Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
The FedEx man showed up today. What a nice guy.
Thinking about ordering those flex sockets. It bugs the hell out of me though that they aren't even in pieces
Chadwilliam1
Well-known member
What do you mean pc pain?
Matt_C
Well-known member
Well, I picked this up today;
A proper heavy duty telescopic vice mount for my van. Sadly I didn't have the measurements before purchase, and after a couple hours outside sweating and swearing, it ain't gonna fit! There's loads of places it *could* fit, if I had another few inches here, or a few inches there, but my van is so tightly packed as it is, to get it to fit in a workable position, I'd end up sacrificing too much space I need for other things. Curses!
However, it was only cheap, so I'll just relist it on eBay and hope I can sell it for a few quid more than I paid, so as to break even after the fuel cost going to pick it up.....
A proper heavy duty telescopic vice mount for my van. Sadly I didn't have the measurements before purchase, and after a couple hours outside sweating and swearing, it ain't gonna fit! There's loads of places it *could* fit, if I had another few inches here, or a few inches there, but my van is so tightly packed as it is, to get it to fit in a workable position, I'd end up sacrificing too much space I need for other things. Curses!
However, it was only cheap, so I'll just relist it on eBay and hope I can sell it for a few quid more than I paid, so as to break even after the fuel cost going to pick it up.....
dR_Freightliner
Well-known member
Is there a snap-on tool thread? I can't seem to find any.
The SAE set has less sockets than the Metric set. It's one of those weird things that bother me
JBradley500
Well-known member
- Joined
- Jul 19, 2013
- Messages
- 781
The nice thing is the SAE is much cheaper. I spent like 65 bucks for both I think.
JustinsGr8
Well-known member
Last edited:
JustinsGr8
Well-known member
FOCUS.FREAK
Well-known member
7 SAE vs 16 metric
My hf impact set came with like 13 standard and 10 metric.
Sent from my SPH-L720 using Tapatalk
dR_Freightliner
Well-known member
Start one...If you want just let me know and I'll start it.
start it .. I'm still a rookie.
upgrading
Well-known member
Snap-on **** is color coded.
Here are a couple.
http://www.garagejournal.com/forum/showthread.php?t=97311
http://www.garagejournal.com/forum/showthread.php?t=140268
This arrived yesterday morning. It's 15" Grizzly planer that belonged my Step-dad's brother and father. Since my Step-uncle passed last week, I was given this out of his shop. The roller stand was built by my step-grandfather. It uses a set of wheels off an old corn planter and a pivoting axle.
85FourEyedGT
Well-known member
I LOVE locking extensions, looks like you've got every base covered with that purchase!
Zeroek - I got these thru my student program from school. I LOVE it here. I live in a neighborhood with lots of old people. Its quite and peaceful.
Coolguy83 - My snap on guy is in Washington D.C. Name is Eric Franco.
85FourEyedGT - I was tired of my spark plug socket staying in the engine. At first I was only going to buy 3/8 drive, but then It became more of an impulse buy.
Coolguy83 - My snap on guy is in Washington D.C. Name is Eric Franco.
85FourEyedGT - I was tired of my spark plug socket staying in the engine. At first I was only going to buy 3/8 drive, but then It became more of an impulse buy.
MikeF2316
Well-known member
Got these 5 sets of locking extensions about an hour ago. Cant wait to use em at work tomorrow. Also got an air hammer and 1/4 universal sockets that are on their way.
Now, if you put them all together, you can work on cars in the next bay!
I got this (not my picture but it looks exactly like it)
You'll like it. I've been using the hell out of my 1/4 version for the past week.
Sent from my SAMSUNG-SM-N900A using Tapatalk
smoking stroker
Well-known member
This thing is awesome
Sent from my SM-G900P using Tapatalk
Sent from my SM-G900P using Tapatalk
It's chunky but I've been using it to R&R the dash in my F150. Has worked perfectly except for a couple of fasteners that were almost impossible to get to no matter what the tool was
This thing is awesome
Sent from my SM-G900P using Tapatalk
Have that saved in my home depot tool wish list
smoking stroker
Well-known member
Have that saved in my home depot tool wish list
Yea ive been thinking bout buying it for months now. Finally bout it Friday. And used the heck out of it over the weekend. Bite the bullet and buy it ull be happy. I already had 4 of the xc batteries so all I needed to buy was the gun
Sent from my SM-G900P using Tapatalk
JustinsGr8
Well-known member
Milwaukee is doing it BIG... JustinsGr8
Well-known member
This thing is awesome
Sent from my SM-G900P using Tapatalk
Best bang for your buck right there....
Last edited:
davethorik
Well-known member
nickb
Member
just got an old snap on kr562 toolbox in REAL good shape. I was looking to coat the drawers with bedliner. I found a thread on this site and decided I wanted to join. wow I've seen so many really cool tools in one place before. I also just got a couple new trays of snap on stuff. I might have to post some pics myself.
superautobacs
Well-known member
Goldenrod Oiler:
Wilde punch holder:
Wilde punch holder:
Last edited:
Nice! Where from?
JustinsGr8
Well-known member
Where can I buy a bank for a dollar?
Fixed that...
I do all my replies from my phone. Sorry for the typos..
davethorik
Well-known member
I got it from the 'bay, and then saw I could have gotten it cheaper at Epsteins. Live and learn.
It's ok to use regular chrome sockets w these correct? It's not really an impact
Sent from my iPhone using Tapatalk