Let's See Your Recent eBay Purchases!

[jrodc455]

bwhahaha....I was mad as hell because I worked a 30 hour shift Friday and I didnt get a chance to bit on that 1/2 big dawg!

Hope ya like it...dont bid against me on the next one on ebay though please

I won't haha. I'm tapped out for a while.

 

[ramtuff]

I don't do much with 1/2" drive these days, but I couldn't pass this up...Snap-on SL710 for $22 + shipping.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=370486921629&viewitem=&sspagename=STRK%3AMEWNX%3AIT

 

[north]

Nice score ramtuff. They tend to be a tad more when sellers ship internationally.

Got myself one of those Wiha magic things. $5.69 + $5.

 

[wornoutoldman]

Nice score ramtuff. They tend to be a tad more when sellers ship internationally.

Got myself one of those Wiha magic things. $5.69 + $5.

This is one of those tools you wonder how you ever lived without.

 

[Moose-LandTran]

Oh, one or two new additions..

Very exciting, a giant 250ml bottle of Loctite 243:

Just as exciting, 3 taps for 25L fluid containers:

5-Litre oil jug:

Pressol funnel:

Draper Flywheel locking tool:

Another Draper flywheel locking tool:

Set of cheap pickle forks, not great but they'll do:

Sealey hub clamp spreader, for removing struts from hubs with pinch bolts:

Stahlwille 3/8" hex drivers, 5/6/8mm for a friend:

NWS side cutters, for a friend:

Stahlwille 1/4" 3mm hex driver for me:

Hazet 7mm hex key with handle, for holding shock pistons while undoing the retaining nuts:

Hazet exhaust rubber puller:

Mayhew 9" rolling head prybar:

Snap-on angled prybar:

Snap-on deep 11mm impact socket, for aftermarket headbolts on VM-System diesel engines:

Esgen swivel-tip Clic-R hose clamp pliers:

Kal 16" straight and bent needle nose pliers:

USB 2.0 OBDII/CAN-BUS cable:

Launch C Reader V, should be ok for small home diag stuff:

And finally..

My Gedore score, 3 soft-face hammer, new, made in Germany for £11.20!

 

[jrodc455]

bwhahaha....I was mad as hell because I worked a 30 hour shift Friday and I didnt get a chance to bit on that 1/2 big dawg!

Hope ya like it...dont bid against me on the next one on ebay though please

You should be glad you didn't bid on it...mailman brought it today...all it was was an empty envelope with a hole where the ratchet fell out of.

 

[shanker]

you should be glad you didn't bid on it...mailman brought it today...all it was was an empty envelope with a hole where the ratchet fell out of.

ouch!

 

[rabidsquirrel]

KD 3/4 breaker.

$14 and change shipped, brand new.

 

[chewy7]

some high quality s-k bits on sae and metric. made in the usa. Bits are made s2 steel. I also have some harbor freight hex sockets as backup
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190354943259&viewitem=&sspagename=STRK%3AMEWNX%3AIT
and these http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=290540050921&ssPageName=STRK:MEWNX:IT

 

[rt dak]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=140516416718&viewitem=&sspagename=STRK%3AMEWNX%3AIT

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110656557498&viewitem=&sspagename=STRK%3AMEWNX%3AIT

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=230592033220&viewitem=&sspagename=STRK%3AMEWNX%3AIT

Not eBay but I snagged this set off Amazon brand new for $25. Didn't really need it but I couldn't resist.

 

[Coolabah]

I've been keeping my eye out for an original Petersen Vice Grip with knife (Schrade) .... seriously looking ( but on and off for when I had the cash) for well over 5 years

Finally found one on local ebay, but I had like NO money left in my "spend" account... I'm like 2 years overspent on my hobby (not work) tool budget as it is... WTF I put a bid in, auction maxed out 2 CENTS under my maximum bid...

... obviously meant to be..

...oh, and did I mention that for the life of me I can't see a single sign of ANY use whatsoever on the tool itself , the leather pouch is a bit scratched up but I KNOW I can restore that to "as new"....

 

[canuckian]

past couple months' haul

t-handle stubby and hard handled mini ratcheting screwdrivers - finally have all the orange hard handled ratcheting screwdrivers!
mini pick/screwdriver set
hex keys
pocket screwdriver and some kind of de-burring tool (seller threw it in)

5 piece SO screwdriver set
5 piece SO retaining ring pliers
SO dead blow
SO 1/4 metric crowsfeet

SO PL300CFO plier set
5/16 bit ratchet w/magnetic extension

 

[jrodc455]

http://cgi.ebay.com/ebaymotors/ws/e...0583593371&viewitem=&sspagename=STRK:MEWNX:IT

Bought my first ever Snap On tool...

 

[muskaman67]

http://cgi.ebay.com/ws/eBayISAPI.dl...item=&sspagename=STRK:MEWNX:IT#ht_4587wt_1141

just won this cornwell 36" prybar for about half off. pretty much brand new.

 

[ARAMP1]

Been on a tool buying kick lately. Here are some recent purchases.

New long handle screwdrivers. Not a deal at $300 shipped, but I've been wanting them for a long time.

Some new mini screwdrivers and picks.

Kind of a what the hell purchase to match the other orange handled stuff...Like new 3/8 inch ratchet. The seller said it was a miss-stamp because there is no circle around the Snap-On logo and no "On-Off". I didn't really care about that. I was just looking for an orange handled ratchet.

Found a new quarter inch to match the bigger one.

Found a new 3/8 ratchet and breaker bar. $100 shipped.

 

[StevenB]

Just won this 1/4" proto setup. Finished my proto ratchet collection, not doing a 3/4" collection yet.

 

[Sick Puppy]

Just won this 1/4" proto setup. Finished my proto ratchet collection, not doing a 3/4" collection yet.

It always amazes me how much Koken stuff resembles the old Proto stuff...

 

[Toolhorder]

I just got this one,

 

[north]

Just won this 1/4" proto setup. *snip*

So that was you. I wanted in on that one but $29.25 on shipping held me back. Well, good for you then.

 

[SMKS]

I just got this one,

Whoa!

Very cool, but that will be an expensive board to fill.

 

[aussiek2000]

Not my most recent purchase, but my most recent delivery. I'd love to buy snap on, but I bought 2 aircats for the price of one Snap-On at student price.

 

[Toolhorder]

Whoa!

Very cool, but that will be an expensive board to fill.

I got half of them for sure. Most of the clutch head ones too. Problem is finding period correct drivers. I'm going to clean them and then secure them so that can't be removed and put them in my man cave or sell it to a TGI Fridays for a wall decor

 

[StevenB]

So that was you. I wanted in on that one but $29.25 on shipping held me back. Well, good for you then.

shipping was only $5.20 for me.
I've lost out on 1/4" proto ratchets that gone for $12-$20 before, so in my humble opinion I got a pretty good deal.
Some of those sockets I needed anyways.

 

[fxt]

grabbed these for $25 shipped (snapon sae line wrenches)

 

[Strouty]

grabbed these for $25 shipped (snapon sae line wrenches)

You ****! I paid more than that for my KD ones.

 

[fxt]

You ****! I paid more than that for my KD ones.

oh my first i ****.


it also helped they went off at 1am est while i was at work

 

[camarotoolman]

check out camarotoolman on evilbay, I got some good stuff up now. Evilbay, I love it!

 

[thesilverone]

nice self promotion

 

[hotrozz]

Here's my latest purchase. I though it was a steal, $69 delivered for a Armstrong 3/8 torque wrench-are you kidding?
Anyway, I've used it a few times at work and love it!

http://cgi.ebay.com/ws/eBayISAPI.dl...jGQwPGk%3D&viewitem=&sspagename=STRK:MEWNX:IT

 

[canuckian]

latest deliveries.....

SL80, FL80 and TL72 - all brand spankin new!!

SO T-handled ratcheting screwdriver, SO SDM400A bit set and Mac magnetic bit holder full of USA made bits.

 

[JayL]

Won my first Dual 80 ratchet in ebay today.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220755652958&ssPageName=STRK:MEWAX:IT

 

[route246]

Nice.

Won my first Dual 80 ratchet in ebay today.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220755652958&ssPageName=STRK:MEWAX:IT

 

[canuckian]

Won my first Dual 80 ratchet in ebay today.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220755652958&ssPageName=STRK:MEWAX:IT

nice win! bet it won't be the last dual 80 you buy!!

 

[north]

Won my first Dual 80 ratchet in ebay today.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220755652958&ssPageName=STRK:MEWAX:IT

You did good. Did you convince the seller to ship internationally anyway?

 

[G U E C O]

http://cgi.ebay.com/ebaymotors/ws/e...285650&ssPageName=STRK:MEWNX:IT#ht_500wt_1182

 

[north]

New SK spark plug sockets 3/8" drive.
- 5/8", $7.
- 3/4", $9.25.
- 13/16", $7.
+ $13.95 shipping for the trio.

 

[JayL]

You did good. Did you convince the seller to ship internationally anyway?

I have a shipping address in Tinley Park Illinois. Seller won't ship international.

 

[JayL]

nice win! bet it won't be the last dual 80 you buy!!

You're right. None the less I knew what was coming before I took this first hit. Planning on getting an SL80 if I find a good deal then probably move on to some of the 3/8 stuff.

You're recent ratchets purchase inspires me. LOL

How much did you shell out for the SL80?

 

[Zrexxer]

I posted it in another thread too, but it was an unusual enough item I'll list it here too... Snap On FH936A, with a soft-grip shaped orange hard handle. One of only two I've seen, the other belongs to another GJ member.

 

[sporty_drew]

Just got these. They were $17.88 Shipped after using my eBay bucks.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120706585849