Show your new tool arrivals

[canuckian]

Is there a part number for that tool bag? Very nice combo!

CTUTOTE-G is on the tag but all I can find on the SO website is red and pink. Guessing dealers can order them separately

 

[Strouty]

Man, I love the look of the green and black!

The only problem is it gets dirty easy. Says the guy with a box full of green tools.

 

[Ruger_556]

Ordered some tools today...

 

[JAKE-THE-TOOL-MAN]

Ordered some tools today...

Can't wait to see what you got, you always get good stuff

 

[b7labelle]

Got two old hammer heads in the mail yesterday. Need to pick up some handles.

 

[littleponderosa]

Snap On new flare nut wrenches from the auction site - only 4 of 5, 1/4" X 5/16" on order from the truck dude. Too bad the driver can't seem to get off msrp with me on most of the needs and wants.

 

[Dimitri]

Picked this up from my Mac guy today, it's my day off so updating it while out to lunch with the Fiancée.

She isn't pleased.

Dimitri

 

[Stooge]

wanted to pick up a new code reader, something simple, after accidentally leaving my last one in my truck in the winter and the screen stopped working. I dont pretend to keep up with technology, but was curious about the bluetooth ones and picked up an elm327 and bought the corresponding app, all for about $28. still playing around with it and figuring it out, but pretty cool to me for the price! Dang technology!





Telling me about the intake gasket leak i knew about


Some of the live readings it has, i didnt take the time to actually go through and set up accurate parameters so its just what i punched in around the block

 

[90zcar]

Grabbed a wide fork bent plastic pry tool today to replace a harbor freight one I had. These seem a little nicer although I can't beat the hf price. Cheaper for the whole set than this one snap on pry tool



Sent from my iPhone using Tapatalk

 

[dngrmse]

Had some surprise points expiring; was able to use them on these "overstock" items.
I don't have any long ratchets, it's coarse teeth, but the finish is pretty nice.

 

[PureLeaf]

Grabbed a wide fork bent plastic pry tool today to replace a harbor freight one I had. These seem a little nicer although I can't beat the hf price. Cheaper for the whole set than this one snap on pry tool



Sent from my iPhone using Tapatalk

Those are made by Bojo. I picked up this set for 38 bucks http://www.ebay.com/itm/231544539164?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
. Great tools

http://www.bojoinc.com

 

[wttwoa]

Had some surprise points expiring; was able to use them on these "overstock" items.
I don't have any long ratchets, it's coarse teeth, but the finish is pretty nice.

what do you think of the ratchet t handle so far?

 

[warmpancakes]

Those are made by Bojo. I picked up this set for 38 bucks http://www.ebay.com/itm/231544539164?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
. Great tools

http://www.bojoinc.com

yep but Bojo wont warranty them snap on will

 

[panknuckshovel]

This was the special from the snap on kickoff earlier in the winter. Everyone else got red. My driver pieced me together the same deal in Green yeah I'm that special lol. Got some beef jerky thrown in too!

Very, very nice. Hopefully jerky wasn't green.

 

[logixjock]

Here is a picture of both sets. Metric and inch.

Those aren't listed on the website yet, but are in the May flier for $43.95 mm, and $49.95 SAE. I've been wanting something like this for a few years, going to have my driver order up a set next Wednesday.

 

[Silentt]

Received some of my SO order today. My green pry bars and hammers are back ordered until mid June lol

Ct8850

 

[canuckian]

Very, very nice. Hopefully jerky wasn't green.

thanks! used em both last night and they worked awesome! The jerky wasn't green but honestly it wasn't great tasting jerky. wonder if there's a warranty on it?

 

[dngrmse]

what do you think of the ratchet t handle so far?

It has a nice feel to it, and I'm used to using coarse tooth ratchets, that's what I grew up using, plus I'm strictly a weekend mechanic/tinkerer anyway. By the way, COO is Taiwan I know some people care about that stuff.

 

[panknuckshovel]

thanks! used em both last night and they worked awesome! The jerky wasn't green but honestly it wasn't great tasting jerky. wonder if there's a warranty on it?

Harbor Freight Jerky never tastes bad, now you know.

And no, there is no warranty. The cow was the original owner of the jerky, and as we all know the snap-on warranty does not transfer.

 

[90zcar]

yep but Bojo wont warranty them snap on will

My dealer told me that those are actually not covered by the warranty but to let him know if I ever have an issue.


Sent from my iPhone using Tapatalk

 

[Shootingblanks]

Just received Wright wrench set #915. Wright set #958, 915 and Craftsman RP standard and metric set barely fit in my HF 56" drawer.

 

[Kamanhart]

Grandpa had one of these that he used almost exclusively. Been looking for one since the one of his he promised would be mine got five fingered from the estate. Finally found one.

 

[AA/FC]

Those aren't listed on the website yet, but are in the May flier for $43.95 mm, and $49.95 SAE. I've been wanting something like this for a few years, going to have my driver order up a set next Wednesday.

Yep, that's what I paid. My driver said they've been a big seller.

 

[gsingh]

Got this today. Dealer still honored sale price from a previous sale.



Got this for free

 

[gsingh]

Just received Wright wrench set #915. Wright set #958, 915 and Craftsman RP standard and metric set barely fit in my HF 56" drawer.
]

Nice. How do you like the wright wrenches so far?

 

[brandon523]

Picked up this Trim Pad Tool yesterday from Snap On:



Then, today, I picked up the flex head ratcheting metric wrench set & bit ratchet from Mac.

 

[Tellingthem]

Maybe not a tool but got this in the mail. I had sent them a nice note about how much I like their snips (the knifti-cuts especially). Anyway they were nice enough to send not one but two t-shirts. And I was pleasantly surprised to see that the shirts are USA made as well. Really made me an even bigger fan. Thanks again Midwest snips!

 

[NUTTSGT]

Stopped by Sears today and saw some discount items. I wasn't sure what the price was but I grabbed them as they probably some of the last USA stuff.



1/2 drive, 12pt 27mm
1/2 drive, 12 pt 1 3/16"
1/2 drive, 12 pt, 1 1/8"
1/2 drive, 12 pt, 7/8" deepwell
19mm RP wrench

$1.99 each.

 

[Big Vic]

I got this today FHX80 3/8. This rachet is great for them fuel filters on the International Maxxforce engines that the damn faring is blocking. Retired my older Snap-On 30tooth rachect similar to this one with out the grip.

 

[MrAperture]

Just got me a set of SK 7750 retaining ring plier [emoji173]




Sent from my iPhone using Tapatalk

 

[MadTinkerer]

Hazet 21mm strut nut socket, ASsenmacher 8mm glow plug socket, a Lang hub holder and an otc cv boot clamp installer

 

[garthg]

Got a new DeWalt 18V cordless impact driver. Of course, you have to buy the kit with two batteries, charger, driver/drill and carry bag. Last one at Home Depot. Got the manager to give me a 10% (15% at the register) open-box discount, $122. (The driver alone is $99).

Oh, "Built in USA" (from global parts, etc.)

Stopped at a Snap On truck near the Walmart parking lot and got the 1/4" drive adaptor. I always believe in getting good bits and accessories. $15 (list is $18)

I've got a Snap On 112SIMTMM 1/4" drive impact set coming from a pawnshop on ebay, like new, for $90 ($218 list).

I'm looking forward to using these to put my MINI Cooper S in "service mode". I think there's about 22 fasteners altogether to get the front bumper and cover and frame extension tubes off.

 

[Johnk781]

Would you have the part number for the Precision Torque wrench set? Can't seem to find it on the website.

 

[Cruzomatic]

Got this in....

 

[brandon523]

Would you have the part number for the Precision Torque wrench set? Can't seem to find it on the website.

SRWMF212PTA - I couldn't find them listed on the website either, just like the bit ratchet that I bought. Out of my last three purchases off the Mac truck, I haven't been able to find any of them on the website. They were $299.99 with an $8.00 discount.

 

[rmalkow2]

You can't beat free right? Well a good friend surprised me yesterday with these two freebies. A GearWrench carburetor adjusting tool and a Were 0,8 x 4,0 screwdriver to add to my set.
Thanks buddy and I love free!

 

[Shootingblanks]

Nice. How do you like the wright wrenches so far?

I really like them and they are really balanced nicely.

 

[Sam'sAutoParts]

GW reversible ratcheting wrench sets. Got them from Advance over the last few weeks after sale price and speed perks they only cost me $20 for both sets

 

[Spudd4242]

Not a tool. But cool none the less! And made in the USA! Picked up in a pawn shop for $5




Sent from my toaster, using toast talk

 

[90zcar]

Got this stuff today at a yard sale for a total of $9.75

I first offered him $5 for the screwdriver and he took it no problem so after that I knew hed go super cheap. Got the 56oz snap on dead blow for $3 bux!

Total list
Snap on dead blow $3
Snap on p3 screwdriver $5
Matco 13/16 1/2 impact socket .75 cents
Mac t40 .50cents
Craftsman USA 3" 3/8 ext .50 cents




Sent from my iPhone using Tapatalk