New Plier Rack

[matts65ss]

Thanks for all the love everyone Im having a blast knocking these out for you guys!

Just so you all know. I'm going to give it hell to catch up to all the replies. A little later tonight I will be going through the entire thread and posting up batch 4 5 6 and 7 of were there yet!

Thanks
Matt

Sent from my SCH-I545 using Tapatalk

 

[Nader]

It's great watching this effort succeed. Please add me for a single rack in red. Thanks!

 

[tjpavlov]

Are these usable in any of the shallower drawers in the HF44? Has anybody tried this? Can you upload a picture? Thanks!

 

[matts65ss]

Are these usable in any of the shallower drawers in the HF44? Has anybody tried this? Can you upload a picture? Thanks!

They sure do brotha!



Sent from my SCH-I545 using Tapatalk

 

[franzdom]

I need one of these!

 

[Steve in Louisiana]

I need a set in "BLACK" also.

PM me with PAYPAL payment info or what ever payment method you are using.

Also, just curious, what is the method, make & model of the machine you use to make these? Are you bending each wire & then welding?

I can see where this could be used as custom cable separators. They build a lot of instrumentation cabinets in my area.

Thanks in advance,
Steve

 

[bahcoswed]

With risk for people starting to hate me It Looks great, but what its the difference between this and a plate rack? They look very similar if you has seen my regular plate rack

 

[texasfiremedic]

Am I still in for a one in green? Need new list.

 

[matts65ss]

Am I still in for a one in green? Need new list.

After I get caught up with all the black I will be running a set of green!

Sent from my SCH-I545 using Tapatalk

 

[matts65ss]

I need a set in "BLACK" also.

PM me with PAYPAL payment info or what ever payment method you are using.

Also, just curious, what is the method, make & model of the machine you use to make these? Are you bending each wire & then welding?

I can see where this could be used as custom cable separators. They build a lot of instrumentation cabinets in my area.

Thanks in advance,
Steve

Hey steve!
In The first batch each wire was bent on a di acro number 2 bender then welded individually. From now on They are made from 20ft lengths of wire to start. They are cut to size then spot welded with an automated 40kva acme in a jig to make the flat. Then press broken 4 times with a 140 ton hydraulic amada press break. Hope that helps. Just don't start making them and under cutting me! Haha

Matt

Sent from my SCH-I545 using Tapatalk

 

[powertrip]

This is just an idea Matt. Advertise/list the price and dimensions in a signature line at the end of all of your posts. I think the price has only been mentioned a couple of times in 15 pages. Makes it easier for someone than searching through all the posts.

 

[matts65ss]

Here we go everyone! I'm just as excited as you are!

Batch 4
1. Czgunner
2. Sayoda
3. Sayoda
4. Drsung
5. D3ad1ysp0rk
6. Fcvapor05
7. Jes_si
8. Saltfuture
9. Harleybuilder
10. Mjs128

Sent from my SCH-I545 using Tapatalk

 

[Junkman]

Can't wait to see what list I will be making it onto. At my age, I can't wait too long... Black, red, or Orange all work for me.

 

[matts65ss]

Batch 5
1. Swright255
2. LiveWire64 no powdercoat
3. ShadowRuleZ
4. SeanConklin
5. Sdavis622
6. Senator52 two sets to Australia
7. CGarcia
8. Boomer12831
9. TMcClay
10. Qrazy

Sent from my SCH-I545 using Tapatalk

 

[matts65ss]

Batch 6
1. HaroRider
2. Paigej
3. Justtools
4. Justtools
5. Flyingtpot
6. Flyingtpot
7. Apong23
8. Zippercat
9. Elgato3
10. Elgato3
11. Elgato3

Sent from my SCH-I545 using Tapatalk

 

[matts65ss]

Batch 7
1. BellyUpFish
2. BellyUpFish ?
3. Great White tj
4. Thru-hika
5. Iahsatcs
6. Iahsatcs
7. Iahsatcs
8. Iahsatcs
9. Diggerdanh
10. K-os
11. K-os

Sent from my SCH-I545 using Tapatalk

 

[matts65ss]

Batch 8
1. Markw365
2. GarageDog
3. Rmscs
4. Rmscs
5. Ahicksv (2 SETS)
6. Junkman
7. BreeStephany
8. BreeStephany
9. RCL
10. Spudland_Dave
11. Spudland_Dave


Sent from my SCH-I545 using Tapatalk

 

[matts65ss]

Batch 9
1. Gearhead1
2. Passinthru
3. Passinthru
4. Nick Danger
5. Shootingdad2
6. Shootingdad2
7. Plex
8. Plex
9. HICKS
10. Mdr

Sent from my SCH-I545 using Tapatalk

 

[matts65ss]

Batch 10
1. Christianlopez
2. Justme-
3. Franzdom
4. Steve in Louisiana
5. Steve in Louisiana
6. Gipraw
7. Gipraw
8. Iajonesy
9. Iajonesy
10. CoyoteKyle (3 sets)

Holy Smokes were all caught up for lists!

I'm very Excited I have a ton of work to get done!

Sent from my SCH-I545 using Tapatalk

 

[RCStocker]

Nothing more than a mini dish drying rack and they make them almost that small. I have way to many pliers to waste that much space in a drawer for them. I would need a tool box dedicated to pliers if I used these racks. I have over 120 pairs in different drawers. I don't want to grab the business end of a piers. I want to grab the handle. They are backwards for my liking.

What do I know. I spent 2 years in design school.

 

[matts65ss]

6 more orders and we have reached 100!!!!
I owe this all to you guys! Thank you so much for all the supportive and encouraging PMs and replys with all the positive criticism and ideas for the racks!

matt

 

[SeanConklin]

Nothing more than a mini dish drying rack and they make them almost that small. I have way to many pliers to waste that much space in a drawer for them. I would need a tool box dedicated to pliers if I used these racks. I have over 120 pairs in different drawers. I don't want to grab the business end of a piers. I want to grab the handle. They are backwards for my liking.

What do I know. I spent 2 years in design school.

I could be out of line here, but I have a few questions. Why did you feel the need to discredit the worthiness of this USA made product, produced by a member of our beloved forum? Why did you feel the need to mention your "120" pairs of pliers as if we are not worthy of your internet presence? Why did you feel the need to highlight your education in "design" despite your grammar being atrocious?

If the racks are not to your liking simply go back to the forum and find something you DO approve of. Thank You

Matt, I apologize for hijacking your thread and with your approval, would still like to purchase a set of racks. Please PM me your PayPal information at your convenience and I will be proud to show them off. Thank You again and congratulations on your success!

 

[Junkman]

Matt... any idea of how long it will take you to get caught up? thanks Junkman

 

[matts65ss]

Hey Junkman. I'm going put in some serious work to get caught up here because I don't want to keep people that want custom colors waiting for a long time. I will be posting on the thread daily with my progress. I don't want to give you an exact date but I'm shooting for at LEAST a batch a day starting monday!

Sent from my SCH-I545 using Tapatalk

 

[matts65ss]

This is just an idea Matt. Advertise/list the price and dimensions in a signature line at the end of all of your posts. I think the price has only been mentioned a couple of times in 15 pages. Makes it easier for someone than searching through all the posts.

Brilliant man thanks. As you can see I have added a signature as well as updated the first post with current pictures and all the information


Sent from my SCH-I545 using Tapatalk

 

[Steve in Louisiana]

Nothing more than a mini dish drying rack and they make them almost that small. I have way to many pliers to waste that much space in a drawer for them. I would need a tool box dedicated to pliers if I used these racks. I have over 120 pairs in different drawers. I don't want to grab the business end of a piers. I want to grab the handle. They are backwards for my liking.

What do I know. I spent 2 years in design school.

Hello Matt, please up me to (2) two sets instead of (1) set. Buddy in CA saw them and said please get me a set. . . I'll pay for his and supply you with his shipping info in Oxnard, CA at same time I provide mine. "You Have An Excellent Product" . .

Thanks in advance,
Steve

 

[matts65ss]

Hello Matt, please up me to (2) two sets instead of (1) set. Buddy in CA saw them and said please get me a set. . . I'll pay for his and supply you with his shipping info in Oxnard, CA at same time I provide mine. "You Have An Excellent Product" . .

Thanks in advance,
Steve

Got it. Thanks so much

Sent from my SCH-I545 using Tapatalk

 

[harleybuilder]

Matt, Pm me your paypal address when your ready for my payment (Batch 4 list)
Thanks

 

[matts65ss]

Will do

Sent from my SCH-I545 using Tapatalk

 

[flyingtpot]

Batch 6
1. HaroRider
2. Paigej
3. Justtools
4. Justtools
5. Flyingtpot
6. Flyingtpot
7. Apong23
8. Zippercat
9. Elgato3
10. Elgato3
11. Elgato3

Sent from my SCH-I545 using Tapatalk

Matt,

I'm on batch six! That is nice!

The issue is the racks are expensive. Well, actually the filling of the racks is expensive.

• • First I picked up a plier set from the local Snappy driver.
  • Then I placed a good size order of Knipex pliers from German Hand-Tools.
  • Then last Friday a single Snappy score from my out-town-Snappy Driver.
  • Tomorrow a pair of pliers from the out-of-town Snappy driver.
  • Next Monday a single plier score from the local Snappy driver.

Honestly, those plier racks were inspiring to me to do a long overdue pliers upgrade.

Thanks,
Carl

 

[jes_si]

Congrats on getting to batch #10.

Please PM me your paypal info when your ready. Im on batch #4.

 

[toolj]

Did we get a price for international shipping?

 

[matts65ss]

Did we get a price for international shipping?

I have pricing for Canada and Australia. . Where would you need them sent?

Sent from my SCH-I545 using Tapatalk

 

[TMcCay]

Matt,
I am on batch #5. PM me with your paypal info when you are ready.
Thanks,
Terry

 

[toolj]

I have pricing for Canada and Australia. . Where would you need them sent?

Sent from my SCH-I545 using Tapatalk

England
And how does shipping work for more than one set?

 

[Jim C.]

Nothing more than a mini dish drying rack and they make them almost that small. I have way to many pliers to waste that much space in a drawer for them. I would need a tool box dedicated to pliers if I used these racks. I have over 120 pairs in different drawers. I don't want to grab the business end of a piers. I want to grab the handle. They are backwards for my liking.

What do I know. I spent 2 years in design school.

You know, based on this and so many of your prior posts, it seems that you know just about everything. You've certainly turned bragging into a science.

 

[matts65ss]

England
And how does shipping work for more than one set?

25 per set and you pay the shipping cost

Sent from my SCH-I545 using Tapatalk

 

[gipraw]

Add me to the list for two sets. I'd prefer Orange, but if that is too long of a wait then black will do just fine.

 

[matts65ss]

Add me to the list for two sets. I'd prefer Orange, but if that is too long of a wait then black will do just fine.

I'll add you for black. I'll be doing green, then red, and if any more interest orange

Sent from my SCH-I545 using Tapatalk

 

[iajonesy]

Hey,Matt,
I've PM'd you a couple times but never heard back,so I'll do it this way. I'd like 2 sets any color or no color is okay ,too.I didn't see my name on any of the batch lists so I hope this doesn't screw things up. Man you have built yourself quite a little business,keep it up and you might have to go on "Shark Tank" to buid a factory. Good luck.

Mike