To avoid these ads, REGISTER NOW!

Let's see your toolbox.

To avoid these ads, REGISTER NOW!
N

Nanashi

Well-known member
Joined
Mar 30, 2013
Messages
384
slowmaro305 said:
Yes those who are already responded are correct. Its the matco 30 inch breaker bar
Click to expand...

Do you have any issues getting to those half inch sockets in the back? I have an epiq 68" and the drawers always seem to open an inch shy of full open. I need to really pull to get it open the whole way. All my drawers seem to work like that.
 
H

HighPlainsWrencher

Well-known member
Joined
Jun 10, 2013
Messages
218
Here is my set up for now.

Side cabinet has tap and die sets, bolt and nut extractors, knee pads, drill bits, pump gun and reference material. it has a SYA drawer then the other two are adjustable wrenches, air chucks magnets blow gun ect.

The 6 drawer side box has misc, punches, picks, screwdrivers, tappet gauges, bigger hex bit sets, all my 1/4 drive stuff, chemicals, loctite products, DMM. I am sure I forgot a few things.
 
Last edited:
B

Burgerkong

Well-known member
Joined
Apr 17, 2010
Messages
2,501
Location
Markham, Ontario, Canada
Them UT22's just keep on piling up, just got another Canadian made one with a shiny SO emblem. That's two within a year! The best part? It's almost mint (save for some rust on the side of the top cover) for a whopping $25, AND it was delivered to my house!. :willy_nil

deio.jpg


do44.jpg


jukr.jpg


okm3.jpg


yyp9.jpg
 
M

Mugen AP1

Well-known member
Joined
Aug 17, 2009
Messages
252
Location
Toronto
Burgerkong said:
Them UT22's just keep on piling up, just got another Canadian made one with a shiny SO emblem. That's two within a year! The best part? It's almost mint (save for some rust on the side of the top cover) for a whopping $25, AND it was delivered to my house!. :willy_nil

deio.jpg


do44.jpg


jukr.jpg


okm3.jpg


yyp9.jpg
Click to expand...

Interested in parting with one? I'm in Woodbridge
 
N

nuklbstr83

Well-known member
Joined
Mar 8, 2012
Messages
364
Location
md/pa
craigslist buy for $20. Kennedy hand carry Box.

mint condition, but not for long. about to be used as my everyday field box.
 

Attachments

  • IMAG0575.jpg
    IMAG0575.jpg
    146.3 KB · Views: 98
  • IMAG0577.jpg
    IMAG0577.jpg
    133.6 KB · Views: 103
  • IMAG0578.jpg
    IMAG0578.jpg
    137.2 KB · Views: 102
Z

zkling

Well-known member
Joined
Jan 23, 2007
Messages
16,939
Picked this up at a garage sale this past saturday afternoon. I gave the full asking price of $50 for everything in the photo. Actually the box was $50, and they threw in the 3 hammers for free which were originally $1 each. They wouldn't even take $55, I tried. It was an older couple, the gentleman acted like I was doing him a favor for getting the tool box out of his garage :dunno:

I was told that all the contents were sold off earlier that day and nobody wanted to purchase the box. :eek: I really want to know what the contents were and went for. :willy_nil

After getting it home, and throwing away the old cork drawer liners :puke:. The bottom drawer wouldn't close properly. I carefully pulled it out and found the keys (both working) with a super sweet key chain that is an actual image of the box. :D Boxes are a KR637 and KR657, 1988 barely older than me. All ball bearing except for a small drawers on the top. Pretty decent condition, NO rust. The guy had a wood / body shop in his garage, so they were pretty dusty.

The bottom box works great. Unfortunately the top box has a few (3) destroyed drawers. :sad: As can be expected at this price I suppose. Be prepared for a bunch of questions. This is my first dabble into ball bearing boxes, which I know nothing about. Last picture is my current box that I plan on replacing with this. Think the old top is going to a friend and the bottom will be used as a cart/stand. Lots of work ahead of me, but hopefully it will be worth it. :beer:

EDIT, Sorry I just realized I didn't take a pic with the top box open. It has 5 wide drawers and 5 narrow drawers on the right hand side. 33" wide box.
 

Attachments

  • 100_1877.jpg
    100_1877.jpg
    37.4 KB · Views: 181
  • 100_1880.jpg
    100_1880.jpg
    60.2 KB · Views: 130
  • 100_1879.JPG
    100_1879.JPG
    141.7 KB · Views: 117
  • 100_1513.jpg
    100_1513.jpg
    133.2 KB · Views: 145
  • 100_1876.jpg
    100_1876.jpg
    51.3 KB · Views: 117
  • 100_1892.jpg
    100_1892.jpg
    86.5 KB · Views: 114
Last edited:
B

Burgerkong

Well-known member
Joined
Apr 17, 2010
Messages
2,501
Location
Markham, Ontario, Canada
zkling said:
Picked this up at a garage sale this past saturday afternoon. I gave the full asking price of $50 for everything in the photo. Actually the box was $50, and they threw in the 3 hammers for free which were originally $1 each. They wouldn't even take $55, I tried. It was an older couple, the gentleman acted like I was doing him a favor for getting the tool box out of his garage :dunno:

I was told that all the contents were sold off earlier that day and nobody wanted to purchase the box. :eek: I really want to know what the contents were and went for. :willy_nil

After getting it home, and throwing away the old cork drawer liners :puke:. The bottom drawer wouldn't close properly. I carefully pulled it out and found the keys (both working) with a super sweet key chain that is an actual image of the box. :D Boxes are a KR635 and KR657, 1988 barely older than me. All ball bearing except for a small drawers on the top. Pretty decent condition, NO rust. The guy had a wood / body shop in his garage, so they were pretty dusty.

The bottom box works great. Unfortunately the top box has a few (3) destroyed drawers. :sad: As can be expected at this price I suppose. Be prepared for a bunch of questions. This is my first dabble into ball bearing boxes, which I know nothing about. Last picture is my current box that I plan on replacing with this. Think the old top is going to a friend and the bottom will be used as a cart/stand. Lots of work ahead of me, but hopefully it will be worth it. :beer:

EDIT, Sorry I just realized I didn't take a pic with the top box open. It has 5 wide drawers and 5 narrow drawers on the right hand side. 33" wide box.
Click to expand...

:bowdown: :thumbup:
 
B

Burgerkong

Well-known member
Joined
Apr 17, 2010
Messages
2,501
Location
Markham, Ontario, Canada
Mugen AP1 said:
Interested in parting with one? I'm in Woodbridge
Click to expand...

Sorry, I was going to donate one to my school's racing team, it's been spoken for!

I started migrating my stuff from the older box to the newer one today and did some reorganizing (those UT22's can hold a lot, its not even full yet, have an entire lower compartment to fill!). My beater tools are there, don't expect anything nice :). I do some contracting, mostly for friends and family, and if I can't get it fixed with the stuff in the box, it's not a good thing (for them, cash wise).

Oh, also gave it a quick clean and polish today.

lo6s.jpg


y5ih.jpg


2dqu.jpg
 
Last edited:
Z

zkling

Well-known member
Joined
Jan 23, 2007
Messages
16,939
Burgerkong said:
I started migrating my stuff from the older box to the newer one today and did some reorganizing (those UT22's can hold a lot, its not even full yet, have an entire lower compartment to fill!).
Click to expand...

That looks really nice. Well organized and SUPER clean. Must be a joy to work out of, or heck just to look at. :drool: :beer:

Burgerkong said:
Sorry, I was going to donate one to my school's racing team, it's been spoken for!
Click to expand...

Are you a current or ex FSAE guy? :3gears:
 
B

Burgerkong

Well-known member
Joined
Apr 17, 2010
Messages
2,501
Location
Markham, Ontario, Canada
zkling said:
That looks really nice. Well organized and SUPER clean. Must be a joy to work out of, or heck just to look at. :drool: :beer:



Are you a current or ex FSAE guy? :3gears:
Click to expand...

Neither, I help the team out whenever I can, but never formally joined. The guys leading it are dicks and drive it into the ground year after year, plus we don't really change anything after each season and it gets maddening. There's a clear disconnect between the mechanics and the designers. I have a couple friends on the team and they share interesting stories with me.
 
Z

zkling

Well-known member
Joined
Jan 23, 2007
Messages
16,939
Burgerkong said:
Neither, I help the team out whenever I can, but never formally joined. The guys leading it are dicks and drive it into the ground year after year, plus we don't really change anything after each season and it gets maddening. There's a clear disconnect between the mechanics and the designers. I have a couple friends on the team and they share interesting stories with me.
Click to expand...

Dang that *****. So I take it you are still in school? BSME? I thoroughly enjoyed the experience, learned a lot, put a lot into it. Going to competition was well worth it IMHO. Such a great experience.
 
S

slowmaro305

Member
Joined
Sep 24, 2011
Messages
10
SC-AW11 said:
Hey what is that red Mac electrical tool? And what is that OBD2 looking plug for? Also, whats in the boxes, and what constitutes a tool to go in them lol?


As someone said, nice set. But what have you used them for?



And thats a very nice lookin set of impacts. what kind are they? how much did you get them for? where from?


Thank you!!
Click to expand...

The red mac tool is a battery tester. The obd cord is a memory saver when changing a battery. The boxes have more random battery wrenches, brushes etc. When i had smaller tool boxes then the epic they took up less room then laying each tool flat.

The snap on set gets used daily on alignments. The best tool by far i have ever found.

The swivel socket set is grey pneaumatic. Dont recall the price anymore, i have had them for a while. They do have a lifetime warranty though!
 
To avoid these ads, REGISTER NOW!
S

slowmaro305

Member
Joined
Sep 24, 2011
Messages
10
Nanashi said:
Do you have any issues getting to those half inch sockets in the back? I have an epiq 68" and the drawers always seem to open an inch shy of full open. I need to really pull to get it open the whole way. All my drawers seem to work like that.
Click to expand...

Yes i do. I pull those half inch racks forward just a little. But throughout the day of slamming the top drawer shut they always creep back.

My other complaint is i wish the middle drawers were just a little bit taller. I had to rearrange a few times because of cases or tools hitting when trying to close the drawers. Overall i love the box and have plenty of room for now lol.
 
Last edited:
O

Outlawmws

Well-known member
Joined
Aug 9, 2011
Messages
39,080
Location
The Badlands
slowmaro305 said:
Yes i do. I pull those half inch racks forward just a little. But throughout the day of slamming the top drawer shut they always creep back.

My other complaint is i wish the middle drawers were just a little bit taller. I had to rearrange a few times because of cases or tools hitting when trying to close the drawers. Overall i love the box and have plenty of room for now lol.
Click to expand...

Cut a piece of 1X to lay back there so the socket rails have no place to go. Sure you lose near an inch of space back there, but it doesn't sound like you are using it...
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom