Show your new tool arrivals

[AmishFury]

Went to Lowes for some flux core wire and found this deal that seemed too good to pass up.

[URL=http://s648.photobucket.com/user/freudianfloyd/media/Mobile%20Uploads/20150303_173008_zps05048731.jpg.html] [/URL]

Matches my cordless Porter Cable impact

so what exactly makes the display box gay?

 

[si_jeff]

Snap-on 1/4 inch flex ratchet, 6 piece extension set, & 12 piece 6 point metric shallow set (5-15mm)

$200 cash out the door.

Great Deal. Is this a BOGO Deal?

 

[Qualitytools]

so what exactly makes the display box gay?

It's not GAY, its the location of the tool in the store, Isle, Bay and shelf!

 

[Mohawk Dave]

Went to Lowes for some flux core wire and found this deal that seemed too good to pass up.

[URL=http://s648.photobucket.com/user/freudianfloyd/media/Mobile%20Uploads/20150303_173008_zps05048731.jpg.html] [/URL]

Matches my cordless Porter Cable impact

I love that thing. Used it for 3.5" screws in a deck all day as to not burn up battery tools.

The anvil/hammer area GETS HOT!!! But I learned it is supposed to, as it is a heat sink. I thought mine was bad at first. It wasn't. Just FYI.

 

[bobbycos]

Really liking the new impact

Is that the 8850?

Yeah

I got it and it is a monster,got the 3/8 drive version on order

Love the green color

 

[WoodShopDisaster]

This is what I got off the truck yesterday, and grabbed the tape from Lowes for $5.98.

 

[slee3247]

The sockets and extensions were a bogo for $120 cash. The ratchet was just a plus

 

[slee3247]

Just got my much awaited Snap-On SHDX60R [emoji173]

Sent from my iPhone using Tapatalk

Just be careful..salesmen tend to walk away with shiny screwdrivers. Not like you need one to screw customers over

 

[herfalerf]

Extensions are gearwrench. Got both sets for about 1/4 the price of snap-on 1/4 inch set. Not as nice but still work well. Someone stole my m12 charger and battery so I needed to replace. EBay came through with a great deal. 39.99 for charger and batter brand new.


Sent from my iPhone using Tapatalk

 

[morgantm]

Extensions are gearwrench. Got both sets for about 1/4 the price of snap-on 1/4 inch set. Not as nice but still work well. Someone stole my m12 charger and battery so I needed to replace. EBay came through with a great deal. 39.99 for charger and batter brand new.


Sent from my iPhone using Tapatalk

How much did the extensions run you?

 

[herfalerf]

How much did the extensions run you?

Just under $50 shipped for both sets from Amazon


Sent from my iPhone using Tapatalk

 

[mperry985]

I got it and it is a monster,got the 3/8 drive version on order

Love the green color

I want both..I have the ct761 and that Lil guy is great..want the other 2 in green as well

 

[ewils35]

I just got these from the tool truck today.

 

[ADSR]

I just got these from the tool truck today.

Nice! I need that belt wrench

 

[jsharpphoto]

Some red and black, comfort grip ****.

 

[Fusion13]

Some more stuff from Amazon

 

[AmishFury]

It's not GAY, its the location of the tool in the store, Isle, Bay and shelf!

i know that... just making a joke about the handwriting... reminds me of a cart someone left in the back room at my store that said "PICKS" but their P looked a little like a D

 

[GHBrumbaugh]

Fresh from Amazon.

Sent from my iPhone using Tapatalk

 

[JBradley500]

JIS in effort to stop stripping screws on my Kawasakis.

 

[hoston23]

picked this up when I bought a cam sensor at NAPA this morning. didn't need it but o well

 

[thaghost87]

Partially Homemade underhood light.

2500 lumens!!

 

[morgantm]

JIS in effort to stop stripping screws on my Kawasakis.

I have a set of those and they are fantastic.

 

[nanofrog]

JIS in effort to stop stripping screws on my Kawasakis.

If you don't mind, where'd you get them from and how much were they?

TIA

 

[PavelK313]

Received my 2763-22 and 2654-20 to complement my other Milwaukee impacts.

 

[JBradley500]

If you don't mind, where'd you get them from and how much were they?

TIA

I bought them as singles on Amazon and ebay. You could get all five for around 55-60 dollars. I doubt many people need the small ones though. They're much smaller then I expected.

 

[rockinacummins]

Just got these in from Caleb T!

Snap on underlined logo 3/4 line wrench, Plvmb 1/2, 9/16 tappet wrench, and snap on 3/8 swivel!

 

[AmishFury]

stopped by HF to see if they got the new low profile ratchets in yet (nope) looked around a while and picked these up

 

[GTA Matt]

More stuff for my home garage. Forney battery charger, Legacy hose reel with 50 foot flexilla hose, fluid evacuator, Ingersoll air hammer, Ingersoll die grinder, mountain cutoff tool, blow gun and a Fixture Point welding table.

 

[Jwych]

More stuff for my home garage. Forney battery charger, Legacy hose reel with 50 foot flexilla hose, fluid evacuator, Ingersoll air hammer, Ingersoll die grinder, mountain cutoff tool, blow gun and a Fixture Point welding table.

ive got that hose real on my service truck, pretty finicky when it comes to reeling it back in. I usually have 5-8 feet of hose that i just wrap up and over lol. also have that air hammer and it is a BEAST I love it

 

[tjmonsen5]

CT8850. Seems a lot more powerful than my old ct6850.

 

[freudianfloyd]

I love that thing. Used it for 3.5" screws in a deck all day as to not burn up battery tools.

The anvil/hammer area GETS HOT!!! But I learned it is supposed to, as it is a heat sink. I thought mine was bad at first. It wasn't. Just FYI.

I have a cordless Porter Cable and use it literally everyday. But figured this would be handy for big jobs. I have only played with it, but it did have bad smell when it was first turned on. It seems fine now.

 

[freudianfloyd]

so what exactly makes the display box gay?

I was wondering the same thing. Thought about covering that up before I took the picture, but figured it was actually a 6AY. Hope so anyway.

 

[WoodShopDisaster]

GTA Matt, let us know how you like that IR die grinder. I was looking at those for my box.

 

[GTA Matt]

GTA Matt, let us know how you like that IR die grinder. I was looking at those for my box.

It looks a lot like the Mac die grinder I have had at work for the last 8 or 9 years. Didn't put them side by side to see if they were the same, but its been great.

 

[flying eyeball]

 

[Hemi49]

JIS in effort to stop stripping screws on my Kawasakis.

Are these JIS screwdrivers?....They are labeled P2, P3, etc which would indicate Phillips tips?

 

[OHMS LAW]

Got this sweet deal. I love it and one of the ratchets I may give to my dad

 

[JAKE-THE-TOOL-MAN]

Here are some of my new tools I've picked up over the past month. Not pictured is the Blackhawk and Proto plier set from Ebay, Craftsman thread restore kit and jaw pullers, and a Snapon T72 ratchet. I have more stuff on the way as well.

 

[nanofrog]

I bought them as singles on Amazon and ebay. You could get all five for around 55-60 dollars. I doubt many people need the small ones though. They're much smaller then I expected.

It's the reverse for me; I need the smaller ones and can do without the P3 (electronics use).

Are these JIS screwdrivers

Yes, they are JIS.

 

[Rural53]

A long way from home.

The 1/2" Craftsman flex head ratchet arrived today from Illinois. The 3/8" one arrived from Missouri a couple of months ago. Both for use not polishing.