Show your new tool arrivals

[jeffmoss26]

Got these a few days ago...
Channellock 447 from Caleb T
Ridgid 8" pipe wrench from Mickey O.

 

[jvitez]

Day-um, but a small box of Snap-On stuff is expensive. But, me like! I finally took the plunge on SO ratcheting screwdrivers. Very, very nice! I'll break them in finishing a bit of electrical work in the garage.

Air grease gun is made in Taiwan. It looks the same as many other brands. For $30, I figured it was a worthwhile purchase when running a whole tube of grease into my tractor.

I've also finished filling in the gaps of an SK impact socket set. SK and SO sharing the same socket holder: made in USA alliterative goodness!

My Dodge Ram 5.9 Cummins has a pipe plug fitting in the oil drain plug. The socket extension never fits quite right, so I thought I'd get the individual 3/8 pipe plug socket, then one thing led to another and......

"Hello, my name is jvitez and I'm a tool-a-holic."

 

[jvitez]

One more Princess Auto purchase. Lighter is for my weed burner. For $9 I don't have to wreck a nice Zippo, nor futz with a spark igniter.

 

[Tomato]

[/URL]

 

[B18c_tuner]

Very nice. This is the newest model correct? How much did it cost you if you don't mind me asking?

 

[rmsg0040]

Went to princessauto this morning, got the plugs for $2 a piece (huge bin of them there) and a ball joint press kit for $40. Did the front u-joint on my trailblazer this morning. Worked well.

 

[angzt]

Picked these bad boys up on eBay. $170 Shipped
They are great and I'm as happy as a pig in sht right now!!

3/4" - 2 1/2"

I need... 1 1/8" , 1 3/16" , 1 1/4" , 1 5/16" , 1 1/2" to complete the set though.

 

[RedFordTruck]

The other day I was at Northern tool and saw they had a 3 piece Channellock Griplock set priced at $22.99. Well it turns out they were supposed to be priced $29.99 but I got them at the $22.99 price and slapped down a $5 off $15 coupon and Walked out with this set for a cool $18!

 

[Syndicate]

Warranted a few things today and got me a new ratchet!

[/IMG]


Sent from my iPhone using Tapatalk that iTyped with my ****** iThumbs

 

[tjmonsen5]

This FHLF80 was backordered when i purchase a few tools about a week or so ago. Arrived on my doorstep today. It is BEEFY! I put it next to my "long handle" 3/8 Mac which was my favorite until now.

 

[nine4gmc]

Freakin Thanks to the HOT DEAL section!!!

 

[illmatyk]

The other day I was at Northern tool and saw they had a 3 piece Channellock Griplock set priced at $22.99. Well it turns out they were supposed to be priced $29.99 but I got them at the $22.99 price and slapped down a $5 off $15 coupon and Walked out with this set for a cool $18!

Nice deal! I got the 2 piece set about 2 months ago and paid $25 for it. $18 for the 3 piece set is really a good deal!

 

[chris6278]

The other day I was at Northern tool and saw they had a 3 piece Channellock Griplock set priced at $22.99. Well it turns out they were supposed to be priced $29.99 but I got them at the $22.99 price and slapped down a $5 off $15 coupon and Walked out with this set for a cool $18!

I luv those griplock pliers. They grip like a pitbull!

 

[jeffmoss26]

Got some more goodies last night-
Pocket screwdrivers from metaldad, Ideal VDV tester and Crescent wrench from Mickey O.

 

[Chadwilliam1]

1/4 drive 15 mm 6 point deepwell. Proto has the best looking chrome IMO.

 

[osborn.ozzy]

IR 326
this thing looks like a bad mofo

 

[WallynSC]

Someone mentioned that the smaller ball pein handles were harder to find, so I thought I would check a hardware store in the next community.

View media item 22550
6 n1 one screwdrivers no COO.

 

[NMIwrench]

new as of last week

 

[goodspeed]

Don't have any photos currently, but I go to pawn shops a LOT, and today I picked up:

A pair of knipex cobra pliers (like channel locks)
a 60mm wrench (don't know why I needed it, but it was huge and neat)
a blackhawk 1 1/4" open end on one side 1 1/8" open on the other side wrench.
a few more c clamps (I buy all I can find)
a pair of bluepoint diagonal pliers
and some other assorted craftsman sockets.

Set me back 5 bucks (I get the regular-customer discount, to say the least).

Also picked up a staedtler drafting set. It's a 35 or so piece set that itt tech drafting and design students are required to purchase. Cost me 25 out the door. I'd wanted a few of the pencils and templates in there for a bit, so I'm happy with that.

 

[Anotherrcguy]

I just added the SHLF80A, Found a different Snap On guy and he hooks me up with the new ratchet

 

[jjjrmx5]

Don't have any photos currently, but I go to pawn shops a LOT, and today I picked up:

A pair of knipex cobra pliers (like channel locks)

If they are like the Chanel Locks, they are likely Alligators and not Cobra's. Cobra's have the chrome button on the side to allow qucik and easy adjustment. Alligators are like std. arc joint pliers and you need to manualy adjust them.

Big difference in price. Still awesome tools.

 

[concealer404]

JZT hooked me up!!!

 

[Chadwilliam1]

niiiice

 

[e-tek]

A Princess Auto X-mas in August!!!

 

[goodspeed]

If they are like the Chanel Locks, they are likely Alligators and not Cobra's. Cobra's have the chrome button on the side to allow qucik and easy adjustment. Alligators are like std. arc joint pliers and you need to manualy adjust them.

Big difference in price. Still awesome tools.

No, they're the cobras. Have the button and say "cobra" on them. I just use channel locks interchangeably to describe all pliers of that general shape. Lol

they're the knipex 87 01 300 that look like this:

 

[tjmonsen5]

Bluepoint reversible ratcheting stubbies 8-19mm.

 

[jeffmoss26]

Got some parts from Snap-on last night...three different color reversing caps for ratcheting screwdrivers (just in case) and a replacement awl blade. I had an extra orange mini handle, so now I have another orange awl!

 

[Chadwilliam1]

Bluepoint reversible ratcheting stubbies 8-19mm.

what is the COO and how much did those cost? if you don't mind me asking.

 

[tjmonsen5]

Unfortunately they are Tiawan, but Snap-on does not make its own ratcheting stubby.

 

[Chadwilliam1]

I am looking for a good USA made stubby set, does not have to ratchet but for the right price would be nice.

 

[Syndicate]

A Princess Auto X-mas in August!!!

There will be a large PARTY at E-Teks BYOT (bring your own tools)
That is a nice set up, and I dig that last tool pictured!!

Got some parts from Snap-on last night...three different color reversing caps for ratcheting screwdrivers (just in case) and a replacement awl blade. I had an extra orange mini handle, so now I have another orange awl!

What no green? How much they charge for the caps btw?

 

[Ft.ValloniaStreaker]

they're the knipex 87 01 300 that look like this:

[/QUOTE]

Man I love these things...Sears of all places had them on sale for $19.99!

 

[DFW-LSX]

TL72

Sent from a rotary payphone using Tapatalk

 

[chris6278]

Needed a new compression tester to keep at home. Really like this craftsman one. Lots of extra hoses an adapters. Its also as accurate as my matco one i have at work

 

[dsmnickk90]

I am looking for a good USA made stubby set, does not have to ratchet but for the right price would be nice.

Armstrong has a USA made stubby ratcheting set

 

[Ovalinaz]

Picked This up from my snap on guy yesterday

He had it for a warrenty but the person Had theres rebuilt so i got this one!
and this thing is Great to use!

 

[Wine-o1]

I picked this up yesterday off craigslist. I paid $60 for it which I thought was fair, and the best part was it was made in the USA.

 

[Skin]

Unfortunately they are Tiawan, but Snap-on does not make its own ratcheting stubby.

yes they do, they just arent reversible.

 

[tjmonsen5]

yes they do, they just arent reversible.

ya thats what i meant to say

 

[Tomato]