dabirdguy
Well-known member
Hey all,
I have entered into the world of the insane....I think.
We have bought a bank.... and 2 store fronts. All built in 1902.
I will post pics of the conversion of one of the store fronts into a garage.
Here is a link to the current status of the place. Store one will become the garage:
http://glennsplace.com/the_bank.htm
We will remove half the front glass and bricks and replace them with a garage door.
The first issue I need to deal with is the support of the floor.
The store is on 12 x 2 old wood timbers on 12" centers. the front half is on a 2 foot crawlspace. The back half is a full basement.
Options I can see are:
1. Completely backfill the crawlspace with pea gravel.
2. Remove the flooring and fill the space with a combination of screenings and a 4" slab.
3. Re-enforce the beams with a pair of steel I-beams.
The store is 27 feet wide and 65' deep. I intend to only have 2 cars in at a time. I have rolled complete motors across the floor on dollies with no issue. The wood looks to be in good shape. Cost is a definite issue as the budget is low.
Ideas?
I have entered into the world of the insane....I think.
We have bought a bank.... and 2 store fronts. All built in 1902.
I will post pics of the conversion of one of the store fronts into a garage.
Here is a link to the current status of the place. Store one will become the garage:
http://glennsplace.com/the_bank.htm
We will remove half the front glass and bricks and replace them with a garage door.
The first issue I need to deal with is the support of the floor.
The store is on 12 x 2 old wood timbers on 12" centers. the front half is on a 2 foot crawlspace. The back half is a full basement.
Options I can see are:
1. Completely backfill the crawlspace with pea gravel.
2. Remove the flooring and fill the space with a combination of screenings and a 4" slab.
3. Re-enforce the beams with a pair of steel I-beams.
The store is 27 feet wide and 65' deep. I intend to only have 2 cars in at a time. I have rolled complete motors across the floor on dollies with no issue. The wood looks to be in good shape. Cost is a definite issue as the budget is low.
Ideas?
Last edited:
