To avoid these ads, REGISTER NOW!

Race deck and toilet?

Blackbyrd

Well-known member
Joined
Nov 28, 2020
Messages
1,169
Location
TN
Anyone ever installed a toilet with race deck style flooring? Attached a pic of what's going on. Tile was installed on concrete floor, I'm wondering can chizzel the rest up and but the plastic floor against the flange and re install a toilet?
 

Attachments

  • 20210124_102025.jpg
    20210124_102025.jpg
    319.5 KB · Views: 102
To avoid these ads, REGISTER NOW!

CSRPenFab

Well-known member
Joined
Oct 27, 2015
Messages
5,148
Location
Meridian Idaho
I wouldn't try to place the toilet on top of the RaceDeck tile. I think the flex might cause you some issues. Instead, do a good job of scribing/cutting the race deck to fit. It cuts easily with a jigsaw, measure twice, cut once.
 
To avoid these ads, REGISTER NOW!

The Cobbler

Super Moderator
Staff member
Joined
Oct 24, 2013
Messages
25,942
Location
Niagara Region, Ontario, Canada
I would think a scribe line on the floor to mark the outer edge of the base of the toilet, cut your tile to just go past the scribe line by maybe 1/2" .fill the center area with equal thickness material, maybe some mortar or equivalent. set your toilet . many moons ago toilets were set in plaster of paris to make them sit rigid
 
OP
B

Blackbyrd

Well-known member
Joined
Nov 28, 2020
Messages
1,169
Location
TN
Kind of what I figured, thanks guys. I can remove one more tile without going under the toilet and **** the plastic up against what's left. Then paint the tile
 

goldtang

Well-known member
Joined
Feb 11, 2012
Messages
475
Location
Western Australia
Once the toilet is in place I would use cardboard to obtain the correct fit and use it as the template to transfer to the tiles (CAD) cardboard aided design.
 
To avoid these ads, REGISTER NOW!
Top Bottom