To avoid these ads, REGISTER NOW!

Protecting generator from rain/snow during use

Mainiac Mat

Well-known member
Joined
Sep 2, 2020
Messages
402
Location
Maine
Hey gang,

I finally got sick of fiddling with and babysitting my fickle 29 y.o. Coleman 5KW (peak) generator every time we lose power and upgraded to a new Champion 9KW (peak), open frame, Tri-Fuel, electric start, invertor generator.

1701891479809.png

For now, I'll keep connecting to the house via. a 30 amp, 220v, 6 circuit GenTran box with a twist lock plug, but I ordered a 40 gal. LPG tank and plan on mounting it to an old Harbor Freight mover's dolly, and hope to avoid ever putting any gas in the new genny.

The idea is to be able to run >12 hours continuously without fiddling with the generator. But in doing so, I'd prefer to not have the generator sitting in the pouring rain or snow.

So my question to the forum is, how do you keep the rain and snow off your genny while it's running?

Ideas so far are to:
  • make a bracket to mount an oversized golfer's umbrella to the generator frame.
  • make an vented/open sided "doghouse" with a pallet base and move it around with my tractor forks.
  • zip tie a plastic panel over the top of the generator fuel tank
 
To avoid these ads, REGISTER NOW!

Renegade1LI

Well-known member
Joined
Mar 11, 2018
Messages
4,959
Location
long island ny
It’s a pallet base and add 4 posts high enough for good air flow and a metal roof. Easy to pick up and move and cheap to construct.
 

redmondjp

Well-known member
Joined
Nov 25, 2014
Messages
2,318
Location
Redmond, WA
I'm working on the non-inverter model of that Champion generator now, with about 15 hours of use on it (is probably 2-3 years old now). Whatever you do, keep the sides open for cooling. Despite a clean carburetor, on fresh gasoline it lopes with only 3KW of load on it, which smooths out when you partially close the choke (main jet is way too lean). It doesn't run on LP at all any longer, which is why I am working on it. From what I can tell, the Chinesium demand regulator no longer functions. I am probably going to install a Garretson KN style regulator on it with an adjustable load block and hopefully that will work. Oh, also, get rid of the crappy OEM Chinese spark plug ASAP - it will look fine but just throw it away and put a better one in (I usually use NGK). Personally, I think the power levels printed on the side are much the same as lawn mower, vacuum cleaner, and air compressor HP figures were in the 1990s and 2000s - very optimistic! Good luck with yours.
 

Jgaz

Well-known member
Joined
Dec 16, 2016
Messages
1,662
Location
AZ
I used to keep my Honda under (and chained to) a cast metal patio table on the patio at the rear of my house. Plenty of air flow and protected from the weather.
 

mike93lx

ALLIANCE MEMBER
Joined
Dec 9, 2013
Messages
37,553
Location
Richmond, VA
I always kept mine close enough to the house that the overhang kept it mostly dry. Otherwise, maybe an inexpensive patio umbrella could worlz (of not too windy) or even just a piece of PT ply on top
 

Mikeske

Well-known member
Joined
Apr 28, 2017
Messages
2,129
Location
Washington State
I just roll my over from my shop and it stop when I am in the carport. Protected and dry the entire time I need it. I put it in the same area as my barbecue IMG_7250.jpeg
 

Dig Doug

Well-known member
Joined
Apr 16, 2018
Messages
1,106
Build an open sided or 3 sided ( for sound reduction) dog house where you want to use it, face the exhaust out away from the house.
 
Last edited:

GrayFlattop

Well-known member
Joined
Jan 18, 2018
Messages
1,042
Location
Chicago
I’d go with a small pop-up canopy tent. You can probably find an 8 x 8 for around $50. They come in handy for lots of things. I used to bring one to driving events for shelter from the hot sun or pouring rain.
 

sofasurfer

Well-known member
Joined
Jul 2, 2012
Messages
56
Good topic. I have never worried about it so far (snow never accumulates on it)but now you have me looking around for ideas.

Heres a couple from Amazon (search "portable generator protector")
 

Attachments

  • 81fjSl62ilL._AC_SL1500_.jpg
    81fjSl62ilL._AC_SL1500_.jpg
    256.5 KB · Views: 34
  • 615xktRLosS._AC_SL1500_.jpg
    615xktRLosS._AC_SL1500_.jpg
    128.2 KB · Views: 36
Last edited:
To avoid these ads, REGISTER NOW!

sofasurfer

Well-known member
Joined
Jul 2, 2012
Messages
56
For use when operating I think I'll make a simple pvc frame with a tarp that clamps to the generator frame.
 

larry4406

Well-known member
Joined
Jan 27, 2006
Messages
19,257
Location
Northern Virginia
 

PatY

Well-known member
Joined
Dec 29, 2019
Messages
72
Location
WNY
I keep my Coleman in the garage when not in use but whenever I've needed it, usually storm related I just put it out in the driveway next to the house unsheltered. Never had an issue in snow or rain.
 

charbar

Well-known member
Joined
Feb 6, 2021
Messages
1,995
Location
Midwest
My old man cut the side out of a 275 gallon IBC tote for his generator. They are designed to be lifted with pallet forks. If you are around a farming area they are everywhere and you can usually get one for free or 10-20 bucks at the most.
 

TurnipTruck

Well-known member
Joined
Aug 28, 2005
Messages
1,566
Location
Southcentral Alaska
A friend of mine thought his Depot special generator failed and had to buy or borrow a replacement in the middle of a multi-day outage in a panic during a blizzard$$$. He later discovered the air filter had completely packed off with snow.
He now has a Cummins brand nat gas standby generator in an attached enclosure with an airtight upwind wall.
The enclosure also has plenty of room around the genny for maintenance, lifting eyes above the heavy stuff, chain link fencing over the air vents, and multiple lights inside. Complete and total overkill, but his wife will never get cold again.
 
To avoid these ads, REGISTER NOW!
Top Bottom