Show your new tool arrivals

[merbie]

Cat (Snap-On) combination wrench sets in metric and SAE. These will replace my Craftsman RP and DeWalt sets (I'm still quite fond of the DeWalts, though, so I'll find space for them somewhere in the box.)

Sent from my iPad using Tapatalk

Are they flank drive? And how much are thy if you don't mind my asking?

I'd rather close my **** in a car door than wear a headlamp.

 

[warmpancakes]

those are williams not snap on, older Cat stuff was made by snap on the newer is made by williams, yes same parent company but different plants for production.

 

[arms1970]

One of the electricians at work gave me a couple of these Klein 54447. I have already filled one up with electrical terminals. Got to work on this one now. They are new just a little dusty.

Sent from my iPhone using Tapatalk

Great holders. I got a handful when an ace hardware closed down.

 

[Skin]

those are williams not snap on, older Cat stuff was made by snap on the newer is made by williams, yes same parent company but different plants for production.

I was going to say something similar but those clearly have snap-on script and date codes.

 

[n8n]

I was going to say something similar but those clearly have snap-on script and date codes.

That step by the open end sure looks like Williams though... maybe they just adopted SO's date code system?

Sent from my XT897 using Tapatalk

 

[d-rive]

Just a Milwaukee hand tools.
First Milwaukee hand tools for me, they are good companion to electric tools from Milwaukee.

 

[Skin]

That step by the open end sure looks like Williams though... maybe they just adopted SO's date code system?

Sent from my XT897 using Tapatalk

If they're Williams they'll have 2 cut-outs on the top and bottom each (no fd+ teeth) and fatter beam width. Regardless of what they are, still great looking wrenches.

 

[ezgosparky]

New hammers 10% off on the truck.

 

[ladrones]

Cat (Snap-On) combination wrench sets in metric and SAE. These will replace my Craftsman RP and DeWalt sets (I'm still quite fond of the DeWalts, though, so I'll find space for them somewhere in the box.)


Sent from my iPad using Tapatalk

Did the dealer give you a discount?

 

[90zcar]

Got a straight on tire chuck. These are very very hard to find



Sent from my iPhone 5s using Tapatalk

 

[Jgibbs3718]

Did the dealer give you a discount?

They were a gift from a coworker.

If they're Williams they'll have 2 cut-outs on the top and bottom each (no fd+ teeth) and fatter beam width. Regardless of what they are, still great looking wrenches.

The physical construction of the wrenches appears to be closer to the Williams line (specifically the beam width...these things are beefy.)

 

[bahcoswed]

Its christmas again! My new stahlwille open box 14 long series combowrench 17pc 6-22mm set just arrived I put my open box 13 regular lenght wrench next to compare both series!

 

[Farmall450]

Got a straight on tire chuck. These are very very hard to find



Sent from my iPhone 5s using Tapatalk

Where are you located?
They're in every auto/farm & fleet around here.

 

[90zcar]

Most have the offset chuck comming off the back. I know snap on doesn't make one.

May be available at farm stores due to the fact a lot of skid loaders...equipment need this style


Sent from my iPhone 5s using Tapatalk

 

[Dave455]

Its christmas again! My new stahlwille open box 14 long series combowrench 17pc 6-22mm set just arrived I put my open box 13 regular lenght wrench next to compare both series!

Those are superb wrenches! Decent size set too!

I think the long series No.14 is about the best wrench Stahlwille make!

I was thinking of getting a set as I didn't have many Metric long series, but I was tempted into some Hazet instead after reading another thread! Love the Hazet, no regrets, and they match up with my old Britool combo's superbly, but the majority of my metric tools are Stahlwille, and they really do wear well!

Perhaps we should start a 'Show us your Stahlwille' thread!

 

[Monte]

Carhartt work hat

 

[warmpancakes]

Carhartt work hat

They are Made in Dearborn Michigan right by the rouge plant

 

[JonnyMac]

This^^^^^ could kick off a "show off your workshop clothing" thread!!!

 

[Bighead38]

and yes that's just a basic set for now, ill be adding lots more boys just wait and yes every single piece , tool, bit, holder etc will b snap on!

anyone have any chanel lock pliars? good, bad?

What happened to every tool being snap-on?

 

[90zcar]

What happened to every tool being snap-on?

I know right....he made sure enough to tell us he's only snap on snap on!! ....n then all of a sudden, what about channellock?

Haha


Sent from my iPhone 5s using Tapatalk

 

[nine4gmc]

He probably got his first bill from the friendly SO dealer and crapped his britches...

Hopefully he just got wise and put the kool aid down though.

 

[Tellingthem]

Surprised to see these in the local ace hardware. Just seemed a bit out of place for them. have no idea why I got them but they are pretty cool at least.

 

[vertguy]

Another USPS delivery... and more questions from my wife about why I needed more tools

Once again, the quality of older tools continues to amaze me as this Walker Turner miter gauge is nothing short of cool. Geared, indexed, heavy, self indexing and made of real metal. Way more than what I need, but the POS that came on my Dewalt broke the first time it hit the floor and this thing will be around long after me.

And a comparison to what it replaced!!

Also received a 6pt CM SAE socket set (bought a metric set last week).

 

[thesilverone]

Rigid 1/2" dr RHFT long handle ratchet

 

[MrJason]

Just picked these up, thanks to this tool addiction I've got.

These 160 tooth ratchets, because.. Why not?


And this handy kit I saw another member get on here.. Always wanted one.


Can't wait to try out the ratchets, and use the heck out of the service kit.

Jason

 

[ADSR]

Just picked these up, thanks to this tool addiction I've got.

These 160 tooth ratchets, because.. Why not?


And this handy kit I saw another member get on here.. Always wanted one.


Can't wait to try out the ratchets, and use the heck out of the service kit.

Jason

160 toof? those must scream!!

 

[thewatusi]

NOS KD 1/2 ratchet. USA. $12 on fleabay.

 

[stroked383z28]

My latest acquisitions!

And this is on the way!!!

 

[upgrading]

The set of 4 Gearwrench screwdrivers.
What is the COO ?
Did you get those from the Gearwrench hot deals section for $14.??.

 

[stroked383z28]

The set of 4 Gearwrench screwdrivers.
What is the COO ?
Did you get those from the Gearwrench hot deals section for $14.??.

COO is Taiwan. Yes got them from the hot deals on their website.

 

[upgrading]

COO is Taiwan. Yes got them from the hot deals on their website.

Thanks.
Interesting.

 

[kfainf]

Been eyeing the Bostitch 65pc pass thru socket set. I know they are China made, but seem to be decent quality for no more than I use them. Got them at decent price on e-bay.

 

[articsilber323]

Been eyeing the Bostitch 65pc pass thru socket set. I know they are China made, but seem to be decent quality for no more than I use them. Got them at decent price on e-bay.

link?
what is the biggest size socket?

 

[ADSR]

My latest acquisitions!

And this is on the way!!!

wow! That's a wallet workout!!

Congrats on the new goods!!

 

[Jd34]

upload image

Just showed up. I burned my last one up but I liked it so well that I thought I'd give Milwaukee a second chance on their reconditioned hammer drill..

 

[stroked383z28]

wow! That's a wallet workout!!

Congrats on the new goods!!

Thanks. Some were gifts and some were fleabay scores so not quite as bad on the wallet. List price for all that would be rediculous!

 

[mrsnapon]

didn't take him long to change his mind

To keep on topic, I've got a bunch of Channellock pliers and am quite happy with them.

snap on dosent make a very large pair of tounge n grove pliars , blu point does but im not buying china ****

 

[AA/FC]

One of the two sets I got off the truck today.

 

[90zcar]

snap on dosent make a very large pair of tounge n grove pliars , blu point does but im not buying china ****

Don't just assume blue point is made in china. Very little blue point is china made. There is a lot of USA blue point aswell as Taiwan...Spain and various other countries


Sent from my iPhone 5s using Tapatalk

 

[stroked383z28]

One of the two sets I got off the truck today.

Mmmm I want those!