Show your 3/4 ratchets....

[48548]

Seeing the set on here for sale, I thought I would post pictures of 3 of my plomb 3/4 and 3 breaker bars that go with them and the proto ratchet adapter. I also took 2 pictures of the 1" inchers next to them. Also the one on the top was the new one I just got for 70 with shipping and really nice condition, I haven't cleaned it up yet and the drive plug is nice. I have 2 others in the box with the sockets, but did feel like getting them out... Also I like the heads on the top better they just look stronger to me and cleaner, but I don't think strenght was ever a problem for the proto/plomb design. The ratchet adapter is an older proto, not the same design as the 5447, this one is a really odd design on the inside and I got it for 13 on ebay a while back as well.

Before I cleaned them up.

Also this was the posting on ebay for a total of 130 with shipping a while back... They were cheap because a lot of the stuff has intials on them and ruined the value of the tools...

After I cleaned them and put them in a proto box with a couple of ratchets and other stuff I don't use often.

 

[chrislehr]

Nice.

Heres my only set I am working on finishing. I would love to find a Pebble 3/4 ratchet - that set in classifieds was AWESOME... I couldnt pull the trigger though.

 

[Tool Pants]

Proto pebble.

 

[48548]

Nice I have one proto 3/4 pebble, I like it also. Yours looks great.

 

[G1K]

I also have a plomb pebble set

R

 

[MOPARHOUND!]

Some ratchets for now..........

Left to right............

1) Antique Blackhawk, female drive, no reverse lever
2) New Armstrong (Proto design)
3) SK
4) Snap-On
5) Like New Craftsman "V" series
6) Mac Ratchet Adapter, with Craftsman breaker bar

 

[Mickey O]

Got this baby adapted for 3/4" drive:

 

[arkangel06]

thats one heavy duty ratchet mickey!


I love those pebble proto ratchets!!

 

[DynoDale]

I didn't get the 600 ft-lb. clicker torque wrench in the picture.

 

[48548]

That is one nice set.

 

[cruiser808]

48548 and tool pants, you guys are the devil, tempting us with all that pebbly goodness. Until I met you guys and skfarmer, I had no desire to possess any Plomb tools, even though I'm a Proto tool enthusiast and most of my professional tools are Proto made. Here in Hawaii, it's either Snap-on or Proto.

So now, I'm a complete pebble addict. Man, I gotz to have it!!! Damn you guys, I need an intervention. Oh, by the way, I'll be posting pics of my 1" Plomb pebble ratchet went it comes in the mail. Ohh, feeling so cold.........

 

[bentt]

I recently picked this up from Kijiji. I'll include the listing in case anyone is interested, as the guy had 20 of them ($60). Also, he was willing to list on Ebay and ship (negotiable).


http://london.kijiji.ca/c-buy-and-s...y-Ratchet-200-MSRP-24-Long-W0QQAdIdZ185713703

 

[Mickey O]

Both 3/4" ratchets together, the breaker bar and other stuff is at my other place:

 

[cruiser808]

Both 3/4" ratchets together, the breaker bar and other stuff is at my other place:

Outstanding Mickey - that ratchet and other Proto tools helped me buy my house. long story.

 

[Chreese]

Stahlwille 55/10/6

Chreese

 

[Zrexxer]

Protos.

 

[bdran]

 

[fordbroncodave]

i need 3/4" drive stuff. i only have the 2 adaptors 1/2 to 3/4 and 3/4 to 1/2"

 

[caper]

I recently picked this up from Kijiji. I'll include the listing in case anyone is interested, as the guy had 20 of them ($60). Also, he was willing to list on Ebay and ship (negotiable).


http://london.kijiji.ca/c-buy-and-s...y-Ratchet-200-MSRP-24-Long-W0QQAdIdZ185713703

That's an awesome deal on a ratchet that's damn near bullet proof!I have one of those Gray's and have had two men pulling on a 7' pipe on it's handle.It's been unbreakable for me.Wish the chrome on mine still looked that good.

 

[caper]

Here's the two I have left.A Snap on and a Gray.Used to have another of the Gray's with a 3' handle but somebody else wanted it more than me and it grew legs.Both Made In Canada!

 

[farmall57]

From my IH tools collection:

 

[IONH]

I have item 5494 from HF. I often use these sockets for press work as it turned out I didn't really need 3/4" tools for much with 12 point sockets.

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=5494

The only thing I really needed in 3/4" was a 32mm for some axle nuts and the 12 point wouldn't cut it. So I picked up a 32mm 3/4" 6 point impact socket and now I'm all set.

 

[TruckTech915]

Here's mine compliments of a fellow GJ member
http://i280.photobucket.com/albums/kk173/wrenchr/Toolinshit013.jpg
http://i280.photobucket.com/albums/kk173/wrenchr/Toolinshit014.jpg