jeffmoss26
Well-known member
Interesting prybar...got a part number?
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
straight blade prybar:
http://buy1.snapon.com/catalog/item...roup_ID=682723&store=snapon-store&dir=catalog
http://buy1.snapon.com/catalog/item...roup_ID=682723&store=snapon-store&dir=catalog
My old dealer suggested I buy one since I would warranty my large flat head on a regular basis. Works much better.
Sent from my ADR6400L using Tapatalk
jeffmoss26
Well-known member
I use my 3/8 x 12 Craftsman flathead as a prybar for replacing handles on SO screwdrivers 
blue dog
Banned
jeffmoss26
Well-known member
Is that stuff from Harry Epstein?
canuckian
Well-known member
Took about a month but I finally got my order from blackrocktools.com. The bench grinder, though made in china, is a nice unit. Runs up smooth and no vibrations whatsoever. Can't comment further as Its not bolted down and I haven't really tried it on anything yet. The milwaukee 3/8 ratchet is the ****! Way more torque than I expected and very comfortable. Can see it coming in handy for sure. 
How do you like these? I was pondering getting the cheaper version of these
http://images.izideal.com/img/product/8092330/l/uk/bahco-808050p-pistol-ratchet-screwdriver.jpeg[/MG][/QUOTE]
I have a Cornwell one of those, and it is a nice ratchet driver. The "magazine" for the bits is pretty cool.
[IMG]http://i13.photobucket.com/albums/a269/Mrjunior/Tools/IMAG1326.jpg
osborn.ozzy
Banned
Took about a month but I finally got my order from blackrocktools.com. The bench grinder, though made in china, is a nice unit. Runs up smooth and no vibrations whatsoever. Can't comment further as Its not bolted down and I haven't really tried it on anything yet. The milwaukee 3/8 ratchet is the ****! Way more torque than I expected and very comfortable. Can see it coming in handy for sure.
Ive been thinking about getting that same ratchet
canuckian
Well-known member
Haven't used it yet besides playing around with it but I can see it being used quite often. A lot easier than dragging out the air setup to zip off a few fasteners. I have a fairly complete m12 setup anyways so this was just the natural choice for me.
bobemmerich
Well-known member
Just in today from Cripe:
U.S.A. made K-D Tools 12mm, 17mm, 3/8-1/4 reducer. Also a K-D Tools storage bag. Figured I'd use it to put clothes in on a trip (aggravates the wife ) I used to have a large Ryobi Tools bag like it, but the zippers went south. That thing would hold a weeks worth of clothes.
U.S.A. made K-D Tools 12mm, 17mm, 3/8-1/4 reducer. Also a K-D Tools storage bag. Figured I'd use it to put clothes in on a trip (aggravates the wife
) I used to have a large Ryobi Tools bag like it, but the zippers went south. That thing would hold a weeks worth of clothes.Attachments
blue dog
Banned
The snips and ratchet are from Epsteins
Squints
Well-known member
Snap On man was in today. Got the 3/8 impact swivel set ( buy the metric/get the standard) for half price!
I guess he wanted rid of it... Paid $255!
Also my order came in.
S9615a wrench... 15mm and 9/16" box end on the same wrench... Great for oil changes....
Blue point jiffy connector disconnect set... For gm transmission lines.
He threw the light in for free because I spent good money...
He picked it up at Costco..... They aren't available through the truck.
I guess he wanted rid of it... Paid $255!
Also my order came in.
S9615a wrench... 15mm and 9/16" box end on the same wrench... Great for oil changes....
Blue point jiffy connector disconnect set... For gm transmission lines.
He threw the light in for free because I spent good money...
He picked it up at Costco..... They aren't available through the truck.
Attachments
DanCo
Well-known member
Is that free light is on your invoice? For warranty purposes, of course. Seeing as it's not an actual Snappy product.
I have 2 of those lights I got from HD.
Dan
JayL
Well-known member
Bosch 3-28 Rotary Hammer Drill Chisel
JayL
Well-known member
2 ?!
For car repair ?
Got 2 for $430 ( is it a good deal? ). One for my friend and one for me ...
For shop and home use. Sometime concrete drilling using a regular hammer drill can be quite a challenge for the bigger bits. I hope this rotary drill will now make it easier.
Last edited:
Got 2 for $430 ( is it a good deal? ). One for my friend and one for me ...
For shop and home use. Sometime concrete drilling using a regular hammer drill can be quite a challenge for the bigger bits. I hope this rotary drill will now make it easier.
wow 215 per tool is very good
Where did you find them ?
The list price in Germany is $ 410.- for one tool
http://www.bosch-professional.com/d.../16876/bohrhaemmer-mit-sds-plus/gbh-3-28-dre/
it should make your life much much much easier !
Wow, what are the prices in canada? The metric set lists for 272 here.
blue dog
Banned
Squints
Well-known member
It lists for $309 here. But If you punch the part # in for the kit I got (207IPFMXIPF)
it comes to $510. So I don't know where the buy one get one free comes in?
But I did get the whole kit for $55 dollars below retail of the metric set. So I got a deal none the less!
Last edited:
jjjrmx5
Well-known member
From eBay:
What's ya pay for the Blue Point bit driver Cap'n Rob?
Blue Point screwdrivers, bit drivers and ratcheting screwdrivers are some of the tools tha have most disappointed me in the past while coming with a hefty and often unjustifiably high price.
I'm curious to see how it holds up.
FancyLearnin
Well-known member
Just got my monster breaker bar from Princess Auto:
...Sunex brake caliper master set:
... SK 3770 ratchet and $10 Jegs mat.
Not a bad day's haul...
...Sunex brake caliper master set:
... SK 3770 ratchet and $10 Jegs mat.
Not a bad day's haul...
Last edited:
I got mine too from Northern ... but it was just an empty box. They are sending me another one.Just got my monster breaker bar from Princess Auto:
JayL
Well-known member
wow 215 per tool is very good
Where did you find them ?
The list price in Germany is $ 410.- for one tool
http://www.bosch-professional.com/d.../16876/bohrhaemmer-mit-sds-plus/gbh-3-28-dre/
it should make your life much much much easier !
We got some 20% coupons from a Bosch seminar. It's valid on top of the best dealer discounted price we can find. We decided to go for 2 rotary drills
Bosch Philippines is aggressive on it's marketing now a days. Twenty five people showed up on that particular seminar and they gave each person an 18V Drill Driver and the 20% coupon.
Yea that is kinda strange. Says 456 here. Not really a promo if your just buying both sets. If you had gotten half off the metric set and gotten the sae free that would have been a sweet deal. Still not bad though.
We got some 20% coupons from a Bosch seminar. It's valid on top of the best dealer discounted price we can find. We decided to go for 2 rotary drills
Bosch Philippines is aggressive on it's marketing now a days. Twenty five people showed up on that particular seminar and they gave each person an 18V Drill Driver and the 20% coupon.
WOW what a hell of a deal !!!
Is there another seminar in the future ?
Warm weather and free Bosch tools
I think i move to the Philippines 
mlittle29
Well-known member
New stuff...
canuckian
Well-known member
FAR72CO
FAR72CO
Hey Canuck, that's pretty sweet. How do you like it? Is that an orange boot?
canuckian
Well-known member
Thanks...haven't had it hooked to air yet as I'm out of quick connectors at the moment. Maybe this weekend I'll be able to give er a whirl. I have However used a friends and it worked really well. And nope it's not a boot, it seems to be powder coated.
warmpancakes
Well-known member
how much was the orange set they are all over ebay at 250 I wondered what people were marking them up
FancyLearnin
Well-known member
Some driver goodness arrived on my doorstep today.
Wiha metric nutdriver set to go with the SAE set I already have:
Pratt-Read super stubbies:
And the piece de resistance, neon green Pratt-Read screwdrivers (only) from McMaster:
Wiha metric nutdriver set to go with the SAE set I already have:
Pratt-Read super stubbies:
And the piece de resistance, neon green Pratt-Read screwdrivers (only) from McMaster:
I got the socket/ratchet driver set on Tuesday. But my Snap-on man bought back the bit driver because I just bought one... So, I get the 1/4 driver, and socket set for about $150.
Pancakes- About $212, IIRC.