My Fab Shop
- Thread starter 35mastr
- Start date
ForceFed70
Well-known member
Looks great. I am surprised that you are allowed to place it so close to the fence line.
We have a 6' min setback in my area.
We have a 6' min setback in my area.
jtbinvalrico
Well-known member
Nice job. Can you post some pix of your tool setup, lighting, electric, air, etc in there? I always learn something by seeing how other guys set up their gear.
John in OH
Well-known member
That looks really nice! I like the colors as they look great together.
What did you do at the interface between the metal roof panels and the T-111 sidewalls? It appears that you have some sort of finish strip between the two ... is it a Z strip of some sort? A close-up photo showing how you made this interface would be very helpful.
What did you do at the interface between the metal roof panels and the T-111 sidewalls? It appears that you have some sort of finish strip between the two ... is it a Z strip of some sort? A close-up photo showing how you made this interface would be very helpful.
We have a 5 foot set back here also on that fence line. But I have real good neighbors.
Its just the regular Z bar that you would use when stacking the T1-111. I just backed out the screws for the roof an slippped it under there and built off that that. It worked out perfect.
Well no pic's of all the tools so far. But its a 60 amp service that runs a blast cabinet,2 T-5 4 bulb lights, Got 4 20 amp receptible plugs every 5 feet all run in 3/4 conduit,2 welder plugs, 1 for my mig and 1 for my Tig. 60 Gal. IR 2 Stage Compressor. Band Saw,Plasma Cutter,Ect.
And before the code guys come out. Every thing has its own breaker and they only are turned on when in use. I dont run eveything at the same time.
I ran all this eqipment in the adjasint shed 12x16 before I built this shop on this same power without any issues.
It all works just fine. Is it the right way to do it. "Hell No". But if you are real careful you can make do with it.
Everything is run off of a 100 amp Main 20 circuit box. With the 100 amp being the main. Code here will allow the 100 amp main as a disconect for my 60 amps coming in.
When I have the house updated to 200 amps I will run 100 out to the shop.
Beaumont67
Well-known member
Very nice CUSTOM look 35mastr - clever use of vertical wood siding.
- closing in the car port, the way you did - looks rich / the door choice, was money well spent
------------------------------------------------
Beaumont { :>)) www.petperfectexpress.com
1965 Malibu S/S, 1966 Beaumont Custom original paint, 1967 Beaumont Custom, 1967 Beaumont Custom original paint, 1967 Beaumont 396-350HP Sport Deluxe M21-411's - SOLD 1970 Judge
It was a 350. There now is a 304CI full race flathead with 4 pots on the top now.
Mmfh
MEMBER EMERITUS
You do nice work! Did you do the paint work in that shop??
Great taste in cars. Pretty cool shop too!
Mm
Great taste in cars. Pretty cool shop too!
Mm
Found this thread from the small 10 X 20 carport thread. You do some really nice work- I would like to see how this project came out!