Quincy Compressor Fitting

[mbret2004]

I'm looking for two fittings for my Quincy QT-5 compressor. They are male 90 degree 3/4" X 3/4 male on both ends. One end is flare pipe thread, the other is NPT, they also have a "seat" machined inside the fitting. I can get them from the local Quincy dealer at $25 a pop, is there another place to source them that might be easier on the pocket. I'm well aware of the danger of not using quality/correct parts, like I said I'll get them from the dealer if need be.

Quincy part # 110919-024

Thanks for your time.

 

[Strouty]

Are they brass, steel, or aluminum? Sounds like an easy part to get, but I would replace it with the same material. I think any local hydraulic hose place would have them.

 

[mbret2004]

It's brass.

 

[Strouty]

Take a look at these, but like I said, any local hydraulic hose place should have something for you.

https://www.google.com/search?clien...8&oe=UTF-8#q=3/4+flare+to+3/4+npt+90&tbm=shop

 

[Murphy4570]

Are you talking about an instrumentation fitting?

Not particularly cheap if so.

About $44 on McMaster.

http://www.mcmaster.com/#8239k44/=11k2kub

 

[bigredmf]

https://www.mrostop.com/169ca-12-12-parker-tube-to-male-npt-brass-fitting.html

Distributor cost is about 12$ on the above

When I googled your part # there was a picture of this fitting


http://store.industrialairpower.com/110919-024-075CTX075MPX9-Comp-Elbow-Fit-T_p_13484.html

The 25$ is not a bad price if they have it in stock and you not paying shipping

It is the same as a standard high quality usa made compression fitting but it has the ferrule captive in the nut for slightly higher pressure

Red


Sent from my iPad using Tapatalk

 

[Strouty]

Sorry, I should have looked at the part number, but I went with what I thought was your description.

It is a 3/4" compression fitting to 3/4" NPT in brass.

http://www.amazon.com/dp/B0070TX6AU/?tag=atomicindus08-20

 

[bigredmf]

That Anderson fitting is a nice high quality fitting

You might be surprised if you buy it when there is a P forged in the side

Red


Sent from my iPad using Tapatalk

 

[md21722]

Try your local plumbing supply house. They may have just what you need for $5.

 

[bigredmf]

Good luck at the local plumbing supply house.

Here is a better quality fitting and great price as the listing is for 3 pieces

http://www.ebay.com/itm/3-ea-Swagel...048250?hash=item51d19c8aba:g:WCsAAOSwpDdVYj29

red