Let's See Your Recent eBay Purchases!

[Moose-LandTran]

Thats quite a journey Moose hope its worth the money.

I hope so too!

My sister lives in Leeds, so we're going to see her too. The journey won't be too bad, we're taking my dad's car and my mum's driving, so we'll probably be doing 90 up the M1 all the way! If you're on the M1 and a black MK. IV Golf tears past, good chance it'll be us!

We're going to Southend on Sunday for the other one!

 

[Brookesy]

lol I doubt it mate i'll be in the garage all day wiring my beast.

 

[nolatoolguy]

I dont have any pictures but we buy alot of tractor parts off ebay.

 

[Moose-LandTran]

lol I doubt it mate i'll be in the garage all day wiring my beast.

Wiring or re-wiring? It is a Fix Or Repair Daily..

I dont have any pictures but we buy alot of tractor parts off ebay.

I think you're looking for the Let's Not See Your Recent eBay Purchases thread..

 

[jeepnut24]

I picked up my 5.3L vortec today!!!!! Finally progress on the project I have been picking up tools for....

 

[jerryW]

Just hit this one today

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250607526314&ssPageName=STRK:MEWNX:IT

And not too bad of a price.


jerry

 

[Moose-LandTran]

Picked up my new box today. Oh yeah...

 

[lukiep]

very nice KRL

 

[Diesel_Crawler]

Picked up my new box today. Oh yeah...

So is that the new stay at home box so you do not have to lug your other one home every night?

 

[ID_BOY]

Matco 29pc driver set

Snap-On 12 Piece Metric Shallow 6 Point Socket Set 8mm-19mm

Snap-On 11 Piece SAE Shallow 12 Point Socket Set 1/4"-7/8"

Matco 14 Piece Metric Deep 6 Point Socket Set 6mm-19mm

Snap On Deep 6 Point 1/4"-15/16" & Blackhawck Shallow Socket 3/8"-13/16" 3/8 Drive

 

[quattrojon]

Picked up my new box today. Oh yeah...

It looks nice mate, you've done well with that.

 

[Moose-LandTran]

very nice KRL

Thank You.

So is that the new stay at home box so you do not have to lug your other one home every night?

They're both stay-at-home boxes now. Working from home these days, will be buying/fixing/selling cars from now on, so they'll only move when i find a shop to rent.

It looks nice mate, you've done well with that.

Thanks, Jon. I had a look at the back of the top box, it's a KR-637. I forgot to check the number on the bottom/middle. Gave it a quick clean up, it's in pretty good nick. Slides need to come out and get soaked in brake cleaner then regreased, but otherwise good.

 

[arkangel06]

ID Boy nice haul

Moose I dig that kra.

 

[ID_BOY]

just scored less than 1/2 price of new in like new condition!!!!!!!!

 

[Titus]

Got my ebay Snap On Shop clock in the mail today... already on the wall!

 

[Moose-LandTran]

Replacement Snap-on badge for the new KRA locker:

Camshaft locking/alignment plate for VW VR6/V5 engines. My dad's car has a dead tappet that needs replacing, need this to lock the cams.

Snap-on 1/4"-drive 1/4" hex bit holder:

Another Snap-on 1/4"-drive 1/4" hex bit holder:

Bought two by mistake..

Snap-on 3/4"-drive deep 1-1/16" socket:

 

[walrus]

Picked up my new box today. Oh yeah...

That matches my roller, bring it over here so I can have it

 

[Moose-LandTran]

That matches my roller, bring it over here so I can have it

Ha! You wish. I've been waiting for one for a couple years. And now i have one!

 

[walrus]

Ha! You wish. I've been waiting for one for a couple years. And now i have one!

You ****,
I bought a Montezuma to sit on mine but I'm still looking for one that matches my roller. I bolted the Montezuma on mine, it took like 2 secs to drill the Montezuma and about 30 secs to drill the Snap ON box. I couldn't believe the difference.

 

[Moose-LandTran]

You ****,
I bought a Montezuma to sit on mine but I'm still looking for one that matches my roller. I bolted the Montezuma on mine, it took like 2 secs to drill the Montezuma and about 30 secs to drill the Snap ON box. I couldn't believe the difference.

My first You ****!

I think the shipping from London to Maine would be a little too expensive. Plus the cost of the box.

I drilled my KRA when i bolted it all together and relocated the handle, that was pretty tough sheet metal tool. I need to drill another 8-10 holes to attach the new side locker. Haven't drilled the KR yet, that'll get 8 holes in the bottom to attach the two parts. Lucky i have German Dewalt bits and a Swiss Bosch drill at hand.

 

[Monte]

I was looking at a set of those on eBay.de, 23€. I'd buy them, but the seller wants something like 16€ to ship, so it's not worth it. Otherwise i'd buy them. Maybe i'll buy a few things from them, combined shipping.

you might also like this one...matches your wrenches...

 

[Hiball]

Some Snappy goodies ive picked up recently... Btw you guys need to pick up the pace a bit, I had to dig 5 pages to find this thread... You should be ashamed of yourselves.

 

[Moose-LandTran]

Btw you guys need to pick up the pace a bit, I had to dig 5 pages to find this thread... You should be ashamed of yourselves.

I posted 2 days ago!

Snap-on 1/4" and 3/8" long Torx drivers:

Just need a long T50 now.

 

[wreckercologist]

Some Snappy goodies ive picked up recently... Btw you guys need to pick up the pace a bit, I had to dig 5 pages to find this thread... You should be ashamed of yourselves.

Nice stuff, Hiball. BTW, I've been avoiding Ebay lately........I'm broke because I've been buying new junk off the Snap-on truck instead of old junk off of Ebay.

Snap-on 1/4" and 3/8" long Torx drivers:

Just need a long T50 now.

Those are ****!

 

[Hiball]

Nice stuff, Hiball. BTW, I've been avoiding Ebay lately........I'm broke because I've been buying new junk off the Snap-on truck instead of old junk off of Ebay.



Those are ****!

I can see how purchasing off the truck could do that to a man. I scored those 4 rats for $107 shipped, including that 17" 1/2 drive flex head which im sure retails for more than $100 bucks.

 

[wreckercologist]

I can see how purchasing off the truck could do that to a man. I scored those 4 rats for $107 shipped, including that 17" 1/2 drive flex head which im sure retails for more than $100 bucks.

Nice!

I bought a TL72, a FCF72, and a SHBB24 breaker bar today for $195.00 I'm a sucker for good deals!

 

[Hank McMauser]

picked up this nice proto 3/8 5249 ratchet the other day it just arrived this evening. Small peanuts compared to others purchases,but I'm tickled

 

[MacMan]

Ebay is evil, but oh so satisfying to browse while swilling the morning coffee.

This found me a week ago.

I had always wanted a drill press and I have a bike lift that I'm building that calls for one. It's a 12 speed belt driven 1/2HP Peerless unit made in 1975. There's no country of origin that I can find, so I'd be interested if anyone on here knows more.

It came with a crude workbench frame (huge, I think it used to be a fuel tank tower, see in BG), an 8 drawer Stanley toolbox, a small Taiwanese bench grinder, a Chinese bench linisher/sander and another large truck toolbox that will be turned into a little safe for my powertools. I've always been nervous about leaving an angle grinder in the same space as other things with padlocks on them so it is stored away from all discs and disc fittings. Once I modify the bench frame I'll weld it in so that all handy tools are not there for opportunists.

The real gem was the drill press though. It has had two repairs made to it. The work table housing has been welded at the back of the gear drive and the main spindle for the lowering lever has been brazed. It must have fallen over at some stage - but it was an ex-shire unit that probably went through an auction house or two in its time. The bearings are all good, and the main thing is that the plunge mechanism is solid and sound.

I spent 2 hours de-lousing it, cleaning things up with 800 grit paper, steel wool and kerosene and doing some minor panel beating.

 

[Moose-LandTran]

Those are ****!

Thanks.

I got them for $160, which i think is pretty good, considering they're all pretty much new. Much cheaper than i could ever get them here. Just need a T50 to complete the set. The long T20/25/30 will be good for VWs.

Now, before Hiball complains..

New yellow Snap-on T25 Torx driver:

Snap-on S6018 long 10mm hex driver for headbolts:

 

[Goinlow]

http://cgi.ebay.com/ebaymotors/ws/e...witem=&sspagename=STRK:MEWNX:IT#ht_2197wt_948

I just had to post these up. Got a set of snappy metric stubby or midget wrenches for $74 shipped. List is like $248.

I was very excited.

 

[Hiball]

You guys are slipping again, I had to dig to find this thread. I picked up this NOS Wright 1/4 Drive socket set and a Snappy 3/8 flex.

 

[maxipouce]

Here is my contribution to this english post with an ebayuk item;
facom closing circlip pliers for men, it covers diameters from 85 to 200mm and made it to France in the record time of 5 days !!!
The opening equivalent has also been purchased in the U.K. but one day before the igloglgou eruption so I do not expect it to arrive before next month....

 

[blaze_125]

I've been wanting an auto-dark helmet for a while now, so I eBay(ed) myself the following hood. According to the add, it complies with the latest and greatest certifications so I bought.

 

[paul_f]

I got a brand new pair of wheel dollies for less than half the shop price, a brand new set of 1/4 snap on extensions, T72 and TL72 snap on 1/4 ratchets (both from the same US seller), and a set of Gedore circlip pliers

 

[t100]

I've been wanting an auto-dark helmet for a while now, so I eBay(ed) myself the following hood. According to the add, it complies with the latest and greatest certifications so I bought.

HTP sells it, supposedly pretty good.

http://htp.stores.yahoo.net/striker-cf-helmet.html

 

[blaze_125]

HTP sells it, supposedly pretty good.

http://htp.stores.yahoo.net/striker-cf-helmet.html

Wow, thanks for the link. I feel even better about my purchase now. I actually paid a few less dollars including shipping and a pair of welding gloves

For anyone who might be interested... this is the auction:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280492293813&ssPageName=STRK:MEWNX:IT

 

[Hiball]

Wow.. 10 pages deep to get to this thread.. Todays little ebay snaggage TK860 Brand new BIN $30 shipped

 

[Hiball]

I guess ill have to resurect the thread again... I Picked up this Wright 3/8 and 1/2 SAE Hex set for $20 shipped, WOOT...

 

[DewittMotorsports]

Got both of these for $19 shipped, both where NIB and 12"

 

[fxt]

Actron Pro Compression Tester CP7828

atlas wb32 tire balancer