Looking for screwdriver that can store in it...

[Flybye]

a phillips bit, a flathead bit, and a 10mm 1/4 socket.

Anyone seen one with enough space in it for these 3?

 

[chrisnazzy]

a phillips bit, a flathead bit, and a 10mm 1/4 socket.



Anyone seen one with enough space in it for these 3?

I don't know if it's maybe more than you're looking to spend but the Snap on ratcheting screwdrivers have a bit storage cavity that could easily hold the bits you describe plus a 1/4" socket adapter bit and 10mm socket.

Sent from my SM-G930P using Tapatalk

 

[Flybye]

Their hot pink one looks *****.

 

[jfleisher]

These work for me...

https://www.amazon.com/dp/B07GVN1LBR/?tag=atomicindus08-20

 

[mikebaker1129]

I don't know if it's maybe more than you're looking to spend but the Snap on ratcheting screwdrivers have a bit storage cavity that could easily hold the bits you describe plus a 1/4" socket adapter bit and 10mm socket.

Sent from my SM-G930P using Tapatalk

If so,there is always the Williams version for $29.

 

[chrisnazzy]

If so,there is always the Williams version for $29.

True plus there seems to be hundreds listed on eBay at any given time and many sell for less than full retail.

I just went out and checked the fit in mine. If you clip the 10mm socket on a 1/4" socket adapter and drop it in first you can fit at least 3 more bits in there without interfering with the cap. I tried the 10mm/adapter plus five bits and while I could get the cap screwed on it didn't work out so well. Once I unscrewed the cap everything was initially stuck inside because the cap had press fit everything in there tightly.

So a 10mm socket with bit adapter and 3 additional bits no problem!

Sent from my SM-G930P using Tapatalk

 

[Flybye]

That is awesome! Thank you so much for testing it.

 

[Roundhouse]

I have a couple of these
I can test mine to see if those items will fit but I’m pretty sure they would