To avoid these ads, REGISTER NOW!

Severe pitting on concrete floor

CTC DEEZUL

Member
Joined
May 10, 2014
Messages
16
Location
Indiana
Converting my 1.5 car to an office. The concrete is pitted.

What would be good to lay down to smooth it all down so I can either vinyl plank or epoxy coat the floor?

Thanks.

20240120_153349.jpg
 
To avoid these ads, REGISTER NOW!

Mikes61

Well-known member
Joined
Dec 25, 2023
Messages
236
I used Quikrete Structural Repair to fill in some holes, smooth out my stemwall and float my slab where I removed part of my stemwall.

It’s a powder that mixes with water. Available at Home Depot or Amazon. Be sure to follow the directions about wetting your existing cement first.
 
To avoid these ads, REGISTER NOW!

FJ4FUN

Well-known member
Joined
Jul 28, 2014
Messages
626
Location
NorCal
What you choose to use for filling the spalled areas will depend on what you choose to do afterwards. If you go with any sort of laminate/vinyl plank then any cementitious patching material will be fine. If you intend to apply an epoxy you'll need to patch with an epoxy based mortar.
 

Garage Flooring

ALLIANCE MEMBER
Joined
May 21, 2011
Messages
5,288
Location
Grand Junction, CO
We sell large repair kits for areas like this BUT it would be overkill if you are not doing a coating. garageflooringllc.com/product/concrete-repair-materials/
 
To avoid these ads, REGISTER NOW!
Top Bottom