Milwaukee Power Tools Deal Permathread

[thertel]

What's the going rate for the m12 6.0 battery lately?

 

[darkzero]

What's the going rate for the m12 6.0 battery lately?

Retail from authorized Milwaukee dealers $99. I paid $62 shipped new for mine last month.

 

[2manytools]

What's the going rate for the m12 6.0 battery lately?

Buy with a surge kit in store with free 6. Battery will ring out at ~$66.

 

[javyLSU]

Buy with a surge kit in store with free 6. Battery will ring out at ~$66.

I just happened to buy a 6.0 today, and found an even better deal... The M12 circular saw is $149 and comes with a free 6.0, which rings up at $59.48 for the battery. Walked out the door and back in to customer service, where I returned the saw and got $89.52 back.


On a related note, this deal is technically not clearance, but it is almost the clearance price I paid last year for this kit... M12 starter kit with two 3.0 CP batteries and charger for $89. I paid $79 last year on clearance...

https://www.homedepot.com/p/307387577

I wound up selling the M12 charger for $15 to make the total price even lower...

 

[MrSurly]

I just happened to buy a 6.0 today, and found an even better deal... The M12 circular saw is $149 and comes with a free 6.0, which rings up at $59.48 for the battery. Walked out the door and back in to customer service, where I returned the saw and got $89.52 back.


On a related note, this deal is technically not clearance, but it is almost the clearance price I paid last year for this kit... M12 starter kit with two 3.0 CP batteries and charger for $89. I paid $79 last year on clearance...

https://www.homedepot.com/p/307387577

I wound up selling the M12 charger for $15 to make the total price even lower...

I’ll admit I’m slow. Please explain like I’m five.
This reads (to my mind)like you spent 150 then got 90 back.... so you paid 60 dollars for a sixty-dollar battery?
I’m missing something, for sure.


Sent from my iPhone using Tapatalk

 

[2manytools]

I’ll admit I’m slow. Please explain like I’m five.
This reads (to my mind)like you spent 150 then got 90 back.... so you paid 60 dollars for a sixty-dollar battery?
I’m missing something, for sure.


Sent from my iPhone using Tapatalk

He paid $60 for a $99 battery retail. That is the amount taken off the whole transaction.

Good catch JavyLSU. I bought a couple of the m12 circs, and that totally lapsed my mind being the better deal.

 

[Bolster]

Looks like Javy paid $60 for what HD calls a $99 battery (and what Amazon calls a $68 battery).

D'oh, cross post.

 

[MrSurly]

Looks like Javy paid $60 for what HD calls a $99 battery (and what Amazon calls a $68 battery).

D'oh, cross post.

I missed the math, thanks I see it now.
But as you said that what HD calls a 99 dollar item. It’s still a deal.


Sent from my iPhone using Tapatalk

 

[javyLSU]

Looks like Javy paid $60 for what HD calls a $99 battery (and what Amazon calls a $68 battery).

D'oh, cross post.

Correct, and I won’t have any issues with warranty should the need arise versus buying on Amazon.

 

[2manytools]

Correct, and I won’t have any issues with warranty should the need arise versus buying on Amazon.

Incorrect. Amazon is NOT an authorized Milwaukee dealer. Milwaukee will go by the date stamped on the battery, not your purchase date.

edit: I misread that. Thought you bought from Amazon.

 

[roktoy]

Incorrect. Amazon is NOT an authorized Milwaukee dealer. Milwaukee will go by the date stamped on the battery, not your purchase date.

Thought he bought at HD? Warrantee should be full there, right?

 

[2manytools]

Thought he bought at HD? Warrantee should be full there, right?

correct. i mis-read. or didn't read the word versus.

thanks for the catch.

 

[Bolster]

But with an HD purchase, you do need to keep your receipt around for warrantee service, right? And be able to FIND the receipt? I sure hope Milwaukee honors digitized receipts. My method is to take photos of important receipts and store them in the computer...but I dunno if Milwaukee would honor that...

EDIT: Footnote, somewhere I read that for non-authorized dealer purchased batteries, Milwa will go by the date stamped on the battery PLUS 6 months, assuming that the supply chain took 6 months to get the battery into your hands...

 

[2manytools]

But with an HD purchase, you do need to keep your receipt around for warrantee service, right? And be able to FIND the receipt? I sure hope Milwaukee honors digitized receipts. My method is to take photos of important receipts and store them in the computer...but I dunno if Milwaukee would honor that...

EDIT: Footnote, somewhere I read that for non-authorized dealer purchased batteries, Milwa will go by the date stamped on the battery PLUS 6 months, assuming that the supply chain took 6 months to get the battery into your hands...

Sign up for free ProXtra account. Either scan/enter phone at time of purchase, or enter online afterwards. Let home Depot organize it for you.

 

[Jamie V]

But with an HD purchase, you do need to keep your receipt around for warrantee service, right? And be able to FIND the receipt? I sure hope Milwaukee honors digitized receipts. My method is to take photos of important receipts and store them in the computer...but I dunno if Milwaukee would honor that...

With the Milwaukee one key app you can upload a picture of your receipts per tool so you have them down the road if need be.

 

[javyLSU]

But with an HD purchase, you do need to keep your receipt around for warrantee service, right? And be able to FIND the receipt? I sure hope Milwaukee honors digitized receipts. My method is to take photos of important receipts and store them in the computer...but I dunno if Milwaukee would honor that...

EDIT: Footnote, somewhere I read that for non-authorized dealer purchased batteries, Milwa will go by the date stamped on the battery PLUS 6 months, assuming that the supply chain took 6 months to get the battery into your hands...

All of my purchases are automatically recorded on my ProXtra account because I registered the cards I’ve used to buy them. I usually use my HD card anyway, so I can look up any purchase I’ve ever made at HD, and they save the receipts. That’s in addition to my getting an emailed copy of the receipt at the time of purchase.

 

[thertel]

Wound up snagging 4 of the 6.0ah batteries off ebay for $180, all December 2019 date coded batteries. Talk about night and day difference on some of the tools.

 

[MrSurly]

All of my purchases are automatically recorded on my ProXtra account because I registered the cards I’ve used to buy them. I usually use my HD card anyway, so I can look up any purchase I’ve ever made at HD, and they save the receipts. That’s in addition to my getting an emailed copy of the receipt at the time of purchase.

At Lowe’s I use the My Lowes card to track my purchases and provide receipts. At HD, when I check out, the register gives me the option to get an emailed receipt, and that is a good way to have the record. It recognizes the CC I usually use, and has my email on the screen already.
I find it very handy



Sent from my iPhone using Tapatalk

 

[61scout80]

Looking to add the M18 dual power to my pile o' red tools. Is the Ace deal for $199 that comes w/ a 5AH battery currently the best deal?

 

[BroncoAZ]

I was missing a promo M12 6.0 battery from Acme Tools for the M12 Fuel Hackzall I ordered in November. I emailed them over the weekend and they sent me a shipping notice this morning. Great customer service on their part when I notified them of the error.

 

[ren71]

Inflator with charger and 4.0 battery for $99 at Summit.

Summit is very reputable for those unfamiliar.

https://www.summitracing.com/parts/mwt-2475-21xc

 

[Caparris]

Good price. I Wish I had bought mine sooner.

 

[Iowadriver]

There been any included batteries with the m12 or m18 rocket lights/tower light? HD I thought had them but I looked yesterday with no luck.


Sent from my iPhone using Tapatalk

 

[ThatSickRip]

There been any included batteries with the m12 or m18 rocket lights/tower light? HD I thought had them but I looked yesterday with no luck.


Sent from my iPhone using Tapatalk

They had them back in December. Got my M18 2131 for $96.85 after returning the 5.0 starter pack.

I dont see them on their site anymore either. And its looks like the price went from $199 to $229 there as well

 

[Iowadriver]

They had them back in December. Got my M18 2131 for $96.85 after returning the 5.0 starter pack.



I dont see them on their site anymore either. And its looks like the price went from $199 to $229 there as well

Dang!


Sent from my iPhone using Tapatalk

 

[ren71]

M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Deep Cut Band Saw with Free M18 FUEL 4-1/2 in./5 in. Grinder. Home Depot $300



I wish there was an easy way to split this, I don't really need the grinder.
I tried adding to cart as separate bare tools for in store pickup (has worked on some combos in the past), but no go on the prorate discount.

https://www.homedepot.com/p/Milwaukee-M18-FUEL-18-Volt-Lithium-Ion-Brushless-Cordless-Deep-Cut-Band-Saw-with-Free-M18-FUEL-4-1-2-in-5-in-Grinder-2729-20-2780-20/312175385

 

[pizza]

Inflator with charger and 4.0 battery for $99 at Summit.

Summit is very reputable for those unfamiliar.

https://www.summitracing.com/parts/mwt-2475-21xc

i notice it has a presta adapter included. anyone use this on bicycle tires before? a road bike perhaps?
wondering about pressure accuracy, especially considering low tire volume.

 

[DFB]

i notice it has a presta adapter included. anyone use this on bicycle tires before? a road bike perhaps?
wondering about pressure accuracy, especially considering low tire volume.

Removing the screw on type valve connector that comes standard with the little pump after inflation can be a slight hindrance. Guess it all depends on how quick you can do it

A lot of people add this Hose Adapter. I did

https://www.autozone.com/air-tools-...id=2307689954&ppjmid=43737&cmpid=ppjmid:43737

 

[ksarauer]

M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Deep Cut Band Saw with Free M18 FUEL 4-1/2 in./5 in. Grinder. Home Depot $300



I wish there was an easy way to split this, I don't really need the grinder.
I tried adding to cart as separate bare tools for in store pickup (has worked on some combos in the past), but no go on the prorate discount.

https://www.homedepot.com/p/Milwaukee-M18-FUEL-18-Volt-Lithium-Ion-Brushless-Cordless-Deep-Cut-Band-Saw-with-Free-M18-FUEL-4-1-2-in-5-in-Grinder-2729-20-2780-20/312175385

I've been waiting for deals on both these items, Perfect!!
Only problem is it's online only and they are sold out... Any idea how I can get this deal still?

 

[Black300zx]

There been any included batteries with the m12 or m18 rocket lights/tower light? HD I thought had them but I looked yesterday with no luck.


Sent from my iPhone using Tapatalk

Your friend has shared a link to a Home Depot product they think you would be interested in seeing:

Milwaukee M12 12-Volt Lithium-Ion Cordless 1400 Lumen ROCKET LED Stand Work Light with Free M12 4.0 Ah Battery
https://www.homedepot.com/p/Milwauk...2-4-0-Ah-Battery-2132-20-48-11-2440/312182278

 

[superskaterxes]

Anyone have any new m12 batteries they're looking to get rid of? Pref 4ah if possible. Send me a pm.

 

[visiter555]

My local (Winnipeg Canada) HD has finally started to mark down the Black Friday work benches. Not great deals but a little lower that they were.

Husky 52in 9 DRW Mobile Work Centre was $498 now $398 (CANADIAN)

Husky 46" 9DRW Black Mobile Work Centre was $398 now $275 (CANADIAN)

Milwaukee 48-22-8544A was $598 now $498 (CANADIAN)



Then they marked down the Milwaukee 8 1/4" 736-21HD was $799 now $599 (CANADIAN)

 

[ren71]

I've been waiting for deals on both these items, Perfect!!
Only problem is it's online only and they are sold out... Any idea how I can get this deal still?

Heads up, back in stock online.

 

[Crabman]

Bunch of Milwaukee (and DeWalt) on HD special buy of the day.

Not sure how good the deals are.

https://www.homedepot.com/SpecialBu...203_sbotd_3552696-_-VA_SBOTD&et_rid=236843504

 

[DFB]

Tool Barn has a series of M12 FUEL tools at 10% off each

https://www.toolbarn.com/shop-by-ca...4483&l=2742_HTML&u=6195174&mid=100029924&jb=0


Stubby Impact Wrench "KITS" have a 6.0XC battery as an add on bonus with purchase


https://www.toolbarn.com/shop-by-ca...4483&l=2742_HTML&u=6195175&mid=100029924&jb=0


There are a series of other promos going on right now also... like buy a M18 SDS Rotary Hammer Kit get a M18 Fuel Grinder

https://www.toolbarn.com/specials/?...4483&l=2742_HTML&u=6195176&mid=100029924&jb=0

 

[Black300zx]

^^ Home depot also has M12 stubby kits w/ the free 6.0 for the same price.

 

[BMack37]

Friday I found a couple M12 inflators with 2.0 battery and power source (From the holiday sale) for $79...they had not dropped at this store previously so if you had any stores where those didn't drop and still had stock, might be worth checking again.

 

[gamp945]

Friday I found a couple M12 inflators with 2.0 battery and power source (From the holiday sale) for $79...they had not dropped at this store previously so if you had any stores where those didn't drop and still had stock, might be worth checking again.

I think the Internet number for this is: 309745291

No longer appears on the website.

 

[Jimmyb]

Not sure if this is a good deal or not but I am interested in getting the m12 inflator.

Internet number 312364858
Model # 2463-21rs




Sent from my iPhone using The Garage Journal mobile app

 

[2manytools]

Not sure if this is a good deal or not but I am interested in getting the m12 inflator.

Internet number 312364858
Model # 2463-21rs




Sent from my iPhone using The Garage Journal mobile app

Some HDs still have the inflator kit from the holidays, and is down to $79. It comes with a 2ah, and the USB power source/charger.

I've owned that 3/8" impact, and I'm glad I got rid of it. My M12 Fuel Gen2 could do the same with an adapter, a little less due to the adapter, but they are both rated at 1,200 in lbs. It's is also sort of large now too, compared to other offerings.

and WHY are they including chrome sockets with an impact? poor example setting