Let's see your toolbox.

[RbrtAWhyt]

I MUST have that for my son!!! How much and where do I get it!!

http://cgi.ebay.com/ebaymotors/Snap...tZMotors_Automotive_Tools?hash=item4a9ef75cca

 

[Shocker]

Looks great there 66Hertz. I like the way you have it organized.

 

[SSGTWC]

My setup:

 

[sasquach]

How the hell do you reach anything in that top box

 

[SSGTWC]

How the hell do you reach anything in that top box

I used to use a step stool. The top box is empty now, getting ready to sell it. Just needs a new slide set for the bottom drawer.

 

[TheCarbideRat]

Stuff happens.

The roll cabs are 2 Kennedy 3901MP and 1 International super heavy duty. I had a Matco 3bay but let it go in favor of what I have now.

 

[Davefr]

Just got the KRL's. However I just can't part with my old red friend.

 

[07Forester]

I REALLY need to just buy the rest of my SO wish list and get everything over with.


Took down old pics. New pics forthcoming

 

[07Forester]

And no....all the drawers are NOT full....YET

 

[Blk63Vette]

You guys have a nice collection!!

 

[mr2autoxr]

I have FINALLY gotten around to getting the new HF box organized and moved most of my stuff out of the 2 Craftsman boxes (no BB slides). Mostly Craftsman tools, but have been acquiring some Snap-On, Thorsen, Gearwrench, and Armstrong since getting addicted to this site.

Just a weekend wrencher on my race car. I am 29 and have been collecting since I've been about 18. But I can never have enough tools

Is the F80 ratchet stamped with USA unique? Seems most aren't?

Still haven't gotten the US General sticker all the way removed! LOL

Made my own plier rack out of some sheet metal. Good welding project!

Craftsman raised panel, CM polished ratcheting, GW polished ratcheting Flex Xbeam

CM raised panel, CM polished ratcheting

Welding C-clamp vise grips in yellow pouch

HF Composite, CM, Armstrong, F80, T72, Thorsen

Gearwrench boxed ratcheting, 20mm, 21mm, 23mm, 24mm, 25mm

Tach, Micrometer, line disconnect, etc

Chainsaw support drawer

Hole Saw Kit

My 3/4" set...used once or twice, so super low quality! lol

Saved this box from the trash, new latches, trim, paint. Made it my electrical travel box.

 

[alex211]

Just one drawer for now, metric stuff.

 

[manic_mechanic]

I have yet to see another Hammer Blue KRSC31.

Brand new and I got it for $450. Now I am broke again and have to wait until next month to buy more to fill it...Not that I don't have enough to fill it...Excuse the mess, I'm cleaning.

 

[Even 11]

Very cool cart Manic, did you end up selling your vintage Cman chest to fund it?

-Dane

 

[manic_mechanic]

Yeah. I needed a cart and a toolbox that locked. The C-Man didn't have a lock.

 

[582cobra]

Krl1001bpc

This is what I got.

$800.00 off craigslist, I had to buy 4 casters($686.00), Name Plate(14.00) and replace a couple drawer slides(warranty). The last guy used it as part of a pit box and used pretty hard but it stayed together. Everything works great it's just dinged and scratched.

 

[LeadDoggy]

like look thru here as I get ideas and motivation on organizing my own stuff

 

[murph64]

like look thru here as I get ideas and motivation on organizing my own stuff

So do I, but by the time I get home, those delusions of grandeur have left my head...





Andy

 

[selohssa]

Re: Krl1001bpc

this is what i got.

$800.00 off craigslist, i had to buy 4 casters($686.00), name plate(14.00).

wowwwwwwwwwwww!!!!!!!!!!!!!!

 

[582cobra]

They are out there just keep looking.

 

[582cobra]

Wow like good or wow like I got ripped off.

 

[RbrtAWhyt]

I cant believe someone would pay $686 for 4 castors...

 

[582cobra]

Jack *** here.

 

[Davefr]

I cant believe someone would pay $686 for 4 castors...

You haven't seen KRL castors!!

These castors are massive and probably have an individual load capacity measured in 1000's of lbs.

You don't find these on the shelf at Home Crapo.

Even with the castors that's a killer deal!!

 

[selohssa]

Wow like good or wow like I got ripped off.

I mean good WOW! I would pay that in a second.

 

[582cobra]

1,200 lbs glass filled Nylon

 

[582cobra]

Thanks selohssa, Thought I did good.

 

[crbnfbr]

I would have just got these casters for nearly 1/7th of the price. I wish they fit my box, but unfortunately the mounting plate is too big.

http://cgi.ebay.com/SNAPON-CRAFTSMAN-KNAACK-TOOL-BOX-CASTER-SWIVEL-BRAKE-8_W0QQitemZ190301621262QQcmdZViewItemQQptZTool_Boxes_Storage?hash=item2c4edc4c0e

 

[582cobra]

The casters are made by faultless and I guess you can just buy them through other channels for like $38 fixed and $125 swivel.

 

[RbrtAWhyt]

Jack *** here.

Nice to meet you, Jack

You haven't seen KRL castors!!

These castors are massive and probably have an individual load capacity measured in 1000's of lbs.

You don't find these on the shelf at Home Crapo.

Even with the castors that's a killer deal!!

Man, I'm sorry...I didn't realize that they were "KRL" casters. That makes all the difference in the world and TOTALLY justifies $686.

1,200 lbs glass filled Nylon

Impressive...

Thanks selohssa, Thought I did good.

Jack, thats all that matters.

The casters are made by faultless and I guess you can just buy them through other channels for like $38 fixed and $125 swivel.

Now thats more like it...

 

[582cobra]

For all of you who seem to be able to make so many comments.

Okay, BEFORE I spend $175.00 on a set of JI1022R35L drawer Liners. Can someone just let me know where I get them for $25.00 or so.

I am trying to get off the Jack list.(Jack ***)

 

[RbrtAWhyt]

For all of you who seem to be able to make so many comments.

Okay, BEFORE I spend $175.00 on a set of JI1022R35L drawer Liners. Can someone just let me know where I get them for $25.00 or so.

I am trying to get off the Jack list.(Jack ***)

Hey, don't mind me. I was in a funny mood yesterday. I didn't mean to give you too much of hard time. For the record I think you got a great deal on your box. One one hand it just blows my mind that replacement casters go for $686 for a set. One the other hand, thats not suprising for SnapOn stuff.

If you can live without genuine Snap-On drawer liners, you can get some off of E-Bay for a reasonable price and save yourself a few bucks:

http://shop.ebay.com/i.html?_nkw=sn...&_osacat=0&_trksid=p3286.c0.m270.l1313&_rdc=1

Another alternative is some velora foam sheeting available from:

http://www.closedcellfoams.com/volara.html

A buddy of mine bought a roll of it and made drawer liners for his box. They turned out well.

 

[582cobra]

It's all good. Thank you. I will look into them and report.

 

[Davefr]

If you can live without genuine Snap-On drawer liners, you can get some off of E-Bay for a reasonable price and save yourself a few bucks:

http://shop.ebay.com/i.html?_nkw=sn...&_osacat=0&_trksid=p3286.c0.m270.l1313&_rdc=1

Has anyone used this no name drawer liner? The Snap On liner is is sticky on both sides. It grips the drawer and one side and grips the tool on the top side. It doesn't bunch up or slide around like some other drawer liner.

Is this Ebay liner from the same supplier that makes it for SO??

 

[BlindViper]

Has anyone used this no name drawer liner? The Snap On liner is is sticky on both sides. It grips the drawer and one side and grips the tool on the top side. It doesn't bunch up or slide around like some other drawer liner.

Is this Ebay liner from the same supplier that makes it for SO??

I don't know about sticky on both sides. My draw liners have to have the tools removed and the liners adjusted every few months. So much so last clean they got a shot of spray adhesive in the corners.

 

[nczo6]

crbnfbr

What box do you have that won't accept those castors. I have a KRL 761 and 763 and would like to replace both sets with the ones from e-bay that are in your post.

 

[cvcman]

you guys ever just open drawers and mist lke WD40 over the tools inside to expell moisture ? My box is in an unheated garage and sometimes I heat it up but I see moisture on the scokets

 

[cvcman]

few more probbaly double posts....

 

[cvcman]

more junk probably more double posts

 

[sawatch]

Just picked this BP up after a few months of searching. It was close to home and I was able to trade a couple of rifles I got from my uncles estate. Basic price of guns was around $600. It's heavy duty and very clean. Can anyone tell me how to determine the date of mfg? This one's made in Canada and has the stickers. 5ft tallx30"wide. I'm a happy camper.