Quickstep192
Well-known member
- Joined
- Aug 16, 2025
- Messages
- 83
I’m planning on using a seat like the one in the first picture by mounting it to a board or steel frame. Note the mounting holes in the second picture.
I want the seat to be easily removed and re-installed.
My first thought was to simply put studs in the mounting holes and use wing nuts on the underside of the frame. But, being a seat, that means standing upside down or crawling underneath to get the nuts aligned and tightened.
Any ideas for nuts that go on and come off quick and easy. Yet hold securely.
I’m open to other ideas too.
I want the seat to be easily removed and re-installed.
My first thought was to simply put studs in the mounting holes and use wing nuts on the underside of the frame. But, being a seat, that means standing upside down or crawling underneath to get the nuts aligned and tightened.
Any ideas for nuts that go on and come off quick and easy. Yet hold securely.
I’m open to other ideas too.
