Show me your HF toolbox!

[Steevo]

All, I did verify from Mpls, MN store that HF insider club (?) pricing is $329.99. I picked up a road and track and used the $349 coupon since I'm not a member.

Interesting. I am an inside track club member, but there is no discount listed for the box when I use the website and go to the Inside Track Club section. It is still $399

 

[Twiggss]

This is my HF Service cart with a 3 draw intermediate BB box on the bottom,
A little time and some rattle can yellow and now it a 7 draw service cart.

Been thinking about doing this with mine. Trying to score a cheap intermediate box so I can have some more storage.

 

[Skysurfer]

I got tired of wiping greasy handprints off the lid so I added a grab bar.

A Brother PT-1830 label maker was used for the drawers.

 

[derektm]

Interesting. I am an inside track club member, but there is no discount listed for the box when I use the website and go to the Inside Track Club section. It is still $399

May be because this is a 7month old thread

 

[austinlord13]

Here's my HF cart that I pretty much use as a stationary box:

Top:

Junk Drawer:

Pliers:

Ratchets, Sockets, Wrenches, etc:

Torque Wrench and randoms:

Hammers and a few nut drivers:

I still have plenty of tools in mind that will be added to my collection soon.

 

[NoiseRacing]

May be because this is a 7month old thread

I got a $100 the bottom box when i signed up for the ITC, then called harbor frieght saying I'm Canadian how can i get the ITC flyer. They said I can't complained, getting refund check in the mail of 19.99 plus PA taxes(ITC cost).I love my box

 

[Racr350]

Bought the black 4 drawer cart about 2yrs ago for $89 during a big sale and never looked back. Its been rock solid and has never failed me. Hoping to get many more years out of it.

Obviously the Cart on the left side of my Main Box :

 

[dlc]

Bought the black 4 drawer cart about 2yrs ago for $89 during a big sale and never looked back. Its been rock solid and has never failed me. Hoping to get many more years out of it.

Obviously the Cart on the left side of my Main Box :

Love the Monster stickers. Where did you get those? I'm going to copy yours

 

[Racr350]

Haha flattering. Amazon has them. Just search for "One Industries Monster" and it'll be the first and only decal sheet. I wanna see pics when you're done!

Might as well give ya think link to make it easy:
http://www.amazon.com/One-Industries-Monster-Energy-Decal/dp/B001DDMTHU/ref=sr_1_1?ie=UTF8&qid=1312397691&sr=8-1

 

[toxiclows]

here is my hf 56" roll cab. I built the hutch from wood. love it so far.. added power strip, digital picture frame, laptop hookup speakers with subs and led lighting

620 for the box and less than 100 in the hutch

 

[bobemmerich]

Heres mine after the paint...

I love that look. It looks good.

 

[pcpro15]

I was surprised I didn't see any of the HF 16 drawer boxes on here. The only drawback to the 16 drawer one, is the width... I have to put the shlf80a in the drawer sideways to make it fit, and the same story in my pry bar drawer. For me I don't have the need for a lot of depth in my drawers, so that's why I went for that style box. I am curious how you guys organize your stuff in those deeper style drawers, or do you just toss everything in?

http://www.harborfreight.com/26-8-drawer-roller-cabinet-with-8-drawer-top-chest-67831.html

 

[Sterff]

I love that look. It looks good.

Thanks!

 

[Pug}{maN]

I got tired of wiping greasy handprints off the lid so I added a grab bar.

A Brother PT-1830 label maker was used for the drawers.

love the black , makes it look sweet !

 

[Pug}{maN]

any of the new box's here yet ?

 

[zjrog]

love the black , makes it look sweet !

I was looking for a good reason to paint the drawer fronts black... Thats it. When it warms up, I'm masking and painting.

 

[wornoutoldman]

I still have the $349 pdf (good thru 2/12 so act fast) if anyone wants one just PM me your email address...

 

[not-required]

Here's mine:

 

[skulldrinker]

Here's an unusual configuration of a 7 drawer side box and a service cart. I just had to notch the lid in two spots to make it close properly.

you could just put a peg leg under the side cab or another wheel.

 

[betcd]

Here's mine:

I like the craftsman labels on the box the only thing is that craftsman could only wish they had a box made that good

 

[dlc]

Here's my latest setup. I want to get one more lower box before they're all gone.

 

[T-rev]

Bringing a thread back from the dead. But I'm trying to find a model # or some info on that locker style side cabinet on dlc box. Any help would be awesome
TIA

 

[ibedayank]

Bringing a thread back from the dead. But I'm trying to find a model # or some info on that locker style side cabinet on dlc box. Any help would be awesome
TIA

http://www.harborfreight.com/end-cabinet-for-roller-tool-chest-68991.html

 

[cburnscrx]

http://www.harborfreight.com/end-cabinet-for-roller-tool-chest-68991.html

I am guessing he's looking for the smaller side locker, not the full length locker. I don't know if they make the small side locker anymore???

 

[mechan]

Could try the half height side locker made by International. Looks to be about the same dimensions.

 

[ibedayank]

http://www.sears.com/international-...p-00937565000P?prdNo=3&blockNo=3&blockType=G3 maybe?? kinda$$ for just a cabinet with one shelf for me

 

[MJO]

I'd post a picture of mine but it was a piece of **** so I returned it.

 

[Hpozzuoli]

Here's my 44 and cart.

 

[Hpozzuoli]

Here's my 56.

 

[Hpozzuoli]

And here's a coupled of stuffed drawers on the top of the 56.

 

[Tripp2012]

My new 44" top and bottom

View media item 36482

 

[zkling]

Bringing a thread back from the dead. But I'm trying to find a model # or some info on that locker style side cabinet on dlc box. Any help would be awesome
TIA

I don't think they make them any more. Part number is or was 68786, 2 shelf end cabinet.

 

[Drunken Yak inc]

I will take some better pictures tonight.

 

[90zcar]

Here's my debadged 56" that I made a top front edge for from a puece if aluminum angle that I notched out
View attachment 306861



Sent from my iPhone using Tapatalk

 

[90zcar]

Sent from my iPhone using Tapatalk

 

[jakemac]

As posted in other threads, here's my 26" frankenbox.
I also have the 5-drawer cart out in the garage. All keyed-alike.

 

[John316]

My boxes with drawer mods

 

[Fab80]

Had it close to a year, plan on adding the side boxes for more storage when money permits. A few pics of the drawers, I know the foam shadowing takes up room but I love neat drawers. Besides, Ill just add on to store more tools! I have more drawers filled just as neat but only loaded these up.

 

[Hpozzuoli]

Sent from my iPhone using Tapatalk

Where did you get that aluminum strip? I like that idea

 

[Fab80]

Repainted and repurposed.

Very nice!