]

Lets get Enderes to make a fullsize handle 2 in 1 with a reversible short P2/P3!

 

[jeffmoss26]

x3. Mine is the goofy orange that they sold back in the 90s though. I use it every time I need a large flat driver for something other than prying.

Anybody know if Craftsman made Phillips drivers like this?

Got a picture? I love the orange handle drivers!

 

[cheechi]

I'd like to see someone make a full set of these P0-3 & a few flats. For the most part though, a ratchet & bit driver will easily fit the length clearance and all but a few times fit the swing clearance where I can think these would be really necessary.

But I still want a set.

 

[Vvmvbb]

---old thread, thought I'd maintain it by adding a reference to these Pratt-Reeds

 

[4xdog]

I like this idea. I use the Craftsman big handle/short stank often and I've wished for other sizes, especially Phillips or JIS.

I use my old Four-in-One screwdrivers often just 'cause they're short for the handle size.

 

[NoahG]

As for a shorter #3 phillips, if you get from CK23 reversible kit from Xcelite, the RB3 blade has shafts around 3".

In addition, Wilde makes a 3/8"x5" #S 46/CS square shaft slotted, its awesome.

Felo makes a 1/2"x8" #0715732362, which I need to order myself.

But I sure would love a stubby PH3, 3/8" and 1/2" with full size handles. Heck, even a 1/2"x4" or PH3x4" would be sweet. Who can do this for us? Enderes? Grace?

Just found this bit kit:
http://www.amazon.com/dp/B000E85SB4/?tag=atomicindus08-20

 

[fivespdcat]

I've been eying these:
http://www.amazon.com/dp/B007PBB9GQ/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=34G8LYSTJ6D7U&coliid=I1W3DUQUAOHNUI

I also really like those Pratt and Reeds. The handles are nice, they seem to be the same as the mastercrafts. Great drivers especially considering the price.

One other option is to use a ratcheting driver handle with the short shank and any bit you like...

 

[NoahG]

I've been eying these:
http://www.amazon.com/dp/B007PBB9GQ/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=34G8LYSTJ6D7U&coliid=I1W3DUQUAOHNUI

I also really like those Pratt and Reeds. The handles are nice, they seem to be the same as the mastercrafts. Great drivers especially considering the price.

One other option is to use a ratcheting driver handle with the short shank and any bit you like...

I've got the Armstrong version of the 1/4" from HJE. Its great.
http://store.harryepstein.com/cp/WesternForge/66-440.html

 

[metaldad]

I've been eying these:
http://www.amazon.com/dp/B007PBB9GQ/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=34G8LYSTJ6D7U&coliid=I1W3DUQUAOHNUI

I also really like those Pratt and Reeds. The handles are nice, they seem to be the same as the mastercrafts. Great drivers especially considering the price.

..

mastercraft drivers are made by pratt reed

 

[metaldad]

I've got the Armstrong version of the 1/4" from HJE. Its great.
http://store.harryepstein.com/cp/WesternForge/66-440.html

i have several of that style.
love the handle

 

[Nick Danger]

If I need a short screwdriver with a big tip, I'll use an impact screwdriver.

http://www.sears.com/craftsman-impact-driver/p-00947641000P

 

[bas157]

Wera stubby #3
http://www.kctoolco.com/Wera-Stubby-PH-3-x-25mm-Phillips-Screwdriver-p/wr008782.htm