Let's see your toolbox.

[TheToolMan]

The snap-on 1/8" set really is 1/8" drive not 3/8"". These are the smallest sockets i own, Down to 3/32". The turbo sockets really rock. The only bad thing id they are only good for 3-4 extractions then they get dull, Thank God they are warranted through snap-on.

scottmlew

I know it wasn’t you, I know who it was. They are just jealous that’s all. I should show you my list of sets that I had to fill out for insurance for work. I did this about 6 months ago had to take a picture of everything. I know some people will or will not believe be but it totaled over $40k. This is not all the drawers. I should start another thread with all the Pics I have. Pretty impressive.

SpiderGears.
I do work on cars as a hobby but not for work. I work on industrial electronics and mechanics. Mostly electronics. But I also rebuild electric motors hydraulics and pneumatics.

 

[scottmlew]

The snap-on 1/8" set really is 1/8" drive not 3/8"". These are the smallest sockets i own, Down to 3/32".

Is it this set? http://buy1.snapon.com/catalog/item...group_ID=21504&store=snapon-store&dir=catalog

So you don't need to pull up the link, that's a 1/8 drive handle and 4 sockets, 1/8" down to 3/32"

Are there specific applications you've found that useful for?

This is not all the drawers. I should start another thread with all the Pics I have. Pretty impressive.

Please do!

 

[snapmom]

 

[kwhitelaw]

I should start another thread with all the Pics I have.

yes, you should

 

[SpiderGearsMan]

Just keep adding to the pile here

 

[krusty the clown]

SpiderGears.
I do work on cars as a hobby but not for work. I work on industrial electronics and mechanics. Mostly electronics. But I also rebuild electric motors hydraulics and pneumatics.

i though you were getting a snap on route?

 

[krusty the clown]

if you clean up my sockets , I will take you to burger king

make that the sizzler that box needs waxed

 

[TheToolMan]

Is it this set? http://buy1.snapon.com/catalog/item...group_ID=21504&store=snapon-store&dir=catalog

So you don't need to pull up the link, that's a 1/8 drive handle and 4 sockets, 1/8" down to 3/32"

Are there specific applications you've found that useful for?



Please do!

Yup thats the set. I use it for my work, Electronics.

 

[TheToolMan]

i though you were getting a snap on route?

Negative, not me. Although i would like to own the Snap-on truck i do not want to own my own demise. I love snap-on products. They are like jeweles to me. but what a racket.

 

[TheToolMan]

Oh and the super short sockets are shorter than all the others i have but havent HAD to use them yet. I have used them because they were cool but not in a spot where a ratcheting wrench or regular socket wouldnt fit. I have had them for several months now. Yes you can interchange other ratchets and such.

 

[Diesel_Crawler]

Originally Posted by TheToolMan
I should start another thread with all the Pics I have.

Please "beg"

 

[stevejh82]

Snapmom, looks like you've been busy filling that box you got off of craigslist here a while back. Good Stuff

 

[snapmom]

One of these years, will finish it.

 

[Moose-LandTran]

if you clean up my sockets , I will take you to burger king

Deal!

I'd actually like to have a look through your toolbox, i bet there's some interesting stuff in there.

 

[mikemolzahn]

Is it this set? http://buy1.snapon.com/catalog/item...group_ID=21504&store=snapon-store&dir=catalog

So you don't need to pull up the link, that's a 1/8 drive handle and 4 sockets, 1/8" down to 3/32"

Are there specific applications you've found that useful for?



Please do!

On aircraft they are used when you deal with the smaller avionics boxes.

Join in and Be Heard,
Mike

 

[SpiderGearsMan]

I have to do a drawer tour through all ten boxes
soon , I have a lot of free time these days

 

[Moose-LandTran]

I have to do a drawer tour through all ten boxes
soon , I have a lot of free time these days

That sounds ominous.

 

[t100]

finally filled my recently purchased tool box:

this one was my first truck brand box, sold it along with a top box today.

these are my other two boxes:

 

[snapmom]

T100, I like your little mirror on front of your box.

 

[Wesley B]

That's a magnetic tray.

 

[snapmom]

You have to see it from a girls point of view.

 

[t100]

You have to see it from a girls point of view.

credit to you, i got the idea of putting the speeder on the lid from your post.

 

[SpiderGearsMan]

bttt---------

 

[wadd1]

Verrrry nice

 

[wadd1]

Latest addition for the metric stuff
need a bigger bottom roller now

 

[thomask]

This is actually one of my very first posts here, I'm an apprentice tech, 2nd and last year in school, studying Auto Technology.

NEXUM; Nice tools and very organized. Like your use of the clear plastic plano type boxes. Great for small parts/tools. Keeps everything organized, saves time, keeps small things from getting lost. Good luck on your schooling.

t100; you too, great organization and nice collection. How long you been collecting these tools?

Wadd1 I may have to cut a hole in my ceiling for clearance if I keep adding sections, too.

 

[Born_Annoyed]

Just added a new side box. I had to fab a bracket to hang the locker..Also added 2 legs made out of steel.

 

[djd99]

This is my in progress, It will be in progress until I die. I see some dream boxes here, someday

 

[CD360]

This is my in progress, It will be in progress until I die. I see some dream boxes here, someday

in your middle picture, what brand of wrench rails are those? they look prety tall. would they fit in a 2" drawer?

 

[djd99]

in your middle picture, what brand of wrench rails are those? they look prety tall. would they fit in a 2" drawer?

No There in a Deep drawer and take up alot of space, but there organized. They were made by ernst, They now have a low profile set for shallow drawers.

http://www.ernstmfg.com/catalog/product_info.php?cPath=24_20&products_id=68

 

[CD360]

No There in a Deep drawer and take up alot of space, but there organized. They were made by ernst, They now have a low profile set for shallow drawers.

http://www.ernstmfg.com/catalog/product_info.php?cPath=24_20&products_id=68

those look pretty nice. might have to give those a try.

 

[Mr.Nutcase]

This is madness.....

 

[SpiderGearsMan]

better than lista ? equipto?
http://www.stanleyvidmar.com/automotive-storage

 

[SpiderGearsMan]

ome photos of my side job boxes , there is more stuff buried around the house

 

[SpiderGearsMan]

 

[SpiderGearsMan]

 

[Diesel_Crawler]

Hey SpiderGearsMan, your Wife only let you use the Camera to take 1-2 pictures a day or what?

 

[SpiderGearsMan]

sorrry , the box is 2 hours away , it was raining and the camera setting was wrong , figured I would share

 

[cwstevens92]

Here is my set-up

 

[justinmc]

Here is my set-up

How are those US General boxes holding up in a professional environment? Looks like you do some sort of fabrication or industrial service? Thats a nice string of boxes!