Menard's Deals Permathread!
- Thread starter pauls_workshop
- Start date
Super Sport
Well-known member
No, the "preview" of tomorrow's ad is already posted on their website.
BDestroyer8418
Well-known member
- Joined
- Dec 26, 2014
- Messages
- 157
How often does Menards run the Door Sale's. I know they have one going on now but I rather wait if possible. I still need to gut the rooms, flooring, paint but worse case I buy and just store for now.
Looking at these https://www.menards.com/main/doors-...ung-interior-door/4112604/p-1444448284771.htm
I hung a couple in a buddies house seemed decent. Haven't check Lowes's or HD yet.
Looking at these https://www.menards.com/main/doors-...ung-interior-door/4112604/p-1444448284771.htm
I hung a couple in a buddies house seemed decent. Haven't check Lowes's or HD yet.
If the frame is MDF I'd be careful. They used to offer an osb/plywood type frame for their interior doors, or a cheap wood. They were better. If it scratches deep or you out nails in it the mdf tends to blister out. With other types of sinks in and it's a simple fill and touch up. When I replace our interior doors if the stock is MDF I'll be ordering some instead. It seems they've switched a lot of stuff to mdf.
If you don't mind mdf 67 is a good price for a pre hung filled door. Usually you can get the hollow doors I'm referring to that are pre painted for that price on a sale. Downside is you have to paint them yourself (all my stuff is white so I prefer pre painted).
As for what you posted they put them on sale several times a year. If you need them any time soon I would scoop them up in case it's a while until they do it again.
If you don't mind mdf 67 is a good price for a pre hung filled door. Usually you can get the hollow doors I'm referring to that are pre painted for that price on a sale. Downside is you have to paint them yourself (all my stuff is white so I prefer pre painted).
As for what you posted they put them on sale several times a year. If you need them any time soon I would scoop them up in case it's a while until they do it again.
ishiboo
Well-known member
I don't bother putting in hollow core/foam filled doors anymore. They're cheap but they don't last. The only place I want a cheap door is a rental, and it doesn't make sense there because the first time someone taps it with a piece of furniture or anything there's a hole in it.
The Menards solid wood doors are okay. Not awful but far from the best.
TT_Vert
Well-known member
They finally tore down the old one in Hanover Park and the land is still vacant. They moved down to Schaumburg and Barrington.Same here, going on 15 years now.
Building a new one on the other side of town also now so that one will sit empty forever also I suppose.
I do like the remodel's all the stores are getting though. Basically moving the contractors/ building supply department to the back of the stores. Looks really nice!
Now they just need a register back there so if you got the wrong board outside you could just walk in the back door and exchange it, etc. Nope, still gotta walk all the way to the front of the store.
PeterT
Well-known member
Menards has the 12.5% pool chlorine for $3.99 / B1G1F,, seems fresh and 2 jugs got my pool to 10 ppm (shock level)
mikeb27
Well-known member
Anyone have a preview of next week’s Menards ad?
2manytools
Well-known member
I called my buddy who gets the paper earlier, and of course he is out of town.
Totally not deal related, but just visited the Menards site, and I see the "Menards Guy" passed earlier this month. I miss hearing him on tv. Quite the jovial person. RIP
mikeb27
Well-known member
Thank you.
I know at some point there were a handful of stores online that posted it early, but I can’t remember what they were.
I know at some point there were a handful of stores online that posted it early, but I can’t remember what they were.
Jeffbaker456
Member
mikeb27
Well-known member
11%?
Jeffbaker456
Member
Nope that ends today. This is the race to saving sale. I got it in the mail.
Sent from my Moto E (4) using The Garage Journal mobile app
next 4 weeks are expected to be regular ads.
mikeb27
Well-known member
Well that’s unfortunate. Was hoping they would extend it another week. Guess I gotta get my lazy *** up and to the store.
Thank you.
Thank you.
PeterT
Well-known member
SAVe BIG MoNEY at MEnARds
Sledge Hammer is back again. Starting sunday $2.99 after rebate until 6/3/18 Limit 2
Last edited:
PeterT
Well-known member
This weeks Menards add just keeps going, I didn't even have the patience to click through it all but i did see some good deals on Pond maintenance (colorant & algae control).
Also, those swiss made jig saw blades for .99
Also, those swiss made jig saw blades for .99
B_Bimmer
Well-known member
There is a stanley fatmax insulated screwdriver set for $5 after rebate that is very nice and gets great reviews in it's dewalt labeling. If you have any interest I would recommend it.
2manytools
Well-known member
PeterT
Well-known member
Menards BIG SALE
Jack's® Original Pepperoni Pizza - 15.4 oz
Sale 5/ $9.95
Jack's® Original Pepperoni Pizza - 15.4 oz
Sale 5/ $9.95
2manytools
Well-known member
last I saw, someone posted it would be 4 weeks of regular ads, which would wrap up today I think. Has anyone seen 11% starting tomorrow?
2manytools
Well-known member
Thanks
Ends today.
JRC3
Well-known member
I bet they change up for the 4th with a different sale. I'm hoping they do both.
PeterT
Well-known member
Menards has 2 big ads starting today: B1G1 on pool bleach
and
and
just a heads up.. i believe the pittsburgh (PPG) grand distinction is being clearanced out. It's on sale with a 6 dollar mail in rebate (my egg shell paint came to around 23 bucks a gallon.. good deal) but i noticed online it said the offer was good until 8/31.. usually that far into the future it's a clearance. IMO it's good paint, i use it on any trim i'm painting and have used it on walls, never an issue. and for that price it's a definite buy.
ambenz
Well-known member
Looking to buy rain barrels but it looks like I have to wait for the 11% rebate...*sigh* ...hopefully next week.
Starts 7/8
2manytools
Well-known member
I saw a couple rain barrels starting to clearance at HD a couple days ago. Might want to take a look there. Maybe stack with the 11% if you do find one at HD next week
Hope this is the proper place to ask this.
I was in Menards yesterday, looking at the basic MF screwdrivers. The acetate handled ones. I've seen other posters on here say they like them, so I hope to get some answers here.
Anyway, I noticed they do not seem to have any sort of "gripping" feature on the tips. No grooving or "roughing" on the surfaces. In particular the philips of various sizes and the slotted 3/16's and 1/4X4" ones. In the case of the slotted ones, the flat faces of the tips looked shiny and slick. To the point where you could almost use them as a very small mirror.
So, has anyone with these tools had problems with cam-out with the philips or slipping with the slotted ones?
Appreciate any insight.
I was in Menards yesterday, looking at the basic MF screwdrivers. The acetate handled ones. I've seen other posters on here say they like them, so I hope to get some answers here.
Anyway, I noticed they do not seem to have any sort of "gripping" feature on the tips. No grooving or "roughing" on the surfaces. In particular the philips of various sizes and the slotted 3/16's and 1/4X4" ones. In the case of the slotted ones, the flat faces of the tips looked shiny and slick. To the point where you could almost use them as a very small mirror.
So, has anyone with these tools had problems with cam-out with the philips or slipping with the slotted ones?
Appreciate any insight.
Sorry to drift from the Menard's deals BUT do you have a Pepsi/Coke Bottling plant anywhere near you? If so, they sell/give away the used barrels that the syrup comes in. Might be worth checking....
logixjock
Well-known member
Hope this is the proper place to ask this.
I was in Menards yesterday, looking at the basic MF screwdrivers. The acetate handled ones. I've seen other posters on here say they like them, so I hope to get some answers here.
Anyway, I noticed they do not seem to have any sort of "gripping" feature on the tips. No grooving or "roughing" on the surfaces. In particular the philips of various sizes and the slotted 3/16's and 1/4X4" ones. In the case of the slotted ones, the flat faces of the tips looked shiny and slick. To the point where you could almost use them as a very small mirror.
So, has anyone with these tools had problems with cam-out with the philips or slipping with the slotted ones?
Appreciate any insight.
I thought they fit the screws just fine, what I ended up not liking about them was the slick handles, a little factory grime and a hot, sweaty day = completly useless. I took them out of my carry pouch and left them at my desk.