Gregster
Well-known member
Last edited:
Let's see your toolbox.
- Thread starter wythors
- Start date
canuckian
Well-known member
^^^sharp looking toolbox (great color too
) also likin' that gt3 in the background. Rear bumper or not, those are some **** cars! 
) also likin' that gt3 in the background. Rear bumper or not, those are some **** cars! Gregster
Well-known member
The box get's a ton of compliments! It beats the traditional blue or red! I like a tad of color, This is my roll cart..
Eventually I'd like to get a Green KRL rollcab like the one you posted
Eventually I'd like to get a Green KRL rollcab like the one you posted
Last edited:
ianguilly
Well-known member
Gregster
Well-known member
Love the box and love the classic "neon racing" sticker on the blue box!! I had those on my racecar that I got "NOS Original Chrysler" from a source who was close to Neon Challenge racing in the mid 90s.
ianguilly
Well-known member
^^ I have a huge "neon racing" magnet on the side of my box i keep for car show.
Gregster
Well-known member
that reminds me I have a few magnets that I'll bring to work and stick on my box!
Big Johnson
Well-known member
- Joined
- May 1, 2012
- Messages
- 142
As requested...
Always adding and i even have 1 empty drawer!
Does your Snap On ever fight with the others over COO. That would be a great cartoon; instead of ToyStory(Disney) it'll be ToolStory.
As requested...
Always adding and i even have 1 empty drawer!
Who makes the heat gun?
RVDan
Well-known member
My new cabinet is on its way
I was looking to buy something for home in the $1000 range, somehow I ended up ordering something thats almost $10,000 for work instead. My current KRA series Snap On boxes that I use at work will come home, my toolbox will be more valuable than my building.
I was looking to buy something for home in the $1000 range, somehow I ended up ordering something thats almost $10,000 for work instead. My current KRA series Snap On boxes that I use at work will come home, my toolbox will be more valuable than my building.
jeffmoss26
Well-known member
Trucky, looking good! I see some machinist stuff!
jeffmoss26
Well-known member
I want a Kennedy box...even though I do not do machining, almost all of the guys at work have them
Master Appliance; also rebranded by Bosch
ianguilly
Well-known member
I'm gonna repaint the top box to match the extreme green when I get the time.
Link-Belt
Well-known member
As much as I boast about buy American I have to say that HF 42" is the best bang for the Buck.
last set of pics. I left some tools out and I have a MAXNC 15, desktop cnc mill which is fun to play with. I am not a professional mechanic or anything like that. I use these to work around the house and do my own car repairs as well as help out my friends.
Attachments
jeffmoss26
Well-known member
WOW. I think it's safe to say you have the tools to work on just about anything. Very impressive!
osborn.ozzy
Banned
Don't forget the sauna!
Well guys after 8 weeks of waiting it finally arrived today..My new KRL1033. The bottom center drawer was somewhat damaged by the shipping company. And as always just my luck. My dealer dropped by and we got it all taken care of. So here it is.
Wauuu.nice pictures.much thanks for sharing and congratulation ,awesome Box! Snap On!!!
Toolhorder
Well-known member
I worked at Dodge as a lot kid in the 90's and it was common to hear NEON "Needs engine oil now"
Oz Fry
Well-known member
Here is my box. Snap on kra 53" box
& 1 of my mate has a few snap on boxes.
This 1 is being used as a bar in his living room, it's a Travis pastrana limited box
Sorry for the bad photos, I took them on my phone.
Cheers Troy.
& 1 of my mate has a few snap on boxes.
This 1 is being used as a bar in his living room, it's a Travis pastrana limited box
Sorry for the bad photos, I took them on my phone.
Cheers Troy.
jeffmoss26
Well-known member
Wow!
I just got a new snap on box, i upgraded from a 26 inch cman top and bottom into this. Also i am 19 and i am going to school for Auto Collision Repair.
In crate
Without corner gaurds
With corner gaurds
By klg73 at 2012-06-18
Here are the drawers:
All wrenches are Cman pros-USA
This drawer is missing my welding helmet..
In crate
Without corner gaurds
With corner gaurds
By klg73 at 2012-06-18
Here are the drawers:
All wrenches are Cman pros-USA
This drawer is missing my welding helmet..
Last edited:
Just traded in my old boxs
For my new one
I should be getting my new drawers for it soon too, Im trading 4 of the smaller side drawers for 2 of the deeper drawers. I have a guy at work that is going to make me a top for it too, just don't know if I want maple or oak yet.
For my new one
I should be getting my new drawers for it soon too, Im trading 4 of the smaller side drawers for 2 of the deeper drawers. I have a guy at work that is going to make me a top for it too, just don't know if I want maple or oak yet.
I just got a new snap on box, i upgraded from a 26 inch cman top and bottom into this. Also i am 19 and i am going to school for Auto Collision Repair.
In crate
Without corner gaurds
With corner gaurds
By klg73 at 2012-06-18
Here are the drawers:
All wrenches are Cman pros-USA
This drawer is missing my welding helmet..
That's a pretty good set up for a young guy.
battlegraduate09
Well-known member
that travis pastrana editions is AWESOME. I would love to have that in a krl1022
Gorgeous, i almost dont blame him for using it as a bar
Gorgeous, i almost dont blame him for using it as a bar
Thanks!! been collecting a long time, and i am trying to take advantage of my student discounts!
ianguilly
Well-known member
^^^ You shouldn't leave your respirator out like that it will go bad quick, need more welding clamps. Off to a good start though.
I worked at Dodge as a lot kid in the 90's and it was common to hear NEON "Needs engine oil now"
Never Ending Obnoxious Noise !!! That's what we called them at the road courses.