Show your new tool arrivals

[wannab20hatch]

Sorry for the quality only camera i have at work is my cell

Got the wire strippers for free pwz 1 2 best tool i have ever bought

Is that an importatlanta sticker I see?

 

[bobbyg313]

Is that an importatlanta sticker I see?

good eye (before it sucked)

 

[odelay01]

I just got the 1/2 inch thin profile Craftsman ratchet tonight! I got it when I turned in an old ratchet for warranty. It seems to be pretty well built, but from Taiwan.

 

[wchamberlain]

I dig these. Where, how much?

Got the 1/4 set here:

http://www.ebay.com/itm/400265399881?item=400265399881&viewitem=&vxp=mtr#ht_2369wt_1139

Got the 3/8 set from the same guy, can't find the listing. Sunex #3342. http://www.sunextools.com/search.php?cat=impact-sockets&n=1&sunex1=set

Got the 1/2 sets here:

http://www.ebay.com/itm/13054136542...pagename=STRK:MEWNX:IT&vxp=mtr#ht_1496wt_1270

http://www.ebay.com/itm/11050373661...pagename=STRK:MEWNX:IT&vxp=mtr#ht_1494wt_1270

Like I stated for a DIYer, more than I'll ever need, got the 1/4, 3/8 and 1/2 wobble extensions as well.

 

[Dillithium]

Stahlwille multifunctional T-wrench, for screwbits and 1/4'' sockets.
I feel that this might be one of my best purchases yet!

 

[krijnen]

true, one of my favorites, great to have in your pocket

 

[Dr.JohnnyFever]

 

[nisreo]

Fresh off the mac truck to replace my HF junk. Cobalt bits warrantied from 1/4 up.

Sent from my Android

 

[volunteers]

I was thinking to buy that HF set. Is it junk from your experience?

Fresh off the mac truck to replace my HF junk. Cobalt bits warrantied from 1/4 up.

Sent from my Android

 

[onelochevy]

Some goodies from northern tool. 3/8 metric deep, 1/4 SAE & metric deep sockets and a couple ratcheting combo. wrenches to add to my craftsman set.

 

[wannab20hatch]

good eye (before it sucked)

Exactly why I rarely log on anymore

 

[nisreo]

It was definitely worth the seven dollars I paid for it, but the bits break very easily and they go dull after the first inch or so of drilling into steel.

Sent from my Android

 

[csmitty]

Well went to give him my techangle to send it for repair and tried real hard not to walk off with something.......but you know.

Buy a glass get a free ratcheting screwdriver

 

[jeffmoss26]

St Patricks day screwdriver?!

 

[canuckian]

Thanks to member Osborne.ozzy I was able to purchase a few items from the Cornwell truck while on vacation in SC. He didn't have a lot of what I was looking for in stock but I did manage to make a few impulse buys. The dealer was a great guy and he even threw in a swivel connector as a freebie. Got to meet "ozzy" in person as well. Dropped by his place of work after I was done on the Cornwell truck. Super guy and I even got to see him and his tools in action! Thanks again ozzy for hooking me up with your tool guy!
A couple pics...

 

[wchamberlain]

New Matco deleveries

5 in Matco branded Knipex
Extra long radiator pick
6 piece precision torx screwdriver set
digital tire gauge
Magnetizer/Demagnetizer
3 inch 1/4 ratchet
4 in 3/8 ratchet

 

[csmitty]

St Patricks day screwdriver?!

Yes sir. Even has PAT in the part number. Guess I'm a collector now. Dark green and Black

 

[canuckian]

Craaap...another ratcheting screwdriver. Hope my dealer got some in!

 

[RobertMo1988]

Craaap...another ratcheting screwdriver. Hope my dealer got some in!

you know... if you keep buying them.... they will keep making them... lol

 

[canuckian]

you know... if you keep buying them.... they will keep making them... lol

Very true indeed.....those evil Snap On marketing geniuses have created one vicious circle!! Ah well, like I always say...cheaper than buying crack!

 

[volunteers]

New Matco deleveries

Have you tried the Magnetizer/Demagnetizer? I was looking around and most products have problem with Demagnetizer. How about this Matco one?

 

[plung]

So didnt exactly buy this. But dammit this handy, and i consider it a tool

What is that? Is that a telephone cable?

 

[JMcFly]

Some goodies from northern tool. 3/8 metric deep, 1/4 SAE & metric deep sockets and a couple ratcheting combo. wrenches to add to my craftsman set.

Is Titan a good buy?

 

[wchamberlain]

Is Titan a good buy?

Joe,

I have there finger ratchets in all 3 sizes, no complaints so far!

 

[blue dog]

So didnt exactly buy this. But dammit this handy, and i consider it a tool

Me not knife sharpest in da drawer, but me would kindly like to know what you do with this if it handy be.

 

[plung]

Me not knife sharpest in da drawer, but me would kindly like to know what you do with this if it handy be.

Its a tractor tread cleaning device

 

[dieselmike]

blue orange green brown slate white red black yellow violet..... rose aqua

 

[dayid]

My new Craftsman 1/2" & 1/4" modules arrived today. Now just need to find someplace to keep 'em.

 

[jvitez]

blue orange green brown slate white red black yellow violet..... Rose aqua

roy g biv?

 

[shoturtle]

Just got this delivered. This little Proxxon kit is going in my car and will be pack on long bike rides.

 

[bart1]

roy g biv?

LOL! Was thinking the same thing!

 

[osborn.ozzy]

Thanks to member Osborne.ozzy I was able to purchase a few items from the Cornwell truck while on vacation in SC. He didn't have a lot of what I was looking for in stock but I did manage to make a few impulse buys. The dealer was a great guy and he even threw in a swivel connector as a freebie. Got to meet "ozzy" in person as well. Dropped by his place of work after I was done on the Cornwell truck. Super guy and I even got to see him and his tools in action! Thanks again ozzy for hooking me up with your tool guy!
A couple pics...

Your welcome! I would do it again anytime!

I was hoping you were going to post some pictures! If you want we could setup a mock drug ring, you send me hortons and I could send you tools.

 

[canuckian]

Your welcome! I would do it again anytime!

I was hoping you were going to post some pictures! If you want we could setup a mock drug ring, you send me hortons and I could send you tools.

Lol... Sounds like a plan! We could get Bubbles and the rest of the trailer park boys to mastermind the whole operation! Should go smoothly for sure!

 

[jeffmoss26]

csmitty can you post some more pics of the screwdriver?
dieselmike, fiber optic cable color code?

 

[jeffmoss26]

got a pair of channellock long nose from stopdroplol and a usb flash drive/pipe wrench from RIDGID. I saw one online from a trade show and sent them an email asking if they could send me one, and it showed up in the mail yesterday

 

[osborn.ozzy]

Lol... Sounds like a plan! We could get Bubbles and the rest of the trailer park boys to mastermind the whole operation! Should go smoothly for sure!

Like the Swayze express ehh?

 

[csmitty]

csmitty can you post some more pics of the screwdriver?
dieselmike, fiber optic cable color code?

Will do when I get back home. It didn't have any cool st patty day writing on it though. Just green. It did however have a Phillips #3 instead of a T15 like the one i got before. Not sure if thats across the board or not though.

He had two more yesterday. Gonna track him down today to swap out a hammer.

That rigid flash drive is awesome, they just sent you one?

 

[jeffmoss26]

Yup! It's only a 1GB so maybe I can modify a larger one to fit.

 

[otis66]

My new Spyderco Native 5, and new Zippo solid brass.

 

[csmitty]

Traded in my red hammer for an orange one today. Might have to get the 16 and 32oz