Newest arrivals
what are those relay looking things?
Show your new tool arrivals
- Thread starter sarel.wagner
- Start date
what are those relay looking things?
Lisle relay test kit. Plug it in line between the relay and the fuse panel so you have test points for your meter. I needed one the other day working on a dump truck.
http://www.amazon.com/dp/B002MCX6LY/?tag=atomicindus08-20
StackedDodge96
Well-known member
Went against my OCD and got the 1/2 Dr. meteric set of wobbles from our independent tool guy today. Still thinking I should have got the sunex 12pts to match all my other ones. Maybe Ruger wont flame me to hard...
Also got a free rachet!
Also got a free rachet!
jfcasey
Well-known member
Those are pretty much identical to the sunex version minus the stamped sizes if that helps ya any.Went against my OCD and got the 1/2 Dr. meteric set of wobbles from our independent tool guy today. Still thinking I should have got the sunex 12pts to match all my other ones. Maybe Ruger wont flame me to hard...
Also got a free rachet!
Let me know what you think of the sunex 12 points if you get them. I need a 3/4 inch drive set of 12 points. I can get the cat branded ones for a good price but i'm sure the sunex are still cheaper.
MagnumForce
Well-known member
You don't work on industrial or agricultural applications, do you?
3/4 drive swivel sockets?
No 12 point sockets. I obviously misread his post.
Sunex 4687 is the ones i'm looking at.
Last edited:
Travisnd
Well-known member
Got these to add to the NOS collection!
stovebolt6
Well-known member
Stopped at Home Depot and remembered that I had to get a new multimeter. Don't need something like a Fluke so this Klein will fulfill my needs (basic automotive troubleshooting)
Also rooted through the rack and got the last set of made in USA Nicholson 6" files
Also rooted through the rack and got the last set of made in USA Nicholson 6" files
NorCalWrenchin
Well-known member
Picked up a new FAR25, and a used one time EEFI500 master kit. Got the EFI kit for 300!
Also picked up a used, but in perfect condition 3/8 Snap on tq wrench to go with my 1/2"
Also picked up a used, but in perfect condition 3/8 Snap on tq wrench to go with my 1/2"
Hpozzuoli
Well-known member
There u are!! Haven't seen anything new from u in awhile!
Looks nice man!
Sent from my iPhone using Tapatalk
Dust Devil
Well-known member
Nice saw. Dewalt makes great saws.
Hpozzuoli
Well-known member
I am still around. Been pretty quite. I have been overly stressed trying to sell my house.
Anyone want a house in RI?
Anyone want a house in RI?
Last edited:
espyking83
Well-known member
JBradley500
Well-known member
- Joined
- Jul 19, 2013
- Messages
- 781
26mm 3/8" drive SK socket. It turned out that's the biggest 3/8" socket they make.
I bought used so I saved quite a bit over the price of buying new.
Wrapitinbacon
Well-known member
- Joined
- Oct 18, 2013
- Messages
- 136
Got these to add to the NOS collection!
I like those. Did Mac used to stock Channellock pliers like that?
JonnyMac
Well-known member
Ive avoided getting a cordless angle grinder but this was a bargain.
Its a little thick in the hand so if your hands are on the small size its probably not suited. On a full charge I ground down the ends of 15 lengths of 50mm square tube. Its got plenty of power and a nice flashing led when the battery starts to get low. Comes with a great disc too.
Its a little thick in the hand so if your hands are on the small size its probably not suited. On a full charge I ground down the ends of 15 lengths of 50mm square tube. Its got plenty of power and a nice flashing led when the battery starts to get low. Comes with a great disc too.
Attachments
Crown Imperial
Well-known member
<iframe width="480" height="360" src="//www.youtube.com/embed/yEyOOfdozsM" frameborder="0" allowfullscreen></iframe>
Old meter died on me... It was borderline on inconvenient testing 12v systems with a meter that would only read 33.** volts or 356 mv
I have one of this multimeter as well. Actually not too bad. Already been using it for about four years.
Just recently changed its battery for the first time, even though it's just a cheapo china made battery...
rshadd
Well-known member
Bosch PS21-2A Pocket Driver
Bosch CC2130 Clic-Change 27-Piece Drilling and Driving Set with Clic-Change Chuck
DEWALT #1, #2 & #3 Phillips 6-Inch Power Bits
Bosch CC2130 Clic-Change 27-Piece Drilling and Driving Set with Clic-Change Chuck
DEWALT #1, #2 & #3 Phillips 6-Inch Power Bits
Travisnd
Well-known member
It's my understanding that they did as I believe these came from an old Mac truck driver.
d-rive
Well-known member
The thinnest angle grinder on the market, Bosch GWS 7-115E Made in China 
and Bosch GST 160BCE (Swiss Made), the most powerfull jigsaw from Bosch and one of the best on the market and my first electric tool from Milwaukee, the M12 Hammer/Drill, Made in Germany.
and Bosch GST 160BCE (Swiss Made), the most powerfull jigsaw from Bosch and one of the best on the market and my first electric tool from Milwaukee, the M12 Hammer/Drill, Made in Germany.Attachments
MrJason
Well-known member
Liking my Tekton delivery today, more to come! 
kiatech
Well-known member
Last edited:
FOCUS.FREAK
Well-known member
Blue point torx and home depot allens.
-Jordan
-Jordan
DeliveryGuy
Well-known member
In the Gray Tools Canada promotional flyer, Knipex rebrands. They are MUCH cheaper than the Matco versions.
JonnyMac
Well-known member
Bosch PS21-2A Pocket Driver
Bosch CC2130 Clic-Change 27-Piece Drilling and Driving Set with Clic-Change Chuck
DEWALT #1, #2 & #3 Phillips 6-Inch Power Bits
Thats wierd. These identical tools are sold as 10.8v tools here in Oz!!
bodyguy16
Well-known member
^^^ that has something to do with minimum voltage requirements, my older makita is marked 10.8 and my newer on is a 12v. So 10.8v min and max of 12v. A real marketing hype i guess....