Let's see your toolbox.

Outlawmws · Sep 20, 2014

panknuckshovel said:
CAREFUL!!!!! Those are the ratchets that strip nuts. SNIP.

I respectfully disagree, those are the ratchets that get nuts off, and gets things bolted tight! :evil:

(If those are his daughters, I'm a dead man...) :pimpflash

spoon671 · Sep 20, 2014

LORDDiESEL said:
^^ how come you can see the spot welds on the left side drawers?

And the right side drawers too.

I haven't had the chance to surf this entire thread..I'd love to see some German boxes.

MechanicNamedJohn · Sep 20, 2014

Outlawmws said:
I respectfully disagree, those are the ratchets that get nuts off, and gets things bolted tight!

(If those are his daughters, I'm a dead man...)

LOL. Those are not my daughters, they are in their mid 20's, I'm 36.

spacedoutbob · Sep 21, 2014

I like that comment about the Old Timer, 1978, I bought my first Snap On Tool Box in 1976, I guess that makes me an Old Timer.

Bob

619DioFan · Sep 21, 2014

MechanicNamedJohn said:
I keep my ratchets in the top drawer.

When I saw this picture I ran and looked in my top drawer. no pretty girls popped out. all I saw were impact sockets and prybars. darn my rotten luck. after hours must be wild at Johns shop. probably worthy of a pay per view.

jml93 · Sep 21, 2014

I'll have it posted in a couple weeks, but I've got a 60" Snap-On Epiq in gun metal gray on the way. Should be here in 4 weeks or so.

ADSR · Sep 21, 2014

MechanicNamedJohn said:
I keep my ratchets in the top drawer.

That's not much of a test for that drawer. You need a couple of plumpers in there to demonstrate the weight capacity of the drawer. :lol_hitti

Boost Creep · Sep 21, 2014

that mac has nothing on this

Dave_C · Sep 21, 2014

I guess it's my turn as the new guy to post mine up! Diesel fitter from Aus, all the gear I need for work in these two boxes.

Sockets

Metric combo/gear drive spanners

Imperial combo/ring/open end spanners. Need some gear drives too.

Rattle guns/torquing gear/misc.

Hammers/punches/shifters/ect.

Pliers/spare screwdrivers/electrical.

Tube sockets/electrical testing/measuring/misc.

3/4 drive/3/4rattlegun/24" shifters/ stilson wrench.

Screwdrivers/aerosol cans.

Thanks for looking.

wyo george · Sep 21, 2014

That's a neat chest Dave, I like the way it's set up.

Sent from my iPhone using Tapatalk

BK13 · Sep 21, 2014

Nicely done, Dave!

Dave_C said:
Sockets

senator52 · Sep 21, 2014

Dave_C said:

How do you like the quality of the cart? Been looking for something similar.

spoon671 · Sep 21, 2014

@senator52, here you go.

http://www.gedore.de/en/products/group_overview.html?oe_opt[list_set]=210572

flyingtpot · Sep 21, 2014

Snapster Storage System keeps growing...

First the KRL1001BPM was found on the Snappy truck. It was delivered to my shop.

Then Mr. Snappy made a deal with me on the custom color KRA5315BPM top chest. It was then delivered to my shop.

Next I found a fantastic deal on the KRL1251PBO top chest. It had to be rescued to get it to my shop.

Then just recently Mr. Snappy made a deal with me on the KRL1056CPM roll cab. It was delivered to my shop.

I've not decided on what piece of tool storage is next in the system. Maybe painting the KRL1251PBO in cranberry will suffice for awhile.

Dave_C · Sep 22, 2014

Thanks everyone!

senator52 said:
How do you like the quality of the cart? Been looking for something similar.

The quality of this cart is very good, doesn't seem to be in any way inferior to my fathers snap on cart. It has ball bearing drawers with slide locks to open them. Very good bang for buck!

1foxracing · Sep 22, 2014

New additions to my Harbor Freight 44's, I'm sure the Snap On badges are more poplar but I like these Wright Badges.

merbie · Sep 22, 2014

They look cooler than the snap ons matches the classic look of the 44

Sent from the sticks

StackedDodge96 · Sep 23, 2014

Had to do some reorganizing of this drawer to fit my new tap and die set. If it was 1/4 inch taller I could stack my thread restorer and remover set ontop of each other.
Looks like Im going to be breaking into the bottom drawer soon!

90zcar · Sep 23, 2014

StackedDodge96 said:
Had to do some reorganizing of this drawer to fit my new tap and die set. If it was 1/4 inch taller I could stack my thread restorer and remover set ontop of each other.

Looks like Im going to be breaking into the bottom drawer soon!

Do u have drawer pics of the other drawers? Would like to see em

Sent from my iPhone 5s using Tapatalk

shaggymutt1 · Sep 23, 2014

I don't have a garage so I have this in my room!

spoon671 · Sep 24, 2014

That's crazy!

cadavjo · Sep 24, 2014

shaggymutt1 said:
I don't have a garage so I have this in my room!

Dude, I feel your pain. I have a shed, but it is so tired of all the **** I bring home.

kool_BOY8323 · Sep 24, 2014

cadavjo said:
Dude, I feel your pain. I have a shed, but it is so tired of all the **** I bring home.

same here...shed with 3 26-27" stacks, the tool cart, and a 27" top in it. no room to do anything with any of the tools in there..gotta bring em all outside..

all but the 27" top pictured..

wagzilla · Sep 24, 2014

MY epic tool box

I got this about a year ago and never put any pic's up

[/URL][/IMG]

[/URL][/IMG]I really liked my purple box but I have out grown it. I got that in 1996 and I got good money for it.

wagzilla · Sep 24, 2014

[/URL][/IMG]

[/URL][/IMG]
It will take me along time to set up, I filled it up in 3 hrs and I have been moving stuff around for a year!!! good times

James

StackedDodge96 · Sep 24, 2014

90zcar said:
Do u have drawer pics of the other drawers? Would like to see em

Sent from my iPhone 5s using Tapatalk

They are all posted somewhere in this thread, but ill just post a couple.

jfcasey · Sep 24, 2014

Hey stacked dodge is that a mix of metric and standard I see or do you pretty much just have standard working on deere?

trailmix · Sep 24, 2014

68" Epiq, Titanium trim

and a couple drawer pics

GMTECH1 · Sep 24, 2014

Looks good trailmix

Sent from my iPhone using Tapatalk

StackedDodge96 · Sep 24, 2014

jfcasey said:
Hey stacked dodge is that a mix of metric and standard I see or do you pretty much just have standard working on deere?

The right side of my box is meteric (wrench and socket drawers) left side is standard. Both equal mixes. Deere is 90% meteric, but they do throw standard in the mix. Everything that requires a 3/4 is usually standard

Trailmix, nice looking box bro!
Jealous of the top! How do you like it, is it worth the money?

Ruger_556 · Sep 24, 2014

StackedDodge96 said:
Everything that requires a 3/4 is usually standard

SAE usually works fine in 3/4 drive even if it isn't :lol_hitti

I only have a few metric 3/4 sockets.

trailmix · Sep 24, 2014

StackedDodge96 said:
The right side of my box is meteric (wrench and socket drawers) left side is standard. Both equal mixes. Deere is 90% meteric, but they do throw standard in the mix. Everything that requires a 3/4 is usually standard

Trailmix, nice looking box bro!
Jealous of the top! How do you like it, is it worth the money?

worth every penny! usually have my makita and stream light chargers on top plugged in but just moved shops. I worked without it when i first got the box for a couple months and after seeing my buddies ordered one and could never go back.

cagullett1 · Sep 24, 2014

Nickmm said:
I'm going to lay it on thick here, as this is a tool forum, I hope people don't mind!
-Turqoise Mac box is my first, lower half is sold. I still keep the top.
-Small blue box was my Field box, gave away.
-HF tool cart was my other first, also sold.
-Blue Montezuma was my first Large box at my new job, sold for my green Tool Vault one.
- I now keep my Green tool vault box (72x30) and Mac box at home.

The last photos, showing I have a knack for chaos. Changing jobs and buying a house plus moving in, still haven't finished the task of my garage after 9 months.

I need more photos of drawers in my green tool box. I'll do more on my return home. If you want to see most of my tool/toolbox photos, check my slideshow. In the 5-6 years I've had to provide my own tools at work, it shows my collections evolution/growth.

http://smg.photobucket.com/user/Chance901/slideshow/Tool Box Photos

Please tell me that's a Miata and you are doing an Exocet build

RedneckWelder · Sep 24, 2014

Love the Epiqs, desperately want a blue one with a hutch...beautiful boxes.

Probably going to get a 68" one when the time comes.

Mxjr12 · Sep 24, 2014

Stackeddodge96 where did you get the 12pt impact swiveles

amoney90 · Sep 25, 2014

Just upgraded from KRSC33 to this guy, to be honest it was over kill and I don't need much out of my MB1080 anymore but I got tired of baby stepping my storage so at least this way I shouldn't have to buy another box.

spoon671 · Sep 25, 2014

That's a pretty box! Is it crinkle black?

Jeepster425 · Sep 25, 2014

trailmix said:
68" Epiq, Titanium trim

looks good! I like that titanium trim, I got the titanium blue trim for my 68".

StackedDodge96 · Sep 25, 2014

Mxjr12 said:
Stackeddodge96 where did you get the 12pt impact swiveles

They are Sunex. I got the 3/8 dr metric and standard. 1/2 I have standards. The metrics are Gp 6 points. After todays battle with a backhoe drive shaft I will be ordering some deep 12points if they make them

K-Dog · Sep 25, 2014

Ooooooh
A white tool box.

BOLD.

Let's see your toolbox.

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Member

Well-known member

Well-known member

Well-known member

Member

Well-known member

Well-known member

Well-known member

Active member

Well-known member

Well-known member

Well-known member

Well-known member