Let's see your toolbox.

[Chadwilliam1]

I don't see a vent pipe. Tony what is that ratchet below the snap on's.

 

[Harvey Melvin Richards]

I don't see a vent pipe.

Post 8139

 

[Chadwilliam1]

whoa that is big!

 

[Inkncraig]

This is just my top draw. I couldn't get the whole draw in the shot

 

[TonyCH]

TonyCH what the hell is that huge vent pipe in your first picture? Geothermal or just a giant *** clothes dryer for all your heavy winter clothes up there at the north pole?

LOL, the place is in a cave under a shopping mall / high rise building so I guess its part of the air circulation system. You know the thing ninjas etc. crawl in movies to get stealthy access to buildings I use it to hang compressor hoses, lights and extension cords on it.

Tony what is that ratchet below the snap on's.

Cheapo chinese 1/4" sold under Biltema brand. BTW. the one with green SO handle is actually Hazet

 

[aussiek2000]

 

[cgv69]

I had the camara out yesterday so I figured I'd snap a pic of my recent CL snag... Snap-On KRA-4114\4107 combo.

 

[jrherald420]

And how much was it?

 

[cgv69]

And how much was it?

$1k even - Nothing to write home about but I think it was pretty good considering full retail is about $3.7k

 

[Jawn]

$1k even - Nothing to write home about but I think it was pretty good considering full retail is about $3.7k

Sounds like a good deal, local pawn shop had an orange set for 1700.

 

[jrherald420]

Nice.

 

[Beaubeau]

Picked this classic 78 up at less than half of retail in aus$

 

[Jeeper]

Sounds like a good deal, local pawn shop had an orange set for 1700.

I hate you. You ****. I paid 1800 but it was new and arctic silver. Got it off of craigslist from a former snap on dealer.

Did i mention I hate you.

 

[bobcatdan]

Well after reading evey page of this thread, I finally got some pictures of my setup.

 

[bobcatdan]

Some more drawer shots, my puller set and the service truck box. Someday I take some drawer shots of the road box.

 

[Jawn]

I hate you. You ****. I paid 1800 but it was new and arctic silver. Got it off of craigslist from a former snap on dealer.

Did i mention I hate you.

I don't ****, I didn't buy them... so don't hate me, go hate the guy that bought the blue set for $1k.

 

[bobcatdan]

I had the camara out yesterday so I figured I'd snap a pic of my recent CL snag... Snap-On KRA-4114\4107 combo.

I had a box just like with the full locker. The amount of tools you can fit in those drawers is amazing. A few years after I traded that box, a bought a used KRA 4813, the double bank version of the 4107 for at home. I hated that box, the drawers were just to damn small. I sold it after about a year.

 

[Hyster Gareth]

Lovely set up Bobcat Dan. Really like your Snap On roadchest an awesome bit of kit

 

[chris6278]

I had a box just like with the full locker. The amount of tools you can fit in those drawers is amazing. A few years after I traded that box, a bought a used KRA 4813, the double bank version of the 4107 for at home. I hated that box, the drawers were just to damn small. I sold it after about a year.

Love that color. Nice looking box!

 

[ShadowRuleZ]

Looks like there's a bit of discussion allowed in here, so I figured I'd might as well ask a question. Does anyone know if the bluepoint toolboxes like the one in this thread http://www.garagejournal.com/forum/showthread.php?t=44074 are made in the US?

 

[cgv69]

I had a box just like with the full locker. The amount of tools you can fit in those drawers is amazing. A few years after I traded that box, a bought a used KRA 4813, the double bank version of the 4107 for at home. I hated that box, the drawers were just to damn small. I sold it after about a year.

I agree, I really love the full width drawers. The way I see it is, I can always partition off a full width drawer if need be but I can't stretch a narrow drawer. You're also right about the amount of storage this setup has. I moved over all my tools and am amazed how empty this box still is. I guess I just need to buy more tools!

I would love to have the matching side locker but I'm not holding my breath on finding one for a price I'm willing to pay

 

[onewaydave]

Bobcatdan, nice use of space. Love the decor and all.

Really, I want to ask for some pics of the yellow, blue and red socket trays in the 2nd and 3d pics of post #8158. If possible, where did they come from, mfgr, after market, home made?

Dave.

 

[Holyroller125]

Well after reading evey page of this thread, I finally got some pictures of my setup.

Bobcatdan, Where do you get your pliers from?

 

[archirelic]

Bobcatdan, Where do you get your pliers from?

Snap-On.

 

[jeffmoss26]

Nice setup, bobcatdan!!

 

[bobcatdan]

Bobcatdan, nice use of space. Love the decor and all.

Really, I want to ask for some pics of the yellow, blue and red socket trays in the 2nd and 3d pics of post #8158. If possible, where did they come from, mfgr, after market, home made?

Dave.

The yellow and red trays are mac trays that came with the socket sets. The blue trays are cornwell. I personally always liked the metal trays the best, but everybody has gone away from them for some useless, space hogging plastic do hicky.

 

[bobcatdan]

Bobcatdan, Where do you get your pliers from?

Yes most in the main box are SO, but there is a few mac, knipex and even channellock in there. I went a little overboard a few years ago on the plier drawer. It was a real hodge podge of mostly used hand me downs and I wanted a match set, I can be OCD when it comes to tools. My road box has channellock and some klein. I like those everybit as much as the SO.

 

[NoNN37]

my home toolbox. crappy cell pics

 

[bobemmerich]

Another score of mine. Don't quite know what I'm gonna do with it yet. Free is always good....

 

[pdizzleinmt]

Got this from my grandpa last week

Sent from my DROID RAZR using Tapatalk 2

 

[redwrench60]

Well after reading evey page of this thread, I finally got some pictures of my setup.

Hey Dan, I'm diggin' on your four way angle wrench set. What's that go up to...like 2"? Thats awesome. I wanna be like you when I grow up! Looks like you're about ready to add the second set of drawer slides to your box. Lotta weight in those drawers.

 

[bobcatdan]

Set goes to 1 5/8". I don't really have no need for angle wrenches any bigger. I have std combos not picture up to 2", but those mainly hold a shelf under the bench from getting up and running away.

 

[Gasser Built]

Upgraded my superman toolbox finally

 

[xurusaibobx]

woow! is that a master series?

 

[nathan_454]

krl1033! you'll love it

 

[Gasser Built]

woow! is that a master series?

Yes it is a KRL1033 flat black

krl1033! you'll love it

I love the price even more.

 

[Quick01GT]

Yes it is a KRL1033 flat black



I love the price even more.

What's "the price"

 

[Bob Heine]

$10,800.00?

 

[pacsguy]

was that 1033 part of the las vegas special?

 

[Gasser Built]

What's "the price"

Gave $500 down and Snap-on credit is gonna carry $1500 no interest for 6 months.
I originally paid for my trade in $2750 for the rollcab and $300 for the top chest.
So you could say that I paid $5050 for this new box.

was that 1033 part of the las vegas special?

No, he had it before the show. He did show me the boxes that they had on display that they didn't want to take back. They were going for 40-60% off