To avoid these ads, REGISTER NOW!

plumbing help...shower diverter

holland_patrick

Well-known member
Joined
Jan 9, 2005
Messages
826
Location
hartford ct
I have brand new out of the box Moen boardwalk shower set.

http://www.moen.com/boardwalk/spot-...osi-temp-r-tub-shower/_/R-CONSUMER:82835EPSRN


first time out of the box in stalled right the hot water side would only dribble out

pull the cartridge and both the hot and cold side flowed fine.

got a replacement cartridge (had to pay for it)

this time the cold side would only dribble out...

could I have gotten two bad ones???

Frank the plumber looking to you man....

patrick
 
To avoid these ads, REGISTER NOW!
To avoid these ads, REGISTER NOW!

plumbstupid

Well-known member
Joined
Jul 21, 2010
Messages
142
Location
arkansas
It sounds like it the tempature limit may be in wrong. It should be the white piece that slips over the cartridge and under the handle. Try the valve without it, then check the instructions and how to adjust it. I install a few moens a year. I know how to do it but I doubt I could explain it.
 
OP
H

holland_patrick

Well-known member
Joined
Jan 9, 2005
Messages
826
Location
hartford ct
yes the cart was in correctly. and the hot and cold on all the way...

we did not have the limiter on yet we were double checking the sweats and don't have the wall on yet so it's open to the studs we just slipped the handle on to open the valve..
 
To avoid these ads, REGISTER NOW!
Top Bottom