I may have asked this before but can't find it. Who makes an adaptor that goes on a ratchet to use the next drive size socket but doesn't take up any extra space and does not make the combination any longer? They are like a square ring.
Ratchet size adaptor
- Thread starter johninct
- Start date
Facom makes them.
K-D used to sell a complete set, but they were not very durable and I dont think the product carried over to GW.
Looks like Bahco has them also, maybe more popular in Europe.
www.bahco.com
(D.169RJ) -Compact Adapter (1/4>3/8)
Facom Compact Adapter-1/4>3/8" (D.169RJ) - great for use with ratchets and sockets in - auto parts for your vehicle at Ultimate Garage
www.ultimategarage.com
K-D used to sell a complete set, but they were not very durable and I dont think the product carried over to GW.
Looks like Bahco has them also, maybe more popular in Europe.
1/4" Square Drive to 3/8" Socket Increasing Flat Adaptors
{ "1": "1\/4\" Square Drive to 3\/8\" Socket Increasing Flat Adaptors" }
www.bahco.com
four.cycle
Well-known member
30936 Titan 3 piece drive adapter set (about $16 at O'Reilly's Auto Parts)
jayemm
Well-known member
TGR 3PC. Low Profile Impact Socket Adapter Set - Drive Reducing | eBay
These unique socket adapters allow you to reduce the drive of your sockets without increasing your tool height. The low profile design allows for use in a wide range of applications. Allows you to reduce from 3/4" drive to 1/2", 1/2"Drive to 3/8" or from 3/8" drive to 1/4" without making your...
www.ebay.com
In the past I've also seen some that have knurling or ridges on the rim for turning by hand.
^ those look like the Grey Pneumatic set I have; maybe a little thinner?
ronkz650
Well-known member
The ones with magnetic retention are not what I would recommend. I have a set of the Grey Pnuematic magnetic ones, and all the Koken offerings that work so much better with the standard ball system. The Koken work great. The magnetic ones work OK, but I sure like the Koken better personally, and the Koken you get the knurled edges that give you a nice finger hold.
Chrome Vanadium Cody
Well-known member
- Joined
- Jul 25, 2021
- Messages
- 663
I just got this KTC one for $9. It’s pretty thin. The magnetic retention is weaker than a ball detent for sure but still usable.
I agree. I bought the magnetic style first as it was what I first saw available, but then later I bought the Titan when I saw them posted here. If not concerned by the added height, the ball retention like the Titan, or Koken, is definitely better. The magnet style does work, but you need to be careful as socket retention is weak.
I have this set of adaptors like these for use on a ratcheting box wrench. Thumb wheel, low profile, O-ring wrench retention, detent ball, and QR all included! Thinner than most ratchet/adaptor combos.
www.circlecsupply.com
GearWrench 9230D 3 Piece Metric Ratcheting Wrench to Square Drive Adapter Set
Socket adapter converts a 10mm ratcheting wrench to a 1/4" drive tang Socket adapter converts a 13mm ratcheting wrench to a 3/8" drive tang Socket adapter converts a 19mm ratcheting wrench to a 1/2" drive tang Bright, full polish chrome finish easily wipes clean and resists corrosion
www.circlecsupply.com
KnurledNut
Well-known member
I like the Ultra Steel ones from O’Reillys.
Here’s some pics when they were new:
Snap-on 1/4 w/ adaptor vs. S-K 3/8 in 1/4 body:
The original ones were by Starr Products. Some of the rebranded ones came in different packaging but still had the Starr name on them. I picked up a new old stock set not long ago hiding forever in the back stockroom at a NAPA:
Here’s some pics when they were new:
Snap-on 1/4 w/ adaptor vs. S-K 3/8 in 1/4 body:
The original ones were by Starr Products. Some of the rebranded ones came in different packaging but still had the Starr name on them. I picked up a new old stock set not long ago hiding forever in the back stockroom at a NAPA:
Last edited:
KTC version over here. Ultra slim pass-through style.
There are also quick spinner adapters from Koken that aren't much thicker, but hold much more securely with a standard ball detent.
There are also quick spinner adapters from Koken that aren't much thicker, but hold much more securely with a standard ball detent.
That's the ticket! Love those kinds of finds!The original ones were by Starr Products. Some of the rebranded ones came in different packaging but still had the Starr name on them. I picked up a new old stock set not long ago hiding forever in the back stockroom at a NAPA:
Pinemarten
Well-known member
Another vote for the UltraSteel adapters from O'Reilly's. I have a couple in each size, they are inexpensive, readily available, and nice quality.
four.cycle
Well-known member
^ just ordered two. we'll see how they do. thanks!
KnurledNut
Well-known member
The packaging hang tag is cheap looking but they are made in Taiwan and are good quality. I’ve bought several. They have went up in price over the past couple years, but still very reasonable.
