To avoid these ads, REGISTER NOW!

Old Craftsman Set

To avoid these ads, REGISTER NOW!
J

jask

Well-known member
Joined
Jul 4, 2009
Messages
314
Location
Gods Country, B.C.
all good now..

oh yeah... those things are JUNK, send them to me and I will send you some nice shiney harbour freight tools
 
Last edited:
T

thehorse13

Well-known member
Joined
Mar 15, 2015
Messages
3,482
Location
Jefferson County, WV
It's a beautiful set. The smallest sockets sure have lived a full life though. Someone really got a lot of use out of them by the looks of the socket points.
 
OP
3

3baygarage

Well-known member
Joined
Sep 1, 2013
Messages
12,004
Location
SW Florida/from Buffalo,NY
It is a beauty. I have to say I was surprised by how used the small sockets are. The seller was honest in saying they were too.

Now I have to find the extension(s). It may have only come with a 6" like I saw in another set but not sure. That extension was unmarked as is the T bar in both sets.
 
O

Outlawmws

Well-known member
Joined
Aug 9, 2011
Messages
39,365
Location
The Badlands
you needed to starter this thread off with "I was just driving over to Harbor freight and happened across a yardsale with these crappy old tools...."

;)
 
E

Empty Pockets

Well-known member
Joined
Sep 21, 2015
Messages
4,942
Location
Rural New York
If you were serious about swapping for PRC stuff, I would have driven over from Rochester area and swapped for new Chinese imports....Nice set
 
To avoid these ads, REGISTER NOW!
G

Gear Wolf

Well-known member
Joined
Feb 25, 2015
Messages
567
If you ever need a buyer for the set look me up. I need that 3/8" ratchet for my ratchet history series. ^_^

Great find in great condition!

I am curious to know if you think the ratchet can be serviced at all.
 
R

Rileysan

Well-known member
Joined
Sep 11, 2015
Messages
4,298
Location
Milwaukie, Oregon
Dr. Doom said:
If you ever need a buyer for the set look me up. I need that 3/8" ratchet for my ratchet history series. ^_^

Great find in great condition!

I am curious to know if you think the ratchet can be serviced at all.
Click to expand...

All the evidence I need to know that this is a rare set!

Great find, 3bay! Am green with envy!

Brian
 
W

woody 73

Well-known member
Joined
Apr 14, 2009
Messages
11,554
Location
The Great State Up North
3 bay very nice set. :thumbup::thumbup:

True story no joke but maybe about two or three years ago as the crow flies, I was standing in line waiting to buy something at Sears and an old codger like myself walked in with a bag full of very old tools and he was demanding all brand new tools (Chinese made) in exchange.

When he walked out the employees were pissed and mad as hell; so myself and one other customer asked "So what gives why are you guys so upset?"
At which time they all said old (make up a name________) Geezer Bob does this all the time so we only let him exchange so many tools every day; They went on too say...

"He goes to flea type places and buys up all the old broken tools returns them for new and then sells them for a profit"; as you guys can imagine this is an od story as you guys have heard it before now. But the tools that I saw him bring in were indeed very old.

Old Geezer Bob where are you finding all that old Craftsman Gold ???
 
OP
3

3baygarage

Well-known member
Joined
Sep 1, 2013
Messages
12,004
Location
SW Florida/from Buffalo,NY
Doom- it is definitely non serviceable, doesn't open. Silent too because no gears! Must be some type of clutch mech. If you ever had your hands on a Blackhawk Freewheeling you'll know what I mean.

Woody- I picked up a C series speeder today. There's lots of cool stuff out there, just never know when it will appear.
 
G

Gear Wolf

Well-known member
Joined
Feb 25, 2015
Messages
567
3baygarage said:
Doom- it is definitely non serviceable, doesn't open. Silent too because no gears! Must be some type of clutch mech. If you ever had your hands on a Blackhawk Freewheeling you'll know what I mean.

Woody- I picked up a C series speeder today. There's lots of cool stuff out there, just never know when it will appear.
Click to expand...

Hmmm, that is unfortunate. I would love to get a hold of two, so I could perform an autopsy on the "lesser" condition piece.

Do you suppose the retention plates on the top and bottom are press fit?
 
P

Private Lugnutz

Well-known member
Joined
Mar 30, 2012
Messages
30,775
Location
The Authentic Jersey Shore
Very nice, 3bay.

For my own edification, what's the story on the handles and extensions having the geometric C underline Craftsman logo but the sockets not? (I am not challenging the integrity of the set - I just don't know much about pre-war Vanadium Craftsman.) Reason I ask is, the logo type on the wartime Circle-H and BE handles, extensions, and sockets are all matching.
 
OP
3

3baygarage

Well-known member
Joined
Sep 1, 2013
Messages
12,004
Location
SW Florida/from Buffalo,NY
Dr. Doom said:
Hmmm, that is unfortunate. I would love to get a hold of two, so I could perform an autopsy on the "lesser" condition piece.

Do you suppose the retention plates on the top and bottom are press fit?
Click to expand...

I do believe so.

Thanks all.

BMAN It certainly is one of the most unique and cool looking grips when it comes to ratchets.

Private Lugz The sockets are correct, they are the same as Hinsdale of the era. I have no idea why it isn't the long C though. Don't know why the tbar and extension wouldn't have been stamped either. Probably cost related and matching pieces was not a priority :dunno: .
 
O

Outlawmws

Well-known member
Joined
Aug 9, 2011
Messages
39,365
Location
The Badlands
3Bay, is there a "makers mark" on the ratchet or other long C marked tools? that would be something to add to the "makers mark" tables for Craftsman...
 
C

CRTDI

Well-known member
Joined
Jan 11, 2010
Messages
1,533
WOW!!...3bay, this is certainly a set you don't see every day. Very, very nice...:drool:

I picked up a ratchet a while back thinking that it might be an older Craftsman like the one in this set. Same handle pattern, but it has a different style head and some sort of external spring loaded engagement/selector/release mechanism...not really sure of the function..:dunno: ,a hollow open ended handle, definitely an early Freewheeling design, but no maker marks that I can see. I'll post a pic a little later.
 
OP
3

3baygarage

Well-known member
Joined
Sep 1, 2013
Messages
12,004
Location
SW Florida/from Buffalo,NY
CRTDI, I know the ratchet you speak of. Has that stem that pops out the head right?Pretty sure what you have is a Hinsdale made ratchet, or so I've thought. I saw one posted somewhere not long ago. Maybe yours?

Guys, I will take a closer look but as far as I know, there are no other stampings and everything is consistent with Hinsdale.
 
C

CRTDI

Well-known member
Joined
Jan 11, 2010
Messages
1,533
I believe this is the same one that you're thinking of.
 

Attachments

  • IMG_9668.jpg
    IMG_9668.jpg
    154.6 KB · Views: 99
  • IMG_9674.jpg
    IMG_9674.jpg
    161.1 KB · Views: 89
  • IMG_9676.jpg
    IMG_9676.jpg
    164.5 KB · Views: 86
  • IMG_9675.jpg
    IMG_9675.jpg
    156 KB · Views: 99
T

twertsy

Well-known member
Joined
Jan 5, 2014
Messages
6,726
Location
Reedville, VA
I will just say that the broaches on the Craftsman and the Hinsdale examples are worlds apart.................
 
D

drivesitfar

Well-known member
Joined
Oct 23, 2013
Messages
36,092
Location
Pacific Northwest
3Bay: i own a fair share of old Craftsman hand tools and tool boxes of all sorts and sizes and that might be the first tool box i've seen with the raised area and hole for the ratchet to set in. nice find

sounds like you have a couple buyers with cash and a few guys anxious to trade you some shiny new ones to trade for it. :evil:
 
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom