Let's see your toolbox.

[Outlawmws]

SNIP
hammers! this is for you Outlawms

Wait, only one drawer?

 

[jeffmoss26]

Yep Jim! Got my first pair of 420s as a lad! My uncle was a plumber so I caught on to
Channellock quickly. The majority of the others are from the last year or 2.
Outlaw, I have two other drawers in the box but they are full of parts haha. Notice the three new Vaughan hammers?

 

[gearheadsynts74]

this is one of our first wraps on an awesome 72"extreme tool box

 

[98TJ]

Finished my hutch last night.

http://sphotos.**.fbcdn.net/hphotos-snc7/430997_1989649878189_1751610005_956874_880420929_n.jpg

 

[Bears Fan]

Bassbone52

Who makes these racks you have to hold your pliers? pretty cool never seen these before!

 

[jeffmoss26]

Plyworx is the company. Bought mine on Amazon, 20 bucks or so.

 

[odelay01]

Here's mine.

[/IMG]

[/IMG]

 

[tonym]

Here is my new setup at work...

 

[Deadhead]

After lusting after some of the boxes on this thread I finally put a camera in my hand today while I cleaned up the roadbox a bit and shot these.

Transport mode

By deadhead622 at 2012-03-18

Open view

By deadhead622 at 2012-03-18

Sockets, magnetic bowls, multimeter, misc containers

By deadhead622 at 2012-03-18

Top drawer Wrenches

By deadhead622 at 2012-03-18

Middle Drawer Screwdrivers, pliers, files, punches, etc. etc. etc.

By deadhead622 at 2012-03-18

Bottom Drawer Hammers, prybars, hardware, aerosol and 12v tools

By deadhead622 at 2012-03-18

Plus other stuff behind the rear seat and under it. Already wanting (needing)to build a bigger one.

 

[copter]

Newbie here.....

Looking for top ideas.. Saw a couple hundred pages back where someone used what looked like Corian and we've all seen the SS and BB tops but what else works?? Its going on a 41" Craftsman with a 8" wide six drawer mini cab.

 

[Outlawmws]

Newbie here.....

Looking for top ideas.. Saw a couple hundred pages back where someone used what looked like Corian and we've all seen the SS and BB tops but what else works?? Its going on a 41" Craftsman with a 8" wide six drawer mini cab.

Somewhat depends on what you do/what you want out of it:

besides the SS Butcher block, and Corian you mentioned: Plywood, Hardwood faced ply, Hardboard/masonite, Formica, Aluminum plate, Steel Plate, conveyor belting, rubber walkway mats, Yoga mats, I'll bet Granite or marble would be cool in the right environment, I've seen carpeting used...

 

[bts]

nice Sidchrome ratchets

The 1/2 & 3/8 are Sidchcome the 1/4 is Kincrome.
I do have a fair bit of Sidchrome stuff but now I only buy the pre 90`s tools. Since they were taken over by the Stanley group in 1990 or 91 its been a downhill slide for them.

mismatched boxes
mismatched set of everything
looks like they've all been used.




nice to see that someone actually uses their tools.

Yep, never been one for colour co-ordinating.
and they do get used.

I love that Toledo adjustable wrench since that is where I went to college!

Seeing as you like Toledo so much.

I have some pliers of their`s as well.

Tony

 

[Scuderia-F1]

Finished my hutch last night.

That one came out nice!

 

[jeffmoss26]

That roadbox is awesome!!

 

[jeffmoss26]

bts, thanks for sharing! Never knew that was a tool brand.

 

[chucky313]

Heres my new box

 

[JASTECH]

Nice box's everybody, truck box needs a you tube video on making and setup.

 

[8paintchips]

Thought I'd throw mine into the mix

 

[Super Sport]

Finished my hutch last night.

http://sphotos.**.fbcdn.net/hphotos-snc7/430997_1989649878189_1751610005_956874_880420929_n.jpg

I think this is the nicest/most usable looking hutch I've seen!

 

[D9H 90V]

Just got this friday, upgraded from a KRA2306 to this Classic 96 KRA2418 Im liking it so far drawer pics to come, im still trying to get it setup

 

[98TJ]

I think this is the nicest/most usable looking hutch I've seen!

Thanks, man. If you check out my garage thread, the build is in there.

 

[Prime320]

 

[battlegraduate09]

certainly jealous of some of these setups, but i just cant pull the trigger on a double bay box, my mac box holds everything i have, which is quite a bit. Of course, for different hobbies, different jobs the toolbox you choose will depend on that of course. As a diesel mechanic, i relly like the looks of a double bay and that all that space on top of the box gives you a place to work. I think ill just buy a service cart instead of another toolbox right now. Iv got more than i need

 

[jeffmoss26]

That Lista box is awesome!

 

[One9Five5]

Welcome to the forum, One9Five5, I hope you enjoy it! SWEET box, looks like you use the heck out of it!

Well used. That thing has some hard mileage on it.

 

[DRhodes]

Thought I'd throw mine into the mix

I love the PBR can. Nice boxes btw.

 

[kapster]

Prime32, is that considered a lista toolbox or a regular cabinet? Very nice

 

[nisreo]

Work is super slow, got bored, did this.

Sent from my ADR6400L using Tapatalk

 

[Prime320]

Prime32, is that considered a lista toolbox or a regular cabinet? Very nice

I am honestly not sure. I got it for 400 and it never had a tool in it. My buddy got 2. The other one has the typical lock on each drawer and was considered a tool box, and he got this to go on top of it. I am not sure if they classify this as a tool box or cabinet, but I can tell you the ONLY difference is the drawer locks. I would like to know if this is a box or cabinet if any of you guys know!!!

 

[Your Father]

Work is super slow, got bored, did this.

Sent from my ADR6400L using Tapatalk

The old school trick to cleaning up the edges after painting pressed designs-

Take a lint free cloth, and a stiff block or wooden block. Wrap the cloth around the block like you're gonna block sand something with it. Spray some laquer thinner (or whatever solvent will gently remove the paint applied), and slowly block the pressing. Don't use too much solvent, and several light blocking sessions are better than one hard one.
The good thing about this process is that, when painting, you don't have to give a **** if you paint outside of the lines.

 

[nisreo]

Good idea with the block and cloth, I used a razor blade but it could be a little cleaner

Sent from my ADR6400L using Tapatalk

 

[Holt]

I want to get listas for my kitchen cabinets. But damn that would be expensive..... But purdy.

 

[Pneuking]

Here is my collection. It took Sears about a month to get the box to me. I even called Waterloo to check on it. I'm extremely happy with it, but I need more room.

 

[Hawk321]

Damn it...forgot an ebay auction...used Lista tool box gone for 200€...with 200Kg heavy duty drawer...ARGH!!!

 

[dr.gizmo]

This is my baby at work. The top cabinets, left cabinet and the tool cart top are all custom. The tool cart top folds up and locks into a box.

 

[metalhead212121]

interesting setup dr.gizmo.... Is it safe guess to say that you made all those custom pieces??

 

[teletekman]

Been wondering this forum for quite some time and have really gotten addicted to it. This is my first of many post I hope to be part of here and here is my setup in my garage...


Sean
Madera, CA

 

[teletekman]

And here some more...


Sean
Madera, CA

 

[teletekman]

And a few more...


Sean
Madera, CA

 

[teletekman]

And the last one...


Sean
Madera, CA