To avoid these ads, REGISTER NOW!

Seeking Small Hex Bit Ratchet

B

Bolster

Well-known member
Joined
Jul 8, 2008
Messages
4,056
Location
Mexifornia
I'm looking for a quality small hex bit ratchet. Need it for tight clearance situations. Suggestions?

This is the one that has caught my eye:

https://www.amazon.com/gp/product/B07F42ZF9B/?tag=atomicindus08-20

I already own one like the following, unbranded, no great shakes, but it does the job, just wanted to upgrade:

https://www.toolsource.com/14-in-dr...-drive-hex-bit-ratchet-w-handle-p-106154.html

...and since I haven't haunted GJ for awhile, what happened to the GJ image hosting, and what low cost source do you use to post your images these days? It's a lot more fun to post images than links...
 
To avoid these ads, REGISTER NOW!
B

Bigblue&Goldie

Well-known member
Joined
Mar 12, 2009
Messages
10,672
Location
AZ
This is one tool you want to make sure has super light back drag. I have a SnapOn (bring on the hate) and it's been worth every penny. I bought it on ebay for ~$60. Best tool ever for assembling Ikea **** and kid's toys.
 
T

TonyJ

Well-known member
Joined
Sep 10, 2019
Messages
384
Location
West Virginia
76d13bb14af157d1dab6f1206c21f95e.jpg $11 on eBay. I’ve had one for close to 10 years and lost it and bought another one last week. I use it more than a 1/4 regular ratchet by using a 1/4 bit adapter


Sent from my iPhone using The Garage Journal mobile app
 

Attachments

  • 76d13bb14af157d1dab6f1206c21f95e.jpg
    76d13bb14af157d1dab6f1206c21f95e.jpg
    404.6 KB · Views: 14
L

Luciferi

Well-known member
Joined
Mar 24, 2013
Messages
219
I have then Titan flex head. It works great and wondered why I didn’t get one sooner
 
K

KnurledNut

Well-known member
Joined
Jan 28, 2011
Messages
8,106
Location
n/a
Bolster said:
I'm looking for a quality small hex bit ratchet. Need it for tight clearance situations. Suggestions?

This is the one that has caught my eye:

https://www.amazon.com/gp/product/B07F42ZF9B/?tag=atomicindus08-20

I already own one like the following, unbranded, no great shakes, but it does the job, just wanted to upgrade:

https://www.toolsource.com/14-in-dr...-drive-hex-bit-ratchet-w-handle-p-106154.html

...and since I haven't haunted GJ for awhile, what happened to the GJ image hosting, and what low cost source do you use to post your images these days? It's a lot more fun to post images than links...
Click to expand...

Bolster is back!
:beer:

Both of the ones you linked, and the VIM someone else posted (and many other brands) all have Reverse Gear brand mechanisms. So you wouldnt be gaining much over what you currently have.

On the pics, just link the URL using the picture button when posting.
 
R

RKA

Well-known member
Joined
Jun 9, 2010
Messages
1,744
Location
NJ
Bigblue&Goldie said:
This is one tool you want to make sure has super light back drag. I have a SnapOn (bring on the hate) and it's been worth every penny. I bought it on ebay for ~$60. Best tool ever for assembling Ikea **** and kid's toys.
Click to expand...

Same one made by EZ Red? I have a full set of VIM bit ratchets and that’s my one gripe with them. Too much back drag considering how and where these are intended to be used.
 
P

pedalwrench

Member
Joined
Jun 5, 2011
Messages
23
I have the presta cycle thing n I love it, mostly because of the ability to turn it into a t-handle. It's designed as a bike tool and that's a very handy feature in that application. I haven't seen another bit ratchet that does that, so I'm a fan.

Sent from my moto g(7) power using Tapatalk
 
J

JBH

Well-known member
Joined
Jan 17, 2018
Messages
811
M6erfan said:
Did someone say low back drag?

http://www.kokenusa.com/products/model/622
Click to expand...


I have the flex head version of the Koken as well as Felo, Reverse Gear, Stahlwille, Anex, and Wiha.

Koken is by far the best in actual use. Felo is a distant 2nd. The others have their place; the tiny headed Reverse Gear for USAG/Facom locking flex is sometimes more useful than full sized Koken for example.
 
B

Bigblue&Goldie

Well-known member
Joined
Mar 12, 2009
Messages
10,672
Location
AZ
RKA said:
Same one made by EZ Red? I have a full set of VIM bit ratchets and that’s my one gripe with them. Too much back drag considering how and where these are intended to be used.
Click to expand...

The one I have is essentially the 1/4 Dual 80 (72t) ratchet.
 
M

M6erfan

Well-known member
Joined
Dec 6, 2014
Messages
10,170
Location
'Merica!
ssdave said:
My favorite is the MAC MR5bd, unfortunately no longer made. I have 3 of them. I also have a Snap-on, and it's okay, just longer handled. I use it for more leverage. I bought a Koken flex head 5/8" for heavier work, and it's well made. I have a long handled EX red, and it's mediocre. But long handled.

Buying new, I'd recommend either the Snap-on or the Koken. The difference between them is the Koken has retaining ring for keeping in the bit, the Snap-on is magnetic. Both have their advantages.
Click to expand...

MAC website shows it as available...

https://www.mactools.com/en-us/Ratchets-and-Accessories/1-4-Drive/MR5BD/1-4-Mini-Hex-Bit-Ratchet
 
N

nbpt100

Well-known member
Joined
Oct 19, 2016
Messages
2,301
Location
Massachusetts
I have a 25 year old Sears brand. Nothing fancy and I hardly use it so it is fine. I recently needed a very low profile so I bought a 1/4 ratcheting box wrench and cut the bit down to minimum length that would work. I needed to be careful to not let the bit fall out but it worked to get the screws removed.
If I were to buy a new one I would look at VIM or the Koken that were shown above.
 
I

ihateminimumwage

Well-known member
Joined
Jan 26, 2012
Messages
3,960
ssdave said:
My favorite is the MAC MR5bd, unfortunately no longer made. I have 3 of them.
Click to expand...
They're actually listed as in stock by MAC again, but with the $55 price tag, I've been doing just fine with the VIM that TonyJ posted a picture of.
 
B

bonneyman

Well-known member
Joined
Apr 22, 2010
Messages
8,775
Location
Desert SW
I have a Reverse Gear clone that works very well, and the cheapie one offered by Craftsman has turned out to be pretty decent as well. For $11 and change it was definitely worth it.
 
T

TonyJ

Well-known member
Joined
Sep 10, 2019
Messages
384
Location
West Virginia
ihateminimumwage said:
They're actually listed as in stock by MAC again, but with the $55 price tag, I've been doing just fine with the VIM that TonyJ posted a picture of.
Click to expand...



Autozone used to carry one I think was branded as Titan that was the same as the VIM one but I haven’t seen it there in a while. The one I posted a pic of is my new one and my old one which is now lost I took apart and shortened the spring in just by one coil and gave it allot less back drag and it made it much better


Sent from my iPhone using The Garage Journal mobile app
 
To avoid these ads, REGISTER NOW!
C

CGarage

Well-known member
Joined
Nov 23, 2018
Messages
2,995
Location
United States/Switzerland
Bigblue&Goldie said:
That's a cool looking ratchet. I notice the kit with bits is only $10 more.
Click to expand...


The bits are phenomenal and the tool is a lifesaver. 72 teeth in the mechanism also. I believe it is the smallest on the market. I have both the fixed and flex head versions. The flex head was released a few years after the fixed head.
 
M

madmanc

Well-known member
Joined
Aug 27, 2018
Messages
90
Location
england
i have glued a penny to the top of a hex and used a ratchet spanner to work it for a tight space once , you can do a google search theres loads of tiny kits for these jobs , bahco being a very good one that i can recommend
 
M

Mr_John

Banned
Joined
May 12, 2011
Messages
256
I was looking for the same thing and bought a TONE 1/4 open ratchet set:

https://www.ebay.com/p/1086659269

I bought this as well, a Koken 1/4 mini ratchet, along with a 1/4 to 1/4 anvil to bit socket:

https://www.ebay.com/itm/Koken-Stub...522007?hash=item25acd66657:g:zYsAAOSwq6Nb1MUb

Both are great for low clearance areas. The TONE ratchet is nice, but the if the Koken fits, it has extremely low backdrag when you're trying to avoid the bolt backing out. I also have a set of GearWrench stubby Torx sockets, with a set of stubby VIM XZN triple squares on order from Zoro for those extremely tight access areas where the Koken will actually fit (vs the TONE).
 
C

CGarage

Well-known member
Joined
Nov 23, 2018
Messages
2,995
Location
United States/Switzerland

Attachments

  • E80277E0-6522-4D88-A4FA-C9F852EBF375.jpg
    E80277E0-6522-4D88-A4FA-C9F852EBF375.jpg
    158.5 KB · Views: 134
  • A06A8525-29AC-4249-A8FF-B13778936916.jpg
    A06A8525-29AC-4249-A8FF-B13778936916.jpg
    161.4 KB · Views: 148
Last edited:
R

RKA

Well-known member
Joined
Jun 9, 2010
Messages
1,744
Location
NJ
Along the lines of the OP’s question, does anyone have a suggestion for a long ratcheting bit wrench with low back drag?

https://www.amazon.com/Vim-Tools-HEX-Ratchet-Vim-HBR8/dp/B073WLCWCX/ref=asc_df_B073WLCWCX/?tag=hyprod-20&linkCode=df0&hvadid=343227722076&hvpos=1o4&hvnetw=g&hvrand=587962265666246338&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9004018&hvtargid=pla-751271648858&psc=1&tag=&ref=&adgrpid=68750937003&hvpone=&hvptwo=&hvadid=343227722076&hvpos=1o4&hvnetw=g&hvrand=587962265666246338&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9004018&hvtargid=pla-751271648858
 
D

DSLTRK

Well-known member
Joined
Jan 7, 2012
Messages
1,118
Location
PHELAN, CA
$15 at Oreilly auto parts. Comes with the rare 1/4" hex-square adapter.




 
Last edited:
OP
B

Bolster

Well-known member
Joined
Jul 8, 2008
Messages
4,056
Location
Mexifornia
Well! I can see this is not going to be a "buy one" sort of affair, it will require a collection. Thanks for pointing me in excellent directions, folks!

I am partial to the "passthrough" types, where the hex hole is broached all the way though, since that allows really low profile access. (I have even cut down hex bits in length for minimum clearance issues=too radical?)
 
J

JBH

Well-known member
Joined
Jan 17, 2018
Messages
811
Bolster said:
Well! I can see this is not going to be a "buy one" sort of affair, it will require a collection. Thanks for pointing me in excellent directions, folks!

I am partial to the "passthrough" types, where the hex hole is broached all the way though, since that allows really low profile access. (I have even cut down hex bits in length for minimum clearance issues=too radical?)
Click to expand...



If you’re looking for absolute minimum clearance I think the set to buy is the Würth one with the 11mm outer hex through sockets (compatible with Wera, Snapon, and Matco, but not the garbage set Astro Pneumatic sells), low profile bits, and dual 1/4” hex/11mm ratchet.

I think Matco and KS Tools have similar sets.
 
Z

ZRX61

Well-known member
Joined
Aug 15, 2006
Messages
28,716
Location
Solar Blight Valley, SoCal
I have a Sunex that's barely 3in long & a GW that's 1/4in on one end & 5/16 on the other. Both came with a few bits & the GW has some 1/4 drive sockets.
 

Attachments

  • 20191102_123930.jpg
    20191102_123930.jpg
    154.3 KB · Views: 108
  • 20191102_123950.jpg
    20191102_123950.jpg
    155.3 KB · Views: 73
You must log in or register to reply here.
To avoid these ads, REGISTER NOW!
Top Bottom