Show your new tool arrivals

[TheRobotCow]

Yeah, I could definitely see it getting a ton of use in those areas. How long is this wrench?

The wrench is about 13.5 inches long.


Sent from my iPhone using Tapatalk

 

[MadTinkerer]

This was my nice surprise leaning up against the garage door when I got home from work today.





I can't wait to try these out. After reading a lot of pros and cons about cheaper makes in the end I decided to splurge a bit and get something I can hopefully have confidence in. They have very good reviews against slipping.





Well, I'm not sure this is totally true.

We used those to raise SLS's high enough to get the hoist arms under them. They worked well and never had a problem slipping

 

[rmalkow2]

We used those to raise SLS's high enough to get the hoist arms under them. They worked well and never had a problem slipping

Thanks for yet another good reference.

 

[ADSR]

You can't beat this 1/4 impact set for 59.99$

http://www.princessauto.com/en/deta...-sae-and-metric-impact-socket-set/A-p8475923e

 

[joshs74nova]

ATD tools 7550 master spring compressor set. Just in time to work on my Z.


Sent from my iPhone using Tapatalk

 

[Stooge]

I have that compressor under the Mountain brand and is the same as the matco one too, i like it!
http://www.tooltopia.com/mountain-90200.aspx

http://www.matcotools.com/catalog/product/MSC90200/MASTER-SPRING-COMPRESSOR-SET/

 

[vincentshumai]

New tool bag came in the mail today from Amazon!

 

[stroked383z28]

CL score for $50. Been on the fence about getting a decent creeper. Never really liked using the cheap one I have, but I figured it will look nice hanging on the wall even if I don't like it.

 

[gipraw]

This was my nice surprise leaning up against the garage door when I got home from work today.


I can't wait to try these out. After reading a lot of pros and cons about cheaper makes in the end I decided to splurge a bit and get something I can hopefully have confidence in. They have very good reviews against slipping.


Well, I'm not sure this is totally true.

I love mine and use the hell out of them. I have a set of ramps, a set of 10" blocks and a set of 12" blocks. Extremely stable and easy to use and transport.

 

[Ruger_556]

A few sockets

 

[boosteddsm92]

Scored this for $25. Not sure how old it is but it appears unused. I don't need it at all but couldn't pass it up since I totally dig the old metal cases.

 

[Kaane]

Some New things.

Vim Long Hex Sockets
Vim Long Triple Square Sockets
Grey Pneumatic 3/8 Metric Impact Hex Sockets

Genius 0 offset Extra Long Double Box Metric wrench set

Camshaft and Crankshaft Seal installer

 

[gipraw]

Scored this for $25. Not sure how old it is but it appears unused. I don't need it at all but couldn't pass it up since I totally dig the old metal cases.

I bought a set like that in the mid 80's ..

 

[Drake9]

Trying to build up my box with quality tools. Picked up this set and individuals for my 3/8 dr metric set. Still need to pick up the same set in deep.

 

[Cope]

Trying to build up my box with quality tools. Picked up this set and individuals for my 3/8 dr metric set. Still need to pick up the same set in deep.

Back in the late 1970s I bought that shallow set from a local discount store (Woolco) for around $13.00. I wish I had held on to it, but I found the same set in Cornwell and sold the SK.

 

[vertguy]

A couple 6 inch Nicholson flies (******* & 2nd cut)... made in the USA of course

After trying to us some old POS files I had, these are a huge upgrade. I need to grab a couple more styles to complete the set.

 

[hoston23]

CL score for $50. Been on the fence about getting a decent creeper. Never really liked using the cheap one I have, but I figured it will look nice hanging on the wall even if I don't like it.

is that the one that was in Burleson?? i was thinking about getting it but i couldnt justify having 3 snap on creepers. im glad it is going to a good home

 

[90zcar]

Opened up the box and took some pics of my new streamlight strion. I'm glad I got green so I can easily spot it when dropped in an engine bay I basically just deleted my need for any stupid dim cordless drop light.
My next purchase is a flashlight holder that has a magnet on it





Sent from my iPhone 5s using Tapatalk

 

[stonesfan68]

Got a new sk 45171 3/8 drive in a long 1/4 body. Got it off my previous cornwell guy turned sk dealer.

Also threw in a flippable phillips/flat head pocket screwdriver as a gift for purchasing my first sk tool from him.

What's the part number on that screwdriver?

 

[gti]

Joining the Wera, Facom AN2x75

Both have a 0.4x2mm tip. Smallest screwdrivers (of this type) offered by Wera and Facom. big size difference.

 

[dutchgray]

what's the part number on that screwdriver?

sk85112

 

[1foxracing]

EZ-Red NR5M Flexible Ratchet Wrench
http://www.amazon.com/gp/product/B002T00RLQ/?tag=atomicindus08-20

EZ-Red Kiwi Plier Set
http://www.amazon.com/gp/product/B00JSYA1MG/?tag=atomicindus08-20

EZ-Red HM1000 - 12 Piece Metric Hex Bit Set
http://www.amazon.com/gp/product/B00C7AZOD4/?tag=atomicindus08-20

KTI (KTI-51103) Needle Nose Plier Set
http://www.amazon.com/gp/product/B001GRYX7C/?tag=atomicindus08-20

Hozan JIS-5 JIS Screwdriver Set (NEW 3rd Gen.)
http://www.amazon.com/gp/product/B003F63WI8/?tag=atomicindus08-20

Was in Menards and picked these up last weekend. C.. China, not stamped on the tool but the card they were mounted to was marked.

 

[wyo george]

I recently got the same Hozan JIS screwdriver set, they are top notch!

 

[Sterff]

Nice! How do you like these and where did you buy them? They look pretty thick.

Genius 0 offset Extra Long Double Box Metric wrench set

 

[herfalerf]

I recently got the same Hozan JIS screwdriver set, they are top notch!

Yes i have them as well. Received as a gift. They are really top notch.

 

[bsaint]

My little 2 year old has already lost this. That's what I get for giving it to him to play with.

 

[Kaane]

Nice! How do you like these and where did you buy them? They look pretty thick.

I like them a lot so far. Very nice finish, and very thick.

I got them on Amazon.

http://www.amazon.com/dp/B002AIX502/?tag=atomicindus08-20

 

[upgrading]

I like them a lot so far. Very nice finish, and very thick.

I got them on Amazon.

http://www.amazon.com/dp/B002AIX502/?tag=atomicindus08-20

Was that set made in Taiwan ?

 

[kiatech]

My little 2 year old has already lost this. That's what I get for giving it to him to play with.

Dude.. that blows.
crawl around on the floor at his height and you might get lucky.

 

[Kaane]

Was that set made in Taiwan ?

Yes.

Sent from my LG-D850 using Tapatalk

 

[stonesfan68]

sk85112

Cheers.

 

[gsingh]

 

[gsingh]

Had a gift card for Matco, so I got these

All this is from a while back

 

[gsingh]

From a while back, ratchet was recent

Hammers

For holding windows

 

[gsingh]

Found a Cornwell guy today. Got these wrenches ordered.

 

[JonDick13926]

Came in the mail today, with one more item on back order.

And the back-ordered item showed up today.

 

[ADSR]

gsingh, that looks like a wallet work out for sure.

congrats on the goods, buddy!

 

[RedRabbit]

From a while back, ratchet was recent

Hammers

For holding windows

Whats the Mercedes Box thing?

 

[tn89]

Got this off the snap on man last night.

 

[Ruger_556]

MAC seal picks, mid length, and extra short sockets.





Yet another 3/8 ratchet because well, one can never have too many