To avoid these ads, REGISTER NOW!

Need help finding a 21mm torque adapter

D

decableguy2000

Well-known member
Joined
Nov 4, 2012
Messages
650
Need to find a 21mm torque adaptor or some other way to torque a nut that I can't get a socket and the head of the torque wrench on not enough clearance. Can get a box end wrench on it all day. I'm having a hard time finding metric over 19mm.
 
To avoid these ads, REGISTER NOW!
S

Sumboodie

Well-known member
Joined
Mar 20, 2021
Messages
10,656
Location
AK
I generally just use the calibrated elbow on those oddball things. Sure if it really mattered or needed to do lots of them I'd look into a tool.
 
OP
D

decableguy2000

Well-known member
Joined
Nov 4, 2012
Messages
650
Don't have any crowfoot wrenches. I found the Snap-On but its a one time maybe 2 time use. I will see if I can find a crowfoot one locally.
 
D

dnschmidt

Well-known member
Joined
Oct 3, 2014
Messages
7,261
Location
Phoenix, AZ
What type of torque wrench do you have? I have interchangeable head torque wrenches for this purpose. In Europe this is a very common type of torque wrench. 99% of the time you use the ratchet head but for situations like you're suggesting the ability to put an open end wrench head or a box wrench head on the torque wrench is a great benefit. Capri sells the heads. Why Americans don't use interchangeable head torque wrenches has always been a mystery to me.
 
Last edited:
W

WWheeler

Well-known member
Joined
Jun 23, 2015
Messages
4,105
Location
Middleofnowhere USA
Moose-LandTran said:
Snap-on FRDHM21

Snap-on Store

shop.snapon.com shop.snapon.com
Click to expand...
cheaper crowsfoot alternatives (if you don't find one locally)

3/8dr


1/2dr

1/2-Inch Drive Deluex Metric Crowfoot Flare Nut Wrench Tool BY JTC 1925 (21MM) - - Amazon.com

1/2-Inch Drive Deluex Metric Crowfoot Flare Nut Wrench Tool BY JTC 1925 (21MM) - - Amazon.com
www.amazon.com
 
H

HVAC Study

Member
Joined
Dec 19, 2021
Messages
21
dnschmidt said:
What type of torque wrench do you have? I have interchangeable head torque wrenches for this purpose. In Europe this is a very common type of torque wrench. 99% of the time you use the ratchet head but for situations like you're suggesting the ability to put an open end wrench head or a box wrench head on the torque wrench is a great benefit. Capri sells the heads. Why Americans don't use interchangeable head torque wrenches has always been a mystery to me.
Click to expand...
We do have them but at the moment I believe they are mostly used in refrigeration and or hydraulics. I saw them become more popular with the increasing popularity of mini split systems which are all imported to the USA

I figured he wanted a less expensive option and if he has room for a crow foot it may be cheaper or he could get a whole set and have them for another time. Versatility
 
R

rpcraft

Well-known member
Joined
Aug 14, 2014
Messages
1,057
Location
Waco
for one 21MM crowfoot tool I would check amazon, ebay, Grainger, Mcmaster, and maybe Northern tool if they have a store in your area. I doubt they will have one in store, but they are kind of my go to for filling in single sockets out of my 3/4 impacts and similar skip sizes in various kits I have purchased.
 
OP
D

decableguy2000

Well-known member
Joined
Nov 4, 2012
Messages
650
Ordered a Tekton crow foot. Just can't justify the Snap-on, Proto no metric, Matco 19mm biggest, no odd brands on Ebay. May go to the pawn shop and get a cheap wrench to modify. Waiting on parts anyway.
 
To avoid these ads, REGISTER NOW!
O

old_smokey

Well-known member
Joined
May 16, 2018
Messages
409
Location
Manitoba
Ricky Joe said:
Make one
Click to expand...
Was just going to say the same!

I was in the same situation this past weekend. I rebuilt a motor, dropped it in the frame, and realized I didn't torque a critical bolt which was now obstructed by a frame rail.

A sacrificial wrench was cut down and welded to a socket. Presto, I had my torque adapter. Keep the adapter short, maybe 2" max, and at 90 degrees to your torque wrench, and you don't have to adjust the torque spec.

It took longer to fire up the welder than it did to make the adapter and torque the fastener!
 
OP
D

decableguy2000

Well-known member
Joined
Nov 4, 2012
Messages
650
old_smokey said:
Was just going to say the same!

I was in the same situation this past weekend. I rebuilt a motor, dropped it in the frame, and realized I didn't torque a critical bolt which was now obstructed by a frame rail.

A sacrificial wrench was cut down and welded to a socket. Presto, I had my torque adapter. Keep the adapter short, maybe 2" max, and at 90 degrees to your torque wrench, and you don't have to adjust the torque spec.

It took longer to fire up the welder than it did to make the adapter and torque the fastener!
Click to expand...
I would like to see a picture if possible
 
U

unslow1

Well-known member
Joined
Mar 3, 2012
Messages
7,879
Location
Illinois
old_smokey said:
Was just going to say the same!

I was in the same situation this past weekend. I rebuilt a motor, dropped it in the frame, and realized I didn't torque a critical bolt which was now obstructed by a frame rail.

A sacrificial wrench was cut down and welded to a socket. Presto, I had my torque adapter. Keep the adapter short, maybe 2" max, and at 90 degrees to your torque wrench, and you don't have to adjust the torque spec.

It took longer to fire up the welder than it did to make the adapter and torque the fastener!
Click to expand...
I have a couple of those from my grandfather's collection of improvised tools.
 
S

Squankum

Well-known member
Joined
Mar 28, 2011
Messages
7,647
Location
Southeast
There are things like this that you clamp a wrench into, and they're not cheap, considering how simple they are.

1655266078437.png

Motion Pro 08-0380 Adjustable Torque Wrench Adapter​



I was going to say "assuming you have loads of room for the rest of the wrench", but if you have a stubby wrench set, not so much! These also give you the option of open end or box.

I'm pondering getting one of these but it won't stop me from wanting torque adapters, too.
 
OP
D

decableguy2000

Well-known member
Joined
Nov 4, 2012
Messages
650
Funny end to the story. I actually needed a 22mm. Ordered and returned Tekton crows foot. I ended up giving the good and tight with a long box end wrench.
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom