Let's see your toolbox.

[ragdoll]

Some pics from last weekend...

 

[dazed8596]

Hey i am a maintenance mechanic. .been doing it for years. .and yourself?

 

[maintguy]

Hey i am a maintenance mechanic. .been doing it for years. .and yourself?

sweet. that's what I do, Well was doing, I left my last job a month ago. I am an licensed electrician by trade

 

[fordgasm]

What make box is that? Looks nice.

Sent from my Robin using Tapatalk

Not sure if youre asking me or not but its the US General Pro 56 inch top & bottom from Harbor Freight.

 

[dazed8596]

sweet. that's what I do, Well was doing, I left my last job a month ago. I am an licensed electrician by trade

It can be an insanely stressful job depending where you work... We also hire electricians. .i found some photos of putting my box together..and some newer tool purchased

 

[dazed8596]

Most of my box is facom.mac..and a few craftsman..

 

[bsg1]

Thanks .. I just started buying nice tools here and there when i can. ..most my coworkers go with hf which is fine....but i recently bought a facom 3/8 ratchet forgot it out of my tool box..came in the next day with it missing...it has been bothering me for almost 1 week..cant get over it...anyone have similar problem? Here are some of my tools

I have a few more draws i forgot to save the photos..

it's possible that your ratchet was misplaced, but it is probably in someone's home box. if you haven't already, i suggest that you let the shop and coworkers know that your ratchet is missing. this can serve as a heads-up for others. after that, consider it a lesson learned and move on.

 

[BK13]

Thanks .. I just started buying nice tools here and there when i can. ..most my coworkers go with hf which is fine....but i recently bought a facom 3/8 ratchet forgot it out of my tool box..came in the next day with it missing...it has been bothering me for almost 1 week..cant get over it...anyone have similar problem?

I just got back a 5 gallon bucket of tools that my GF's POS oldest son stole and then pawned... among the tools was a new Proto version of a Facom ratchet that I had never even used. Luckily, the little punk now lives in Florida. Still need to replace the M12 Fuel hammer drill and Bosch ROS that I probably won't get back...



Sent from my iPhone using Tapatalk

 

[Tallpilot]

I am in a 30" 5 drawer cart and 18" 7 drawer side cabinet. I will move into a 44" in a couple months. I have a few drawers which aren't very well organized; especially my pliers drawer since it isn't deep enough for the racks that arrange the pliers on their sides. But I am pretty happy with the rest.

 

[Richard Cranium]

tall pilot, nice looking layout.

 

[Tallpilot]

tall pilot, nice looking layout.

Thank you very much!

 

[FOCUS.FREAK]

I am in a 30" 5 drawer cart and 18" 7 drawer side cabinet. I will move into a 44" in a couple months. I have a few drawers which aren't very well organized; especially my pliers drawer since it isn't deep enough for the racks that arrange the pliers on their sides. But I am pretty happy with the rest.

Very organized. Space saving.


Sent from my iPhone using Tapatalk

 

[MarchHare94]

My boxes. The grey roll cart was sold a while ago. Wish I never sold it. I'll post a better picture of the Matco box tomorrow when I get out of work.




Sent from my iPhone using Tapatalk

 

[IMStuner]

I am in a 30" 5 drawer cart and 18" 7 drawer side cabinet. I will move into a 44" in a couple months. I have a few drawers which aren't very well organized; especially my pliers drawer since it isn't deep enough for the racks that arrange the pliers on their sides. But I am pretty happy with the rest.

Damn I wish my tool box was this clean.


Sent from my iPhone using Tapatalk

 

[ABADWILLYS]

New to Me Snap On KRL. wasnt shopping for a box but...anyways, it has the Bedliner top, and carbon fiber drawer protectors. I kept this one for work and brought my 30+ year Old Snap On KR560/660 combo to my home shop. I cant part with it, bought it new in 1982 . Ill tell you what, working that many years with the same box, getting the right tool wasnt a thought process, now i changed up all the drawers, its been fustrating!!

 

[MarchHare94]

New to Me Snap On KRL. wasnt shopping for a box but...anyways, it has the Bedliner top, and carbon fiber drawer protectors. I kept this one for work and brought my 30+ year Old Snap On KR560/660 combo to my home shop. I cant part with it, bought it new in 1982 . Ill tell you what, working that many years with the same box, getting the right tool wasnt a thought process, now i changed up all the drawers, its been fustrating!!

I love the Bedliner on the tops, may have to pull the tops off my box and coat them!


Sent from my iPhone using Tapatalk

 

[Jaylee716]

New on left old on right


Sent from my iPhone using Tapatalk

 

[kb1982]

Here is my shade tree special 46" 9 drawer Husky. Most of the sockets are craftsman that I bought with my first tax refund check in 1999 when I was 17. Ive added some SK and Proto to replace some of the lost or broke pieces. I just received the Aircat 805-HT 3/8 air ratchet today. I believe it will truly do the rated 130 ft lb of torque. I torqued an engine cradle bolt down to 123 ft. lbs using my Snap On ATECHFR250B torque wrench, and was able to back it out without a problem.
CameraZOOM-20170315151237550 by kelly benningfield, on Flickr CameraZOOM-20170315151330139 by kelly benningfield, on Flickr[url=https://flic.kr/p/SVCmcj] CameraZOOM-20170315151520524 by kelly benningfield, on Flickr

[/url]CameraZOOM-20170315151437799 by kelly benningfield, on Flickr CameraZOOM-20170315151606874 by kelly benningfield, on Flickr CameraZOOM-20170315151633183 by kelly benningfield, on Flickr

 

[mjoekingz28]

Nice going kb1982

 

[Local]

Kb if you learned to drive stick you wouldn't be replacing your clutch. Just Kidding

 

[kb1982]

Kb if you learned to drive stick you wouldn't be replacing your clutch. Just Kidding

Sad part is, I have a clutch disc in my 1995 mustang that will need to be replaced when I start working on it again. Had a one way check valve fail and pressurized the crank case with 16 psi of boost. Rear main seal didnt like that one bit, coating my fairly new disc.

 

[Bldmovs]

Here is my shade tree special 46" 9 drawer Husky. Most of the sockets are craftsman that I bought with my first tax refund check in 1999 when I was 17. Ive added some SK and Proto to replace some of the lost or broke pieces. I just received the Aircat 805-HT 3/8 air ratchet today. I believe it will truly do the rated 130 ft lb of torque. I torqued an engine cradle bolt down to 123 ft. lbs using my Snap On ATECHFR250B torque wrench, and was able to back it out without a problem.

CameraZOOM-20170315151237550 by kelly benningfield, on Flickr CameraZOOM-20170315151330139 by kelly benningfield, on Flickr[url=https://flic.kr/p/SVCmcj] CameraZOOM-20170315151520524 by kelly benningfield, on Flickr

[/url]CameraZOOM-20170315151437799 by kelly benningfield, on Flickr CameraZOOM-20170315151606874 by kelly benningfield, on Flickr CameraZOOM-20170315151633183 by kelly benningfield, on Flickr

I was on the fence about this mobile bench. You've helped me make my mind up! [emoji41]


Sent from my iPhone using Tapatalk

 

[wagzilla]

New to Me Snap On KRL. wasnt shopping for a box but...anyways, it has the Bedliner top, and carbon fiber drawer protectors. I kept this one for work and brought my 30+ year Old Snap On KR560/660 combo to my home shop. I cant part with it, bought it new in 1982 . Ill tell you what, working that many years with the same box, getting the right tool wasnt a thought process, now i changed up all the drawers, its been fustrating!!

we have all been there my friend

James

 

[Wiggler72]

This Box is absolutely awesome!

 

[Koolmoose]

we have all been there my friend

James

Especially as you get older and have worked with your organized system for a long time!

 

[Caleb Swartz]

 

[red94chev]

Cleaned up the ol 1/4-3/8 drawer.

Sent from my Nexus 6P using Tapatalk

 

[KM223]

Cleaned up the ol 1/4-3/8 drawer.

Sent from my Nexus 6P using Tapatalk

Love the blue hard handles!

 

[red94chev]

Love the blue hard handles!

Me too [emoji106]

Sent from my Nexus 6P using Tapatalk

 

[West55]

Just picked this up yesterday. Now I need to find the matching top box. Let me know if anyone has one for sale.

 

[IMStuner]

Sent from my iPhone using Tapatalk

 

[serdvd6]

Before


After

 

[KM223]

Before


After

Nice after

 

[JUNK-MAN]

Better before.

Sent from my SM-G930V using Tapatalk

 

[chrisnazzy]

Before


After

I like the before and after. I love my KRL Snap-on box but one of my oil techs has a box just like your old one and it is a solid setup. Hopefully if you've gotten rid of it already you didn't givev it away. There is definitely alot of value there still.

Nice first post BTW. Nothing like a new Snap-on toolbox to bring you out of lurking.

Sent from my SM-G930P using Tapatalk

 

[Red89gt]

Good idea, here is my before:

And after:

 

[Baitcaster_23]

2 Harbor Freight 44" cabinets, custom built hutch.

 

[chrisnazzy]

2 Harbor Freight 44" cabinets, custom built hutch.

Well done sir. Very nice!

Sent from my SM-G930P using Tapatalk

 

[Project_shadow]

2 Harbor Freight 44" cabinets, custom built hutch.

I want one


Sent from my iPhone using Tapatalk

 

[BIG BACCHUS]

2 Harbor Freight 44" cabinets, custom built hutch.

Digging the computer with the "Snap-On" background