Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
Snapped-off
Well-known member
Picked up the rest of the screwdrivers to complete my set. Also got their 2 marine drivers.
The feeler gauge set is something I've been eyeing for awhile and it just so happened to be on sale, and sitting right next to the checkout station. I can't explain the pinch-off pliers, but they came with too. Looks like they're made by Lang.
Oh yeah and the 'free' hat
The feeler gauge set is something I've been eyeing for awhile and it just so happened to be on sale, and sitting right next to the checkout station. I can't explain the pinch-off pliers, but they came with too. Looks like they're made by Lang.
Oh yeah and the 'free' hat
PelicanPines
ALLIANCE MEMBER
Hansen is working on trays with sizes that don't exist... it's their new marketing standard... keep their customers wanting what they can't have... completion.
Last edited:
2ndGearRubber
Well-known member
Capacitive probe and a valve lash adjustment tool
I tested out the capacitive probe last night. I've got to play with it some more to get a consistent trigger.
Try to trigger on the pull down, dwell period, rather than a high trigger from the firing line.
Yeah, 5/8" deepwell 1/4" Dr is nearly non-existent.
rockinacummins
Well-known member
Not much, but these were on special at Bomgaars and I’ve broken several from my last set. $14.99 (regular $29.99)
Picked up the rest of the screwdrivers to complete my set. Also got their 2 marine drivers.
The feeler gauge set is something I've been eyeing for awhile and it just so happened to be on sale, and sitting right next to the checkout station. I can't explain the pinch-off pliers, but they came with too. Looks like they're made by Lang.
Oh yeah and the 'free' hat
(raising hand now)
I've seen several feeler gauge purchases here this year. What are people using them on? Are there any modern cars without hydraulic lifters/followers left?
I have those ratchets, they also have the same bend. I wonder why that is so.Had to replace a Starrett 98 that I dropped (oops). Also got a 1-5/8” for some 1” anchors we have to place next week. And bought a couple 1/4” ratchets for the gang box. Always interesting to see what brands comes from McMaster. Curiously the ratchets aren’t straight. Not sure if this is a Proto thing.
Kasal
Well-known member
Tool of the day Facom carbide tipped pen, and some bottle openers I added to my small collection (I actually only had a Wera)
KnurledNut
Well-known member
If an impact socket will work, Tekton will soon be releasing 5/8, 11/16, 16mm, 17mm in 6 point shallow ($5ea) and deep ($6ea).
https://www.tekton.com/1-4-inch-drive-x-5-8-inch-deep-6-point-impact-socket-sid03016
Snapped-off
Well-known member
I still work on older stuff including power equipment. More of a luxury purchase.
I'm not a Tekton fan and would prefer chrome with the thinner wall but might just have to ante up for them. I know there's a couple on Amazon $17-23 range, kinda steep in my thoughts.If an impact socket will work, Tekton will soon be releasing 5/8, 11/16, 16mm, 17mm in 6 point shallow ($5ea) and deep ($6ea).
https://www.tekton.com/1-4-inch-drive-x-5-8-inch-deep-6-point-impact-socket-sid03016
CHI_Tool&Die
Well-known member
Matco guy showed up with the three ratchets I ordered back in June. Ordered some bits for the next time he comes back. Cool dude but he has had all kinds of problems with his truck so I can’t be angry that he’s super behind on stuff. I’m just happy I have someone coming to the shop. I don’t think he has a truck anymore because I have never seen it.
The one bad thing is that I have to warranty out the 18” flex head. It’s bent like a banana and the handle is crooked as hell. I didn’t notice it until I started putting it in my box. Hopefully I get it warrantied without issue and can get another quick enough.
The one bad thing is that I have to warranty out the 18” flex head. It’s bent like a banana and the handle is crooked as hell. I didn’t notice it until I started putting it in my box. Hopefully I get it warrantied without issue and can get another quick enough.
Attachments
If your dealer doesn't quickly help you, call Matco at the number on their website. Explain the problem, tell them I'll send you a picture to prove the issue, ask for their email.....
From my one experience calling them for a rebuild kit, they have great customer service. I just said, "I need a rebuild kit for a ....." And, no questions, I had one on my porch in a few days at no charge.
Edit- I probably have about five dual 88s and have had no issues with mine. This has been my go-to ratchet when Gearwrench doesn't make a 90T in the longer length.
CHI_Tool&Die
Well-known member
Thanks for the heads up! And yeah, I really like the 88s. They are incredibly smooth and the length offerings beat out everyone else. Definitely my favorite ratchets to date.
Realized a couple weeks ago that the beat up, old, craftsman side cutters that I carry in my truck tool roll will no longer cut much of anything.
I actually looked at HF icon side cutters for $20 but just couldn’t pull the trigger on them.
Was in Lowes today for a drywall patch panel and saw these USA Klien pliers for $25.
They went home with me.
I actually looked at HF icon side cutters for $20 but just couldn’t pull the trigger on them.
Was in Lowes today for a drywall patch panel and saw these USA Klien pliers for $25.
They went home with me.
Last edited:
ATate028
Well-known member
I had a ordered a Vessel ratcheting screwdriver earlier in the week and it arrived today. I'm kind of excited to find something to use it on. It's the first quality ratcheting screwdriver I've owned.
BobsYourUncle69
Well-known member
Added an oscillating tool today. I could either buy the tool for $169 or buy 2x4ah batteries with charger and get the Oscilating tool with it for $199
These batteries have the Cells made in Singapore while the batteries that came with the bundle are made in Japan. Any know if there is difference in reliability ?
Attachments
Last edited:
BobsYourUncle69
Well-known member
I'm curious to try the Vessel.I had a ordered a Vessel ratcheting screwdriver earlier in the week and it arrived today. I'm kind of excited to find something to use it on. It's the first quality ratcheting screwdriver I've owned.
Stopped by TSC today looking for a few random sockets.
Picked up a clearance socket and decided to grab these stubby Gearwrench ratchet SAE wrenches.
Picked up a clearance socket and decided to grab these stubby Gearwrench ratchet SAE wrenches.
Later this evening, the wife and I made a trip to Menards after supper. I picked up some single sockets and 2 sets on 12 pt deepwell in 1/4" drive.
Also grabbed another drawer organizer.
Also grabbed another drawer organizer.
A very kind GJ member sent me these blowguns after I made a comment on not having, and wanting, a GuardAir high volume. Tube is a 24in extension and a pistol grip Vessel is pretty sweet too. Thank you Sir!
Scored a deal on 1/2x18 VSM Germany sanding belts, $4.41 for a 20pk. Been wanting a sander but at the time of buying the belts I did not own one. Yeah typical GJ actions. Belts not here yet... but I did grab a Bauer corded today. And got my Free 4pk of microfibers.
Scored a deal on 1/2x18 VSM Germany sanding belts, $4.41 for a 20pk. Been wanting a sander but at the time of buying the belts I did not own one. Yeah typical GJ actions. Belts not here yet... but I did grab a Bauer corded today. And got my Free 4pk of microfibers.
Later this evening, the wife and I made a trip to Menards after supper. I picked up some single sockets and 2 sets on 12 pt deepwell in 1/4" drive.
Also grabbed another drawer organizer.
I must say, you are going full ham on filling up those beautiful boxes!
richfinn
Well-known member
I'm a sucker for dual purpose tools and making more space in my tool bag, thanks for sharing
richfinn
Well-known member
Honda
Still? Awesome! Next question about the modern Japanese car without lifters: does anybody really get them checked? Do the clearances change?
Madjik Man
Well-known member
- Joined
- Dec 3, 2015
- Messages
- 1,530
I had a ordered a Vessel ratcheting screwdriver earlier in the week and it arrived today. I'm kind of excited to find something to use it on. It's the first quality ratcheting screwdriver I've owned.
I have the Anex 397 ratcheting screwdriver and absolutely love it. So smooth, so easy to use.
If it ever fails for some unknown reason I'll try the Vessel.
Hard to set jakes without them
lotus_esprit
Well-known member
- Joined
- Nov 26, 2009
- Messages
- 113
I have the marine drivers in my Snap On website online basket - have you bought them for thier intended use (outboard motor gearbox drain screws), and if so which one is the best fit?Picked up the rest of the screwdrivers to complete my set. Also got their 2 marine drivers.
The feeler gauge set is something I've been eyeing for awhile and it just so happened to be on sale, and sitting right next to the checkout station. I can't explain the pinch-off pliers, but they came with too. Looks like they're made by Lang.
Oh yeah and the 'free' hat
richfinn
Well-known member
I've been working a lot of overtime at work. I believe I can justify (in my own expenses) to spend so cash on tools. The amount I have saved us over the years working on vehicles, house, garage and life in general, I think it's money well spent.
FWIW, I would rather buy stuff now, use it now and enjoy life rather than wait till I retire to buy things, a time that I could possibly never see. . . . . as they say, "you can't take it with you."
HF grabby tool putting in real work
Dog on the right looks like one of Mikey's friends...
Mike
Mr. Roboto
Well-known member
Impact set
Beerhippie
Well-known member
I use feeler gauges to set the clearance on the rollers of the brewery grist mill and to set the clearance between the backplate and impeller of some of our brewery pumps--and occasionally find other uses for them.
It was a good feeling to downsize as I reached the point that I wasn't physically capable of doing much anymore, I enjoyed what I was able to own and keep when $$ and health were good. Everything I downsized went to somewhere else it was appreciated and is being used.
The best part is I haven't come up short yet by having to purchase a tool that went away.
I still have a few M12 tools that really never got any use, so I boxed them 6 months ago and if no use presents itself soon I will sell them.
No regrets, my Step-Son will get whatever is left when the end arrives, it's really a good feeling.
