Show your new tool arrivals

[cashishift]

The last tool I bought was these.. for my sawzall. Pruning blades, 3 of em for 11 bucks.
Cheaper than a pruning saw!

 

[pacsguy]

very nice tools !!!! Do you have a larger pic of the Wera VSM tips ?
The Felo´s come with a sliding magnet inside the socket ?

Per your request! Hope these illustrate the VSM tips well enough for you.

<a href="http://www.flickr.com/photos/63611986@N08/5783448654/" title="VSM tips by pacsguy, on Flickr"><img src="http://farm3.static.flickr.com/2553/5783448654_4e77135533.jpg" width="500" height="375" alt="VSM tips"></a>

<a href="http://www.flickr.com/photos/63611986@N08/5783447062/" title="VSM tips 2 by pacsguy, on Flickr"><img src="http://farm3.static.flickr.com/2156/5783447062_72b968f9f1.jpg" width="500" height="375" alt="VSM tips 2"></a>

Also here is what the magnet looks like inside the 13 mm nutdriver. There is a spring mechanism that obviously withdraws the magnet back up inside.

<a href="http://www.flickr.com/photos/63611986@N08/5782895487/" title="Felo M-tec Metric Nutdrivers by pacsguy, on Flickr"><img src="http://farm6.static.flickr.com/5141/5782895487_d1215d353a_z.jpg" width="640" height="480" alt="Felo M-tec Metric Nutdrivers"></a>

 

[Monte]

Per your request! Hope these illustrate the VSM tips well enough for you.

Also here is what the magnet looks like inside the 13 mm nutdriver. There is a spring mechanism that obviously withdraws the magnet back up inside.

Thank you very much for the pictures !

 

[speed bump]

Last order from Cripe, man I can't help myself I keep buying stuff that I can't even tell you what I will use it for because its so cheap.

Case in point this last order. Wanted an 11 and a 16mm gear wrench to finish off my set from 10-19mm and then happened to stumble onto the Napa digital 1/2" torque wrench for $110. Little while later another $400 order happens:

Big wrench is a KD 1-5/8" that was stupid cheap, the big gearwrench is 34mm, and the two medium combo wrenches are 25mm and 29mm.

 

[sarel.wagner]

A few more toys delivered, some more on their merry way It's pathetic I know, but buy we keep on buying....

Body file holders, DHC2000 Oxy kit and a gas saver with pilot light, no need to put down a burning torch and it cuts the gas flow with just the pilot burning, allowing easy re-light.

Rgrds

 

[dfmkevin]

I just purchased these off the MAC truck. I think I did o.k. price wise, $200 for the 9 piece Metric and the 7 piece SAE

 

[gnx547]

Matco 0 degree offset, flex ratcheting XL long wrenches, wow that was a mouth full. They came in today and I love them so far.
<a href="http://s1209.photobucket.com/albums/cc399/knocker10/?action=view&current=IMG00151-20110530-1548.jpg" target="_blank"><img src="http://i1209.photobucket.com/albums/cc399/knocker10/IMG00151-20110530-1548.jpg" border="0" alt="Photobucket"></a>

How much did you pay for that set?

 

[sarel.wagner]

Gearwrench Imperial X beam reversable, Harris Argon flow meter, Stanley Fat Max Imperial/Metric rule, Small Leatherman Scissors and Ernest wrench organizers arrived

Rgds

 

[sscustom]

here mine new bandsaw
https://www.machineryhouse.com.au/viewImage.php?id=6111&imageNumber=0

 

[ekuhn]

Here's mine. LXT407 - and just submitted for the MIR free 6 1/2" Cordless circular saw. Replaces my old Dewalt 14.4 XRP screwgun. The batteries took a dump a while back and $150 for new and $115 for refurbished just didn't seem worth it, plus with this I gained Lithium Ion batteries and the rest of the tools.

 

[GBNZ]

Craftsman tools+Toys lol

Buying trip less than 2 weeks ago in Los Angeles California

 

[Don 18]

These just showed up from the boards classified section:

 

[JMLoughrey]

I just purchased these off the MAC truck. I think I did o.k. price wise, $200 for the 9 piece Metric and the 7 piece SAE

I've had the 9pc metric set going on 3 years now, i use them daily. Comfortable, stong and color coded. Only downfall is within time, you'll cut open the nice colored shrink wrap on your commonly used ones. My 7,8,10mm dont have any color left. Thats why they make colored electrical tape

 

[GBNZ]

Forgot to ad these also from craigslist.

 

[GStaz]

These just showed up from the boards classified section:

Nice purchase!

 

[archirelic]

Craftsman tools+Toys lol

Buying trip less than 2 weeks ago in Los Angeles California

GBNZ: why so many duplicates of the craftsman merchandise?

 

[GBNZ]

Onseller of USA made tools across the pond!

 

[dime]

just got these today radiator pressure set with vacuum operated filler set up, and some OTC hose crimp pliers.

 

[archirelic]

Onseller of USA made tools across the pond!

Figured it was a situation like that!

 

[gnx547]

Dime, what brand is the radiator pressure tester?

 

[Jure]

These just in: NWS ErgoCombi pliers, Felo wooden handle screwdriver set, CP 3/8" Air ratchet promo kit, Russian 24h watch

Rgrds

gloves are sick!!!

 

[dime]

Dime, what brand is the radiator pressure tester?

its astro pneumatic im not sure who the oem is but everything works well. it was the most complete kit i could find from anybody. I used it on a few different vehicles yesterday and it works great and the vacuum style purge/fill setup is pretty cool and works well also.

 

[knocker]

How much did you pay for that set?

$360, my matco guy is really good about working w/ you on pricing.

 

[Notwerk]

Inspired by the forum, I've been upgrading my tools. I'm slowly trying to get rid of my PRC stuff, and move on to better quality tools. These are today's arrivals.

Blackhawk 3/8 and 1/4 ratchets (USA of global components)

Wera Kraftform Kompakt 40 (Czech Republic)

Grip-On curved jaw pliers, 7" (Spain)

Channellock Griplock pliers, 9.5" and 6.5" (USA)

Crescent adjustable, 8" (USA)

Something funny going on with the Blackhawks, though. They don't seem to have as short an arc as billed (I counted 41 clicks for the 3/8 and 45 for the 1/4, which certainly doesn't work out to the sub 5 degree arc they advertise. They also don't have the tri-wing selector that's pictured in every Blackhawk catalog. Almost seems like these are single pawl, and not the double pawl it's supposed to have. If anyone has insight, let me know. I plan to contact Stanley about it and see if I can get some answers).

 

[smalltruck]

I bought a Streamlight Knucklehead setup. Got the light, the piggyback charger, 12vdc power cord, 120vac power cord, extra battery, and the akaline battery adapter. It has a damn good magnet and a hook plus the head swivels and rotates. Yeah it was damn spendy but I have to admit it's great.

 

[pdizzleinmt]

Just got the snapon 14.4 drill, impact and 2 of the led lights

 

[cashishift]

Last order from Cripe, man I can't help myself I keep buying stuff that I can't even tell you what I will use it for because its so cheap.

Case in point this last order. Wanted an 11 and a 16mm gear wrench to finish off my set from 10-19mm and then happened to stumble onto the Napa digital 1/2" torque wrench for $110. Little while later another $400 order happens:

Big wrench is a KD 1-5/8" that was stupid cheap, the big gearwrench is 34mm, and the two medium combo wrenches are 25mm and 29mm.

Cripe, never heard of it, link?

 

[fr0mastaj]

Cripe, never heard of it, link?

www.cripedistributing.com

WARNING.... once you look for stuff to make shipping 'worth it'....game over man...that how you end up with that picture.

 

[Don 18]

www.cripedistributing.com

WARNING.... once you look for stuff to make shipping 'worth it'....game over man...that how you end up with that picture.

+10 I'll snap of pic of my order when it shows up

and a PSA -- there are different items in their eBay store, and they will happily combine the shipping with your store order

 

[ricleh]

NWS pliers ordered from ash95608 on Monday - picked up on Friday.

NWS pliers ordered from Chad's Toolbox that took over 3 months to receive after payment.

More pliers purchased from ash95608 and other sources

 

[dsaabm]

ricleh- Great collection. What kind of tool cart is that? Thanks

 

[Monte]

@ricleh:
wow nice !!!
Ricleh - The master of exotic tools
If you like something you buy everything First all Nepros tools - now all NWS pliers
Very good !

 

[ricleh]

ricleh- Great collection. What kind of tool cart is that? Thanks

It is a KTC SKT23-M Easy Buggy. It is a Japanese version of the Hazet Assistent 166N, but is a bit larger and heavier. Here is a link to some information.

Kyoto Tool Co. movable tool storage

 

[blue dog]

I second ash for NWS, excellent service. getting my second order this week.

 

[noggin]

Here is my latest garage sale finds from today. A Porter Cable model 363 belt sander. The front knob was broke but I ordered one for about $10. Only paid $5 for the sander.
The Jorgensen clamps, 2 #3718 and 2 #3724 paid $5.
Really needed all of these finds.
Noggin is pretty happy about that,
Cheers!

 

[not-required]

Just got these today:

 

[fr0mastaj]

I've had that makita set for a while now. LOVE it. You took off the belt hook on yours? or do they not come with them anymore?

 

[GTO]

I second ash for NWS, excellent service. getting my second order this week.

Third for ash,got the exact two from him as well.

 

[blue dog]

New order from Ash arrived., few at a time.

 

[not-required]

I've had that makita set for a while now. LOVE it. You took off the belt hook on yours? or do they not come with them anymore?

I took off the hooks. With them on it didnt allow them to fit laying down in my drawer