To avoid these ads, REGISTER NOW!

Salt Life Hideout

wolflrv

Well-known member
Joined
Jun 7, 2011
Messages
304
Location
Savannah, TN
I have a basic set of tools that I keep in the house for minor stuff, but if I have to something major in the house or yard which requires "shop tools", I have one of those round bucket style tool totes that I throw stuff in for the project and if I need more than that, I'll use a box or crate. When I'm actually using the tools in the house, I make sure to keep dumping them back in the tote or crate, so when I'm done with the project everything gets back out to the shop. Otherwise stuff will get lost in the black hole inside the house or gremlins get the tools...LOL!
 
To avoid these ads, REGISTER NOW!
OP
W

Wingnut65

Well-known member
Joined
Apr 21, 2010
Messages
3,170
Location
Tampa Bay, FL
I just wish I could think that far in advance of all the tools that I think I may need. Each trip back was for something that probably would not have been in a universal all-around tool box that I would have set up - 5/16" ratchet wrench, then a 5/16" socket on a 1/4" drive because I didn't want to torque them with the ratchet, wood bit because the masonry bit wouldn't go thought the wood header beam... But, now I know what to expect next time I ever need to install hurricane panel tracks!
 

flybefree

Well-known member
Joined
May 18, 2008
Messages
1,111
Location
Ohio/Kentucky
Words I will most likely never say "now I know what to expect next time I install hurrican panel tracks."

I will take a small measure of comfort from this come JAN/FEB.

Shaun
 

shopnut

Well-known member
Joined
Feb 22, 2006
Messages
4,237
Location
Florida
I have a basic set of tools that I keep in the house for minor stuff, but if I have to something major in the house or yard which requires "shop tools", I have one of those round bucket style tool totes that I throw stuff in for the project and if I need more than that, I'll use a box or crate.

I just wish I could think that far in advance of all the tools that I think I may need.

I also use a tool tote to get the anticipated tools out to the remote job site, whether its the house or yard. It seems I NEVER grab everything that I eventually need so it usually takes about 10 trips back to the garage to get them.

BUT, the tote really comes in handy for bringing all the tools back in one trip, at least :).
 
OP
W

Wingnut65

Well-known member
Joined
Apr 21, 2010
Messages
3,170
Location
Tampa Bay, FL
Words I will most likely never say "now I know what to expect next time I install hurricane panel tracks."

I will take a small measure of comfort from this come JAN/FEB.

Shaun

Shaun, On the other side of the seasons, I have absolutely no clue what is needed to winterize a home! Never really thought it was necessary for the 4-6 hours of below freezing weather we get at any one time. :lol:

BUT, the tote really comes in handy for bringing all the tools back in one trip, at least :).

shopnut, So the tool tote was worth having on hand, even if it was to reduce the number of return trips. I do have one, I just thought a little job like that would not need it. I guess that is another lesson learned.
 
OP
W

Wingnut65

Well-known member
Joined
Apr 21, 2010
Messages
3,170
Location
Tampa Bay, FL
What’s Up? I mean LOOK At What’s Up… Ceiling Stuff

I’ve shown everyone around the
SaltLifeHideoutIcon.jpg
, but I haven’t shown what I have on the ceiling. To me, that is valuable storage space that has been getting filled up as time goes by.

Starting over the workbench and my third parking bay/workshop, I have long wood stored and I recently installed a HF 30’ retractable power cord with a triple plug end. Not sure why I chose that spot to mount the wood rack, but when we moved in here 10 years ago, it seems like a pretty good idea at the time.

117 (01)

The blue cables are pre-installed wires for a second garage door opener. (Not in the budget yet and not really needed for the shop door). The black cord hanging over the wood is the extension cord I have been using all these years until I put up the retract one. (I just noticed that black cord has a triple plug, too :lol: ) The wood is a lot of 1x’s that I used for shelving in various rooms or as needed for projects, plus other long pieces… On the right side is a spare shelf I made stored up there.

118 (02)

I did need to install spacers on the top of the rack bar at the far end to raise the wood just enough for the garage door to clear it when at the top of its arc when opening and closing. On the far back wall, over the garage door track, is a sifter frame I made from 1x’s and chicken wire for working the yard.

On the ceiling over the middle parking bay is another pair of ceiling T-Racks. I really don’t know what they are called, but they look like this…

119 (03)
On this one, I have additional hurricane tracks and braces. The tracks are over 10’ long and can’t stand along the wall, so they went up there. The 2x3x1/16” angels are spare from the hurricane panels that the installer left for me. I’ll find something to make with them! The 4x4 braces are to brace the inside of my garage doors. The doors I have are hurricane resistant, up to a certain wind speed. I went through Andrew and I don’t want to take any chances. These braces will cut the span of my doors in half for the 9’ door and thirds for the 16’ door. I have 6x6 angle brackets that go on the top of the ‘L’ and attach into the red and blue holes above my doors in picture 02, above. The bottom has an angle that bolts to the floor slab. There is a smaller angle mid height of the brace that has a bolt into the door to help with negative pressures. Eventually I will install these just to get a few shots to post.

Not shown in these pictures is my 50’ retractable hose reel that I will be mounting between the two garage door tracks, just inside the door. With it mounted there, 50’ will get me out to the street for anyone that stops by and needs air. (ever notice how popular you are when someone needs to borrow some tools or needs some air and tehy know you can help?)

Also over the center bay, but accessible from the middle walking aisle, is my new ladder rack. I saw photos of these on someone else’s thread and thought they looked cool. Next to it is my former ladder shelf and hook. The wood shelf on the wall is where the foot of the ladder would rest and then I could push the top up and get the hook under a rung. It worked fine, but doesn’t look as cool as the new one. (I have since taken down the old one)

120 (04) - By the way, did I mention anywhere that I have new lights??? :)

The ladder rack is built from a 1x4 at the top with 2x4’s on the ends. The horizontal is a 1/2” threaded rod with nuts on both sides of the 2x’s. Over the rod is a piece of 3/4” PVC, painted black. (I must note that this is gloss black as I had painted this well before Red Leader get me on the flat black accents in the Hideout! I may have to repaint this now. :lol: ) I do have caps to eventually put over the recessed rod ends.

121 (05)

Now I spent a few too many hours making this - routing the 2x’s so I could bolt each from two directions, sanding all the wood grains, painting, sanding, painting, installing the threaded rods and PVC, and then mounting. Only after it was installed did I find out I made it a little too small. It works, but there is very little room to move the ladder around. Lesson learned!

122 (06)

As I was standing on a 6’ step ladder with the 16’ extension ladder over my head and pushing the feet in first, did I realize that with the feet in first, the extension locks hang down and keep me from pushing the ladder in any further. Flipping it over didn’t work as the locks just hit the top of the rack. So, Wingnut learned another lesson that day - TGIF (Top Goes In First)

123 (07)

But you can clearly see that there is very little extra room to get the ladder all the way in on one rack and then lift it up to slide it in the other end of the rack. It does fit, but really could use another inch to spare. (Like I haven’t heard that one before :lol:. Don't go there!) (There is only 7” clear from the bar to the top, but should have been 8”+)

The ladder is a 16’ fiberglass extension ladder from HD and is 8’ and some change when closed. The ladder rack is mounted 6’ apart, mounted into the trusses above. So making them further apart may have helped, but then I would have needed additional intermediate braces in the attic between the trusses.

124 (08) - The ladder rack works for now. If I start to run low for things on my ‘To Do’ list, I may re-build the rack!

Also visible in this shot is my HF 40’ retractable power cord. I put a 40’ here so that I can take it out into the driveway when needed. It works well reaching out there.

And, just so I don’t forget how far I can pull this one towards the street, I used my handy dandy label maker to mark it as 40’.

125 (09)

And, last but not least, over the first bay, is Nothing! (Except for the two lights)

126 (10)

I am keeping this area open, possibly for a fishing pole rack. I have an idea what I want and when it comes up on my hit list, I will post pix of it as well. It would fit over the garage door opener, leaving the space between the lights and the wall still available for something else.

The shelf over the door has lanterns and a dead chainsaw. No reason why they are there other than it seemed like a good idea at the time. Now that I see what others are doing above their doors, I may just add more storage up there as well.

And far as the ceiling goes, Th-Th-Th-Th-Th-.That's all, folks.



Next Up, The Salt Life Hideout gets the floor tiles installed!


.
 
Last edited:

tinbender 66

Well-known member
Joined
Mar 23, 2011
Messages
2,294
Location
Western Washington State
I really like that ladder rack! I might have to steal another idea.

Did you make the lumber storage racks or are they something that's available to buy? I'd really like a way to store long stuff.

We don't have hurricanes around here, just earthquakes:eek:. I'm sitting on top of about 60' of sand, so my house won't fall down, it will just disappear!
 

flybefree

Well-known member
Joined
May 18, 2008
Messages
1,111
Location
Ohio/Kentucky
Dude you have a great hurricane panel collection....you can use those things to keep zombies out by the way...so they really are quite versatile.
 

Red Leader

Well-known member
Joined
May 15, 2011
Messages
2,688
Location
Denver, CO
Lookin' good Wingnut!

I'm pretty excited about seeing the next update - getting your floor finished! Did you get all the tiles to do it?

The floor is somewhere on my list, but I'd need an index to find it:D
 

shopnut

Well-known member
Joined
Feb 22, 2006
Messages
4,237
Location
Florida
Its hard to believe that hanger is made out of wood! Nice job wn65.

Hopefully others will learn from your experinces and give the ladder just a bit more clearance. It looks like it works just fine, however, and the ladder is certainly out of your way.

Would spacing the entire hanger down from the ceiling solve your problem with one end hitting the ceiling when putting the ladder up there? I picture simply sandwiching a 2x4 between the ceiling and the existing hanger. From the pictures, it seems like the opening is large enough but it's just too close to the ceiling.
 
OP
W

Wingnut65

Well-known member
Joined
Apr 21, 2010
Messages
3,170
Location
Tampa Bay, FL
tinbender 66: Thanks. The ceiling racks for the wood are something that I picked up at Home Depot. I tried to search for them now to get the correct terminology or brand name, and can't find them on-line. They may be something I stumbled across on a shelf. As for the hurricanes, at least we have enough time to be as prepared as we can before they hit. You can keep your earthquakes - too spontaneous.

flybefree: I never really thought about Zombie Panels. That could be a new marketing aspect that could sell hurricane panels across the country.

Red Leader: I'm still excited about the floor. I bought all the tiles last August and put down 1 bay where the Finance Minister parks. Kept it there for 11 months until I got around to putting the pattern down. I still have a couple more trim tiles to cut and install. Your epoxy will be great. That novel you wrote is Awesome!

Granite Guy: Feel free to copy the ideas you find here. That is where I have lifted some and fit them in my place. When you get one up, feel free to post some pix here.

JCQuick and jktruck150, Welcome to the Salt Life Hideout. Thanks for visiting and the great comments. There are cold ones in the fridge when you come back.

JC Nice Bugs. I'm hoping to get around to work on the bus soon so I can be ready for shopping at the Bug Jam in November. Ever make it down?
 
OP
W

Wingnut65

Well-known member
Joined
Apr 21, 2010
Messages
3,170
Location
Tampa Bay, FL
Its hard to believe that hanger is made out of wood! Nice job wn65.

Hopefully others will learn from your experiences and give the ladder just a bit more clearance. It looks like it works just fine, however, and the ladder is certainly out of your way.

Would spacing the entire hanger down from the ceiling solve your problem with one end hitting the ceiling when putting the ladder up there? I picture simply sandwiching a 2x4 between the ceiling and the existing hanger. From the pictures, it seems like the opening is large enough but it's just too close to the ceiling.

shopnut, That idea is Brilliant! :thumbup: I have not thought about the remedy other than since I didn't build it deep enough, my thought was to just re-build it, only make it deeper. But your attention to details on your shop is now rubbing off on my shop as well. :beer:

As I read your suggestion, I pictured this... a 2x spacer 1/2" smaller all the way around. I'd paint it flat black and use it to create a shadow line. Although a larger spacer would act as a base plate and still could be black.

127
I think that may solve my too close tolerance problem. I decided a while ago to post my problems I come across so others can learn - warped doors, ladder rack - and when I do, I have had better repair ideas suggested to me in the process.

Yes, the tan is all wood. I had to break out the router table to get the edges just right. When I bolted it together, I filled the holes with spackle and had to repaint it at least 3 times to get the spackle to soak the paint for the same look as the wood. That is why I really dreaded rebuilding this whole thing. But shopnut comes to the rescue with another brilliant idea. :bowdown:
 
Last edited:

flybefree

Well-known member
Joined
May 18, 2008
Messages
1,111
Location
Ohio/Kentucky
Shopnut for President...this is not to a political statement and not intended to endorse any political parties, ideaology, mascots, or sycophants.
 

shopnut

Well-known member
Joined
Feb 22, 2006
Messages
4,237
Location
Florida
As I read your suggestion, I pictured this... a 2x spacer 1/2" smaller all the way around.
Can't see your picture at work (image hosting site blocked, apparently), but it sounds like you are on the road to recovery.

EDIT: After seeing the picture - that looks perfect!

Shopnut for President...this is not to a political statement and not intended to endorse any political parties, ideaology, mascots, or sycophants.
For God's sake, flybefree, you are going to get this thread shut down for talking about politics! Oops - now I'm going to get it shut down for talking about religion! :wtf:

(Luckily the moderators are cool and know we're just kidding around!)
 
Last edited:
OP
W

Wingnut65

Well-known member
Joined
Apr 21, 2010
Messages
3,170
Location
Tampa Bay, FL
Great idea, fbf! But we need to hurry up and get this thing back on track before moderators shut us down.
shopnut Wow, Religion AND Politics in the same post???

Here, Quick, a distraction...

Not that garage related, but we have been having some backyard visitors this year. The Finance Minister was reading mail on the back porch when they came by one afternoon. Mom is off to the right.

128

It's been fun watching the little ones growing up

129


130

They like our side yard grass for some reason.

131

One day when it poured, Mom decided to sit down for a while.

132

Another doe came with her boyfriend one day.

133

OK, now back to the shop. Hope this was a nice distraction from Politics and Religion... :lol:
 
Last edited:
To avoid these ads, REGISTER NOW!
OP
W

Wingnut65

Well-known member
Joined
Apr 21, 2010
Messages
3,170
Location
Tampa Bay, FL
Yeah, but these Labrodeer don't come when you call them. They wander through and graze, but make a noise and they get spooked. I'm glad they are afraid of people so that they can live a little longer in our society.

As for the grass, we have been fortunate to have a lot of rain recently. I think our water table may be stable this year and we get off the 2-day a week watering restrictions. On some quiet days, you can hear the grass grow. :lol:

Having so much grass in teh yard is the strange mentality of cutting down all the native landscaping - trees, groundcover, etc - that don't need much water and bring in sod that must be watered or it dies. Viscious cycle, but it keeps lawnmower manufacturers and lawn care companies in business. But we don't have that white stuff to deal with...
 

shopnut

Well-known member
Joined
Feb 22, 2006
Messages
4,237
Location
Florida
The deer here in FL are pretty scrawny compared to what I was used to in WI. They’re still nice to look at, however.

I was feeding the dear too awhile back... ...with my shrubs!!! I starting noticing everyone’s vegetation in the front yard being balded. And then one morning I caught them in the act, in the driveway right next to the house. A little spray of “Deer Off” took care of it. I feel sorry for them though, since our community drove them out of their natural habitat years ago.

Nice shots of the wildlife Wingnut65!
 

rickairmedic

Well-known member
Joined
May 31, 2005
Messages
4,165
Location
louisville ,Ky
Jeff I was rather amazed to see Deer in your yard in Tampa . Growing up I dont ever remember seeing a Deer near my parents house and for most of my childhood we were surrounded by orange groves . Fletcher used to go right past our driveway until they moved it over and multi laned it all the way through . Where they moved it to used to be orange grove as well as the Condo's between it and moms house . We also had groves on the other side of the neighborhood till about 20 years ago when some builder bought them up and built million dollar homes in their place on tiny lots LOL. The only time I saw Deer growing up was when we would go out to a buddies family property uot in Pasco county.We get Northern Deer in the yard up here and they dont spook so easy .

Rick
 

Red Leader

Well-known member
Joined
May 15, 2011
Messages
2,688
Location
Denver, CO
Deer eat our crops and taste yummy...an most unfortunate coincidence for the previously mentioned deer I'm sure.

Don't think I'd ever mind with lending a hand with that whole 'population control' thing that sometimes needs to happen with deer:D

Its funny - my wife's family has a small plot of land in the mtns and every time we go we see deer going through. All the women stand around to admire the dear creatures, then I chime in with how reassuring it makes me feel to see all the cute deer around, knowing that there will always be readily available meat should we ever have to bug out to the land. Gets her mom every time:)
 

mdbeck1

Well-known member
Joined
Mar 7, 2010
Messages
2,297
Location
Norman, OK
Don't think I'd ever mind with lending a hand with that whole 'population control' thing that sometimes needs to happen with deer:D

Its funny - my wife's family has a small plot of land in the mtns and every time we go we see deer going through. All the women stand around to admire the dear creatures, then I chime in with how reassuring it makes me feel to see all the cute deer around, knowing that there will always be readily available meat should we ever have to bug out to the land. Gets her mom every time:)

You know there's a Country Western song about that....

...me. I just say mmmmmmmm.... Jerky......
It gets them every time.
 
OP
W

Wingnut65

Well-known member
Joined
Apr 21, 2010
Messages
3,170
Location
Tampa Bay, FL
Thanks Guys for all the deer comments. We moved up here from Miami and are thrilled to have this much wildlife still in the area. Our development also gets alligators in some of the ponds evey year. When they get about 4-5', animal control usually comes to relocate them before they become a problem. I have heard that one conservation area in our development has a lot of wild turkeys and at least one bobcat family. The turkeys I would be willing to get my bow out and thin the flock, but we just enjoy the deer hanging around. Our crops aren't supporting us as they are for flybefree. I have thought about having a BBQ some time and serving venison. I'd just say that I got it 'locally'. We also had a humming bird caught in our screened porch recently. I hadn't seen any before then.

rickairmedic, We live at the north end of Dale Mabry, out where there still is some native and untouched lands. When the developments get built right in the middle of the woods, the wildlife learns to adapt. Pasco is not far from us. In fact, during winter, I can see the coutny line. I could probably put a frisbee over the line if I tried. So, yes, the labrodeer could be from out in Pasco. I've heard some stories of the old Tampa, but I hadn't heard about life before the wide Fletcher. Thanks for sharing. Give be a holler when you make it back!
 

rickairmedic

Well-known member
Joined
May 31, 2005
Messages
4,165
Location
louisville ,Ky
Well then your gonna have to change your location :D. Your not in Tampa your in Lutz ( pronounced luuts :D. I have freinds out that way as well that managed to grab some land while there still was some :D. Actualluy I guess it could be Tampa now seems as though Tampa has spread all the way to Zepherhills even my grandmother lives out there in a fancy community.


Rick
 
OP
W

Wingnut65

Well-known member
Joined
Apr 21, 2010
Messages
3,170
Location
Tampa Bay, FL
Guilty. And, it rhymes with 'Boots'. But for people around the country and around the world, that would be an extra Google search to figure out where I live. Since my desk and paycheck are in St Pete, it's appropriate to just say "Tampa Bay". After all, I cross it daily.
 

rickairmedic

Well-known member
Joined
May 31, 2005
Messages
4,165
Location
louisville ,Ky
LOL I understand . I grew up runnin the orange groves of Lutz but as you said most people know where Tampa is . The only people who know where beutiful downtown Luts is are from the area :D.


Rick
 

Red Leader

Well-known member
Joined
May 15, 2011
Messages
2,688
Location
Denver, CO
Thanks Guys for all the deer comments. We moved up here from Miami and are thrilled to have this much wildlife still in the area. Our development also gets alligators in some of the ponds evey year. When they get about 4-5', animal control usually comes to relocate them before they become a problem. I have heard that one conservation area in our development has a lot of wild turkeys and at least one bobcat family. The turkeys I would be willing to get my bow out and thin the flock, but we just enjoy the deer hanging around. Our crops aren't supporting us as they are for flybefree. I have thought about having a BBQ some time and serving venison. I'd just say that I got it 'locally'. We also had a humming bird caught in our screened porch recently. I hadn't seen any before then.

So the real question is...can you catch a little 'gator and keep it for a pet?:D
 
OP
W

Wingnut65

Well-known member
Joined
Apr 21, 2010
Messages
3,170
Location
Tampa Bay, FL
RL Gators are not good pets. Even though Tubbs had a 6' pet named 'Elvis', neighbors all grab the kids and lock the doors when you take one for a walk. :lol: Besides I live with one and have another that wants to be one in a few years. Sometimes I just can't win...

couchmechanic Nearest beach is about 20 miles away. We've lived here 10 years last month and the only time we go there is to spend a week on Indian Rocks Beach with Indiana relatives. Its sad that even though it is beautiful, I am always thinking of all the projects I could be doing back in the shop. I guess I'm just weird that way.

rickairmedic The Downtown area still exists. The traffic light works fine and the Library and replica Train Station are used regularly. Not much else down there. But you should see the new sports complex a mile west!
 

rickairmedic

Well-known member
Joined
May 31, 2005
Messages
4,165
Location
louisville ,Ky
Wait Jeff you have relatives that are Hoosiers. Now thats funny right there . I live right across the bridge from hoosierville and most of my relatives are down there with you :D.


Rick
 
OP
W

Wingnut65

Well-known member
Joined
Apr 21, 2010
Messages
3,170
Location
Tampa Bay, FL
Small world... but I'd hate to paint it!

Actually my in-law clan may live in the Hoosier state, but their diplomas have little Boilermakers on them...
 

flybefree

Well-known member
Joined
May 18, 2008
Messages
1,111
Location
Ohio/Kentucky
My MIL lives in Indy, I live just south of Louisville, and I love going to Disney! It's like 6 degrees of Kevin Bacon meets GJ.com around here.
 

shopnut

Well-known member
Joined
Feb 22, 2006
Messages
4,237
Location
Florida
OK Wingnut, it's been two weeks or so since a REAL update on the progress. Surely you have done SOMETHING out there!
 
To avoid these ads, REGISTER NOW!
Top Bottom