Show your new tool arrivals

[flying eyeball]

 

[AmishFury]

should have my set sometime today... we'll see just what level of chaos the contents arrive in

 

[turmlos]

I got the Wilde chisel holder years ago. Try as I might I just can't keep it locked on the chisel. I use it when I really need to swing hard with a big hammer so there is a lot of vibration.

Three or four good hits and it starts to come loose.

I have the same problem with my Craftsman, although it is a different design (C-frame). Yours appears to have a jam nut in addition to the threaded chisel holder. Have you tried tightening that down before wailing on it?

 

[flying eyeball]

snug it up

 

[90zcar]

Finally had to put my 10 dollar radio shack soldering iron to rest that lasted me well over 10 years. Got a weller iron at lowes today for 22 bucks. Seems nice and good reviews. And got a magnifying glass
Old one


Lowes today



Sent from my iPhone using Tapatalk

 

[Dennis Leigh Henry]

Ohhhhh Im gunna have to get me one of those, keep us posted on how they fair!

RatZ1LLa - how much did they set you back if you don't mind sharing?? Nice Set.. !!

 

[thegroundpounder99]

New addition to my growing new MAC 90 tooth ratchets...
----------------------------------------------------------------------------

I am a ToolAholic, Sometimesi regret it, especially when the Toolman won't give me no credit


------------------------------------------------------------
I am a ToolAholic, Sometimes I regret it, Especially when the Toolman won't give me no credit

Damn that's a nice looking ratchet. I may have to get one of them.




Sent from my iPhone using Tapatalk

 

[RatZ1LLa]

RatZ1LLa - how much did they set you back if you don't mind sharing?? Nice Set.. !!

It came out to about 55$ with shipping from a third party on Amazon, MatKri Supply.

 

[oholto]

Snap On 1/2" Industrial finish

VIM Master Hex bit set

Craftsman Bolt Extractor set

Lang Snap Ring Plier set

 

[Zeroek]

New addition to my growing new MAC 90 tooth ratchets...
----------------------------------------------------------------------------

I am a ToolAholic, Sometimesi regret it, especially when the Toolman won't give me no credit


------------------------------------------------------------
I am a ToolAholic, Sometimes I regret it, Especially when the Toolman won't give me no credit

I want one of those ratchets so bad. No Mac Dealer and don't see them on their website.

 

[jlipsky14]

Snap On 1/2" Industrial finish

VIM Master Hex bit set

Craftsman Bolt Extractor set

Lang Snap Ring Plier set

What do you think of the Lang snap ring pliers? I have been looking at that set for a while now and may finally order the set after needing some yesterday.

 

[RatZ1LLa]

What do you think of the Lang snap ring pliers? I have been looking at that set for a while now and may finally order the set after needing some yesterday.

I picked up that set recently also and I can see why so many brands use them as their OEM to rebrand. They have worked well for me so far and for $73 when I bought it why not when Williams rebrands for $300.

 

[AmishFury]

and this is the utter chaos they were in when i opened the set

 

[Dennis Leigh Henry]

It came out to about 55$ with shipping from a third party on Amazon, MatKri Supply.

Not bad.. Thanks for sharing...

 

[whitetrash1]

Just had these come in
Don't mind the mess. Still moving into this house

 

[McFarmer]

I have the same problem with my Craftsman, although it is a different design (C-frame). Yours appears to have a jam nut in addition to the threaded chisel holder. Have you tried tightening that down before wailing on it?

Yeah, If there was a hex bolster in front of the handle so you could put some torque on it before locking with the jam nut it would be better.

The jam nut just locks in however tight you twist the handle. Which in my case must not be tight enough.

 

[dodge610]

and this is the utter chaos they were in when i opened the set

Man what a mess I would call them and ask for some to be knocked off the price. Looks like UPS didnt do there job.

 

[mark.dziamski]

New from the Matco truck



Sent from my XT1254 using Tapatalk

 

[FOCUS.FREAK]

New from the Matco truck



Sent from my XT1254 using Tapatalk

What do you use these for?

 

[mark.dziamski]

What do you use these for?

They are for the 12 pt bolts on u-joints for heavy duty trucks

Comes with 3/8", 1/2", 12mm & 13mm

Sent from my XT1254 using Tapatalk

 

[AmishFury]

Man what a mess I would call them and ask for some to be knocked off the price. Looks like UPS didnt do there job.

well they were shipped fedex

 

[cliftonbros89]

First ever Wiha tools. I'm usually USA only anymore. Buying can make an exception now and then. Defiantly won't be used all the time but I thought it may come in handy.

 

[ex-x-fire]

Snap on triple square set 6-18. In 3/8 & 1/2 drive. On special for $128. (not my picture) I needed a good set of these for awhile now.

 

[Strouty]

My driver tried to sell me those, but I have not had a need for them yet. I told him I will know where to get them when I do.

 

[ex-x-fire]

I think the normal price is well over 200 bucks.

 

[90zcar]

My driver tried to sell me those, but I have not had a need for them yet. I told him I will know where to get them when I do.

Same here. Don't really use them all but a time or two a year so I bought the VIM set for 30 bucks off of amazon


Sent from my iPhone using Tapatalk

 

[Skin]

My driver tried to sell me those, but I have not had a need for them yet. I told him I will know where to get them when I do.

All over German vehicles. If you ever decide to buy one or work on them you'll need them. Otherwise XZN is very rare State side.

 

[DieselJH]

New from the Matco truck



Sent from my XT1254 using Tapatalk

Do you have a part number for that set? I was just looking at the individual ones in the snap on catalog earlier.

 

[scott917]

I have never seen a truck, all I see are the Snap-on and Mac round here.



I already found that, having a site but no online shop is useless to me.

I always seem to find a Cornwell Truck when it is rush hour. Or he is going in the exact opposite direction and there is no way for me to catch him. I would like a few things from one of them. But to be honest I am not out and about much either. I will catch one of them one of these days.

S

 

[Zeroek]

Snap On 1/2" Industrial finish

VIM Master Hex bit set

Craftsman Bolt Extractor set

Lang Snap Ring Plier set

I recently got the Lang snap ring plier set too. I was going to get a matco set but why waste the money when the Lang set is like the same.

 

[GTL]

KTC AE92 Hose Clamp Pliers

 

[mdd1986]

Snap on triple square set 6-18. In 3/8 & 1/2 drive. On special for $128. (not my picture) I needed a good set of these for awhile now.

These are must haves if you ever do any work on VW/Audis. Well worth the price in my opinion. I have the same set and use them pretty often. They are very durable.

 

[mark.dziamski]

Do you have a part number for that set? I was just looking at the individual ones in the snap on catalog earlier.

SCP4DL

Sent from my XT1254 using Tapatalk

 

[Strouty]

I had to go three pages over to read the PN.

 

[cowboy73]

Just got these in the mail from Amazon About $44 with shipping included. Gearwrench 3pc. body clip plier set.

View media item 53151

 

[b7labelle]

Got my Sunex 2569 and 3580 sets today! Along with some Wera Torx key set............................and who doesn't love fresh whiteboard markers!?

 

[DC631]

Please start a new thread with detailed pics and a review! I've been eyeing that welder but haven't pulled the trigger

Ok will do

 

[Ruger_556]

 

[MrAperture]

Bday gift to myself 500lb Transmission jack [emoji173]


and a beauty shot with my 72" toolbox




Sent from my iPhone using Tapatalk

 

[NoahG]

Picked up some things on my wish list.


Also digging thru clearance bins at local hardware stores is addictive.



Sent from my iPad using Tapatalk