Pyrex tig welding cups

[Bobf]

Curious about these new (to me) cups/collets for the common 17 type and other welding torches. Been welding for years but once I passed 70 my eye sight isn't what it used to be. I was wondering if this allowed any better vision of the puddle. I already have some magnifers in my helmet.

 

[Stooge]

I dont do alot of tig, but i prefer the clear pyrex cups. Makes it easier for me and makes my welds look pretty!
I bought a couple from Michael Furick/ dog fab, happy with them, good prices and made here.http://www.dogfab.com/#2707

 

[WILD-BILL]

I prefer them over the standard tig cups. Allows me to see the puddle at even the oddest angle.

They have 2 different lengths and 2 different diamters. I use the short standard.

IIRC, this is the starter kit I bought......

https://www.arc-zone.com/index.php?main_page=product_info&cPath=13_229&products_id=5029

Also available for other series torches and larger size cups.

 

[Bobf]

Thx for the replies, I decided to order a small kit and give it a try.

 

[ttpete]

Another idea would be to use an HW-20 size torch. They are half the size and the water cooled one is rated at 200 amps continuous.

 

[zkling]

Not a huge fan of them. A standard cup with gas lens provides good visibility. I've broken at least 2 pyrex cups, they are VERY fragile when hot so becareful when and where you set the torch down.

 

[Jason280]

Haven't heard about them being fragile, but I do know theyre not cheap! I've been considering a couple myself for a -9 series torch, but have been too cheap.

 

[zengarage]

Get a stubby gas lens and use the rest of the money for material to practice on. Or if you don't need the practice take the wife out to dinner.